Abstract:This study investigates the ultrasonic-microwave synergistic intensive leaching of indium from zinc oxide dust and compares it with conventional leaching, single ultrasonic leaching, and microwave leaching. Additionally, the temperature rise behavior of zinc oxide dust in a sulfuric acid system is examined. The results demonstrate that ultrasonic-microwave co-leaching significantly reduces leaching time compared with conventional leaching and improves the leaching rate of indium compared with single ultrasonic leaching and microwave leaching. The optimal process conditions for ultrasonic-microwave synergistic leaching are determined to be an ultrasonic power of 200 W, microwave power of 200 W, leaching time of 30 min, sulfuric acid concentration of 180 g L −1 , and liquid to solid ratio of 8:1. Under these conditions, the leaching rates of indium, zinc, aluminum, and iron are 91.25, 97.69, 74.57, and 48.62%, respectively. In contrast, under the same conditions, the leaching rates of indium and zinc by single ultrasonic leaching were 89.01 and 94.12%, respectively, and the leaching rates of indium and zinc by single microwave leaching were 88.59 and 95.59%, respectively. These findings indicate a synergistic effect of ultrasound and microwave. The accuracy of the single factor optimization experiment results was verified using the response surface analysis method to optimize the experimental conditions. The results indicated that the single factor optimization experiment was accurate. Studies in chemical kinetics studies demonstrated that the leaching of indium is primarily influenced by ultrasound microwave power and sulfuric acid concentration. Additionally, the leaching process is governed by chemical reactions. Arrhenius diagram was used to plot the (1/ W –ln K ) and (ln[H 2 SO 4 ] − ln K ) diagrams. The reaction coefficient for ultrasound-microwave is − 7.5, and the reaction order for sulfuric acid is 0.815. The chemical kinetic models are: 1 − (1 − x ) 1/3 = exp(− 4.12 − 7.5/W). t , 1 − (1 − x ) 1/3 = exp(− 4.654 + 0.815ln[H 2 SO 4 ]). t . The mechanism of ultrasonic-microwave synergistic enhancement for leaching indium from zinc oxide dust was elucidated. This research introduces a novel method for indium leaching, which holds significant theoretical and practical implications. Future research should focus on enhancing the amplification technology of ultrasonic-microwave leaching equipment.

Effect of Microwave-Assisted Heating on Chalcopyrite Leaching of Kinetics, Interface Temperature and Surface Energy

Effect of Ultrasound on the Oxidative Copper Leaching from Chalcopyrite in Acidic Ferric Sulfate Media

Dissolution of Copper and Nickel Mine Tailings in Sulfuric Acid Heated with Microwave

Drying Kinetics of Microwave-Assisted Drying of Leaching Residues from Hydrometallurgy of Zinc

Study on Characteristics of Microwave Melting of Copper Powder

Efficiency and sustainable leaching process of manganese from pyrolusite-pyrite mixture in sulfuric acid systems enhanced by microwave heating

Leaching kinetics of manganese from pyrolusite using pyrite as a reductant under microwave heating

Study on the kinetics and mechanism of ultrasonic-microwave synergistic enhancement for leaching indium from zinc oxide dust

Microwave-enhanced reduction of manganese from a low-grade pyrolusite ore using pyrite: process optimization and kinetic studies

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Microwave Treatment of Copper–Nickel Sulfide Ore for Promotion of Grinding and Flotation

Eco-friendly oxidation leaching from chalcopyrite powder and kinetics assisted by sodium chloride in organic acid media

Interaction of dry and water-saturated uranium ore with microwave and enhanced extraction of uranium

Electrochemical characterizations and galvanic effect of chalcopyrite leaching and passivation-A review

Recovery of copper from bioleaching residues containing chalcopyrite through calcination-leaching: Emphasis on the presence of pyrite

Ammonia Leaching of Zinc from Low-grade Oxide Zinc Ores Using the Enhancement of the Microwave Irradiation

Comparative Study of Microbial Contact Effect on Complex Copper Sulfide Concentrate Containing Enargite, Covellite and Digenite

Basic research on the microwave absorbing properties and microwave roasting kinetic of cyanide tailings

Effectiveness of microwave-assisted thermal treatment in the extraction of gold in cyanide tailings

Comparative Studies on the Dissolution of Ceramic UO2 Pellets in Nitric Acid by Microwave and Conventional Heating

Research on Micro-disseminated Gold Ore byMicrowave Roasting Pretreatment