Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Detailed 3D multiphysics modeling of an ammonia-fueled solid oxide fuel cell: Anode off-gas recirculation and Ni nitriding degradation

Multiscale multiphysics modeling of ammonia-fueled solid oxide fuel cell: Effects of temperature and pre-cracking on reliability and performance of stack and system

Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode

Study of thermal effects in ammonia-fueled solid oxide fuel cells

Understanding Degradation Behavior of Direct-Ammonia Solid Oxide Fuel Cells Using Nanoscale Analyses

Enhanced Stability and Electrochemical Investigations of Ni/Zsm-5 Catalyst Layer on Nickel-Based Anodes for Ammonia-Fed Solid Oxide Fuel Cells

Performance Evaluation of Ammonia-Fueled Flat-Tube Solid Oxide Fuel Cells with Different Build-in Catalysts

Optimizing ammonia-fueled planar SOFCs for low-temperature operation: Multiphysics simulation and performance sensitivity analysis

NH3-Fed Patterned Electrode Solid Oxide Fuel Cell: Experimental Performance Characterization and Elementary Reaction Modeling

Challenges and Advancements in the Electrochemical Utilization of Ammonia Using Solid Oxide Fuel Cells

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Direct utilization of ammonia in intermediate-temperature solid oxide fuel cells

Improved Performance of Ammonia-Fueled Solid Oxide Fuel Cell with Ssz Thin Film Electrolyte and Ni-Ssz Anode Functional Layer

Reducing temperature difference of a direct ammonia tubular SOFC to 1K

Direct Conversion of Ammonia to Electricity on a PCFC and an SOFC

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Operation of a Solid Oxide Fuel Cell Based Power System with Ammonia as a Fuel: Experimental Test and System Design

A simple, feasible, and non-hazardous laboratory evaluation of direct ammonia solid oxide fuel cells fueled by aqueous ammonia

Coupling Ammonia Catalytic Decomposition and Electrochemical Oxidation for Solid Oxide Fuel Cells: A Model Based on Elementary Reaction Kinetics

Multi-Physics Modeling Assisted Design of Non-Coking Anode for Planar Solid Oxide Fuel Cell Fueled by Low Steam Methane

Ammonia as an effective hydrogen carrier and a clean fuel for solid oxide fuel cells