Abstract:This study investigates the ultrasonic-microwave synergistic intensive leaching of indium from zinc oxide dust and compares it with conventional leaching, single ultrasonic leaching, and microwave leaching. Additionally, the temperature rise behavior of zinc oxide dust in a sulfuric acid system is examined. The results demonstrate that ultrasonic-microwave co-leaching significantly reduces leaching time compared with conventional leaching and improves the leaching rate of indium compared with single ultrasonic leaching and microwave leaching. The optimal process conditions for ultrasonic-microwave synergistic leaching are determined to be an ultrasonic power of 200 W, microwave power of 200 W, leaching time of 30 min, sulfuric acid concentration of 180 g L −1 , and liquid to solid ratio of 8:1. Under these conditions, the leaching rates of indium, zinc, aluminum, and iron are 91.25, 97.69, 74.57, and 48.62%, respectively. In contrast, under the same conditions, the leaching rates of indium and zinc by single ultrasonic leaching were 89.01 and 94.12%, respectively, and the leaching rates of indium and zinc by single microwave leaching were 88.59 and 95.59%, respectively. These findings indicate a synergistic effect of ultrasound and microwave. The accuracy of the single factor optimization experiment results was verified using the response surface analysis method to optimize the experimental conditions. The results indicated that the single factor optimization experiment was accurate. Studies in chemical kinetics studies demonstrated that the leaching of indium is primarily influenced by ultrasound microwave power and sulfuric acid concentration. Additionally, the leaching process is governed by chemical reactions. Arrhenius diagram was used to plot the (1/ W –ln K ) and (ln[H 2 SO 4 ] − ln K ) diagrams. The reaction coefficient for ultrasound-microwave is − 7.5, and the reaction order for sulfuric acid is 0.815. The chemical kinetic models are: 1 − (1 − x ) 1/3 = exp(− 4.12 − 7.5/W). t , 1 − (1 − x ) 1/3 = exp(− 4.654 + 0.815ln[H 2 SO 4 ]). t . The mechanism of ultrasonic-microwave synergistic enhancement for leaching indium from zinc oxide dust was elucidated. This research introduces a novel method for indium leaching, which holds significant theoretical and practical implications. Future research should focus on enhancing the amplification technology of ultrasonic-microwave leaching equipment.

Ammonia Leaching of Zinc from Low-grade Oxide Zinc Ores Using the Enhancement of the Microwave Irradiation

Mechanism Analysis and Experimental Research on Leaching Zn from Zinc Oxide Dust with an Ultrasound-Enhanced NH3-NH4Cl-H2O System

Effect of Iron Reduction Degree on Zinc Leaching from Low-grade Zinc Oxide Ore with Sulfuric Acid

Melting-reduction of Low-grade Zinc Oxide Ores

EXPERIMENTAL STUDY ON THE REDUCTION OF IRON ORE AND COAL MIXED PELLETS OF HIGH PHOSPHORUS HEMATITE PRE-TREATED BY MICROWAVE IRRADIATION

Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder

Phase Transformation and Zinc Extraction from Zinc Ferrite by Calcium Roasting and Ammonia Leaching Process

Harnessing Microwave Technology for Enhanced Recovery of Zinc from Industrial Clinker

Investigations on the Thermodynamics Characteristics, Thermal and Dielectric Properties of Calcium-Activated Zinc-Containing Metallurgical Residues

A Study on the Mechanism and Kinetics of Ultrasound-Enhanced Sulfuric Acid Leaching for Zinc Extraction from Zinc Oxide Dust

Study on the kinetics and mechanism of ultrasonic-microwave synergistic enhancement for leaching indium from zinc oxide dust

Phase Transformation Analysis and Process Optimisation of Low-Grade Lead–Zinc Oxysulphide Ore Carbothermal Reduction

Enhancement of Uranium Recycling from Tailings Caused by the Microwave Irradiation-Induced Composite Oxidation of the Fe-Mn Binary System.

Hydrometallurgical Process for Zinc Recovery from C.Z.O. Generated by the Steelmaking Industry with Ammonia–Ammonium Chloride Solution

Mechanism Research on Raising the Grade of Iron and Dephosphorization for High Phosphorus Hematite in Microwave Field

Study on Beneficiation of A Refractory Low Grade Oxidized Zinc Ore

Recent developments on the removal of zinc from electric arc furnace dust by using microwave heating

Separation of Zinc from Zinc Ferrite by Magnetization Roasting and Ammonia Leaching

Research on Micro-disseminated Gold Ore byMicrowave Roasting Pretreatment

Extraction of lead from electrolytic manganese anode mud by microwave coupled ultrasound technology

Microwave-intensified treatment of low-zinc EAF dust: A route toward high-grade metallized product with a focus on multiple elements