Abstract:Intricate relationships between transport phenomena, reaction mechanisms, and mechanical aspects likely affect the durability of solid oxide fuel cell (SOFC) stack. This study presents a modeling framework that combines thermo-electro-chemo models (including the methanol conversion process and the electrochemical reactions of the carbon monoxide as well as the hydrogen) and a contact thermo-mechanical model that considers the effective mechanical properties of composite electrode material. Detailed parametric studies are performed focusing on the inlet fuel species (hydrogen, methanol syngas) and flow arrangements (co-flow, counter-flow) under typical operating conditions (operating voltage 0.7 V), and performance indicators of the cell, such as the high-temperature zone, current density, and maximum thermal stress were discussed for parameter optimization. The simulated results show that the high temperature zone of the hydrogen-fueled SOFC is located at the central part of units 5, 6, and 7, and the maximum value is about 40 K higher than that of methanol syngas-fueled SOFC. The charge transfer reactions can occur throughout the cathode layer. The counter-flow improves the trend of the current density distribution of hydrogen-fueled SOFC, while the effect on the current density distribution of methanol syngas-fueled SOFC is small. The distribution characteristics of the stress field within SOFC are extremely complex, and the inhomogeneity of the stress field distribution can be effectively improved by feeding methanol syngas. The counter-flow improves the stress distribution state of the electrolyte layer of methanol syngas-fueled SOFC, and the maximum tensile stress value is reduced by about 37.7%.

Mathematical Modeling of a Porous Media Burner Based Methane Flame Fuel Cell

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Power and Heat Co-Generation by Micro-Tubular Flame Fuel Cell on a Porous Media Burner

Modeling and Numerical Simulations of Planar Solid Oxide Fuel Cell

Mathematical modeling of solid oxide fuel cells at high fuel utilization based on diffusion equivalent circuit model

Computational fluid dynamics numerical simulation of molten carbonate fuel cells

A Modified Dusty Gas Model in the Form of a Fick's Model for the Prediction of Multicomponent Mass Transport in a Solid Oxide Fuel Cell Anode

Numerical Simulation of Multi-Channel Planar Solid Oxide Fuel Cell Unit by Integrating Continuum Micro-Scale Pen Sub-Model

Modeling and Simulation of High Temperature Direct Internal Reforming Solid Oxide Fuel Cell

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Modeling Validation and Simulation of an Anode Supported Sofc Including Mass and Heat Transport, Fluid Flow and Chemical Reactions

The Thermal Effects of All Porous Solid Oxide Fuel Cells

Numerical Simulation of Methane Combustion in Two-Layer Porous Media Under Oxy-Fuel Condition

Multi-Physics Modeling of Solid Oxide Fuel Cell Fueled by Methane and Analysis of Carbon Deposition

Mathematical Modeling of Direct Formate Fuel Cells Incorporating the Effect of Ion Migration

Modeling of All-Porous Solid Oxide Fuel Cells with a Focus on the Electrolyte Porosity Design

Pore Scale Investigation of Gaseous Mixture Flow in Porous Anode of Solid Oxide Fuel Cell

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Co-Oxidation Modeling for a Syngas-Supplied Microtubular Solid Oxide Fuel Cell

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Lattice Boltzmann Modeling of Carbon Deposition in Porous Anode of a Solid Oxide Fuel Cell with Internal Reforming