Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

NH3-Fed Patterned Electrode Solid Oxide Fuel Cell: Experimental Performance Characterization and Elementary Reaction Modeling

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Coupling Ammonia Catalytic Decomposition and Electrochemical Oxidation for Solid Oxide Fuel Cells: A Model Based on Elementary Reaction Kinetics

Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

Modeling and Optimizing Anode Catalyst Layer for Direct Ammonia Fuel Cell

Detailed 3D multiphysics modeling of an ammonia-fueled solid oxide fuel cell: Anode off-gas recirculation and Ni nitriding degradation

Enhanced Stability and Electrochemical Investigations of Ni/Zsm-5 Catalyst Layer on Nickel-Based Anodes for Ammonia-Fed Solid Oxide Fuel Cells

Lattice Boltzmann Modelling of the Coupling Between Charge Transport and Electrochemical Reactions in a Solid Oxide Fuel Cell with a Patterned Anode

Insight into the complex ammonia decomposition/oxidation kinetics in ammonia protonic ceramic fuel cells via elementary modeling

Cross-scale Transient Analysis and Optimization of Electrode Morphology Evolution in Direct-Ammonia Solid Oxide Fuel Cells

Coupling mechanism of mass transport and electrochemical reaction within patterned anode of solid oxide fuel cell

Performance Evaluation of Ammonia-Fueled Flat-Tube Solid Oxide Fuel Cells with Different Build-in Catalysts

Challenges and Advancements in the Electrochemical Utilization of Ammonia Using Solid Oxide Fuel Cells

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Study of thermal effects in ammonia-fueled solid oxide fuel cells

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

Elementary reaction kinetic model of an anode-supported solid oxide fuel cell fueled with syngas

Direct Conversion of Ammonia to Electricity on a PCFC and an SOFC

Elementary Reaction Models for CO Electrochemical Oxidation on an Ni/YSZ Patterned Anode

Multi-Physics Modeling Assisted Design of Non-Coking Anode for Planar Solid Oxide Fuel Cell Fueled by Low Steam Methane