Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

Mathematical modeling of solid oxide fuel cells at high fuel utilization based on diffusion equivalent circuit model

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Numerical modeling of an anode-supported SOFC button cell considering anodic surface diffusion

A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA

Evaluating the effectiveness of the modified multi-scale multi-physics coupled model for solid oxide fuel cells: A comparative analysis

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Modeling of cooperative defect transport and thermal mismatch in a planar solid oxide fuel cell

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

Numerical Simulation of Tubular Solid Oxide Fuel Cells

Elementary reaction modeling and experimental characterization of solid oxide fuel-assisted steam electrolysis cells

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation

Mechanistic Model Development and Performance Study of Cathode-Supported Tubular Solid Oxide Fuel Cell

A single-phase, non-isothermal model for PEM fuel cells

A combined approach of Lattice Boltzmann Method and Maxwell-Stefan equation for modeling multi-component diffusion in solid oxide fuel cell

A General Mechanistic Model of Solid Oxide Fuel Cells

An Isomorphic Multi-Energy Circuit Analysis Method for Multi-Stack SOFC Systems Considering Nonlinear Electrochemical Reaction and Gas Transport

Mathematical Modeling of a Porous Media Burner Based Methane Flame Fuel Cell

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Momentum-species-heat-electrochemistry distribution characteristics within solid oxide fuel cell stack with complex inter-digital fuel channels