Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Combustion Modeling and Simulation of Recycled Anode-off-Gas from Solid Oxide Fuel Cell

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Simulation of a Flat-Tube Solid Oxide Fuel Cell with Symmetric Double-Sided Cathode Considering Different Fuel Compositions

Modeling Validation and Simulation of an Anode Supported Sofc Including Mass and Heat Transport, Fluid Flow and Chemical Reactions

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

Numerical Simulation of an Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures

Numerical Simulation of Solid Oxide Fuel Cells Comparing Different Electrochemical Kinetics

Numerical Simulation of Processes in an Electrochemical Cell Using COMSOL Multiphysics

Multiphysics Simulation of a Solid Oxide Fuel Cell Based on COMSOL Method

Modeling and Numerical Simulations of Planar Solid Oxide Fuel Cell

Co-Oxidation Modeling for a Syngas-Supplied Microtubular Solid Oxide Fuel Cell

Influences of Hydrogen-Natural Gas Mixtures on The Performance of an Internal Reforming Solid Oxide Fuel Cell Unit: A Simulation Study

Structure optimization and thermal field analysis of biogas derived methane fueled Solid Oxide Fuel Cell

Numerical Simulation of a Direct Internal Reforming Solid Oxide Fuel Cell Using Computational Fluid Dynamics Method

Computational Fluid Dynamics Modeling of Combustion Characteristics of a CH4/O2 Combustor in a Copper Anode Furnace

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Modeling and Simulation of High Temperature Direct Internal Reforming Solid Oxide Fuel Cell

Simulation of Eco-Friendly and Affordable Energy Production Via Solid Oxide Fuel Cell Integrated with Biomass Gasification Plant Using Various Gasification Agents

Improvement of the SOFC System by Anode Recirculation