Abstract:The mechanochemical leaching (MCL) process presents promising potential for efficiently extracting zinc from zinc oxide ores. This study analyzed the effects of several grinding parameters, including the agitator type, grinding ball size and material, grinding ball addition, and stirring speed, on the zinc leaching. Among them, the agitator type affects the flow form and mass transfer rate of the solution, the grinding ball size and material affects the crushing effect of the mineral powder, the grinding ball addition affects the state of motion of the grinding ball, and the stirring speed affects the grinding effect of the grinding ball on the mineral powder, which in turn affects the extraction of zinc. Experimental results show that optimization of these grinding parameters results in higher zinc leaching rates at lower energy costs. Under optimal conditions, the zinc leaching rate can reach 86.02% through the optimized MCL process, which is 9.38% higher than the conventional leaching process. Analysis techniques, such as XRD, particle size analysis, SEM-EDS, and EPMA, were utilized to examine leaching residues. The leaching mechanism of MCL process is derived under mechanical activation to destroy the insoluble product layer of zinc oxide ores (such as gangue), expose the zinc containing components, change the physical and chemical properties (such as mineral structure, particle size, and specific surface area), and enhance the reactivity of zinc oxide ore, and enhancing zinc leaching. The optimized MCL process offers the benefits of a straightforward process, reduced energy consumption, and eco-friendliness. This process has vast potential in the development and utilization of low-grade refractory zinc oxide ores in the Lanping area.

Harnessing Microwave Technology for Enhanced Recovery of Zinc from Industrial Clinker

Improving Zinc Recovery from Steelmaking Dust by Switching from Conventional Heating to Microwave Heating

Ammonia Leaching of Zinc from Low-grade Oxide Zinc Ores Using the Enhancement of the Microwave Irradiation

Recent developments on the removal of zinc from electric arc furnace dust by using microwave heating

Investigations on the Thermodynamics Characteristics, Thermal and Dielectric Properties of Calcium-Activated Zinc-Containing Metallurgical Residues

Microwave Hydrothermal Sulfidation Process for Zinc-Containing Plating Sludge

Microwave-intensified treatment of low-zinc EAF dust: A route toward high-grade metallized product with a focus on multiple elements

Treatment of Blast Furnace Gas Washing Water by Utilization of Coagulation Associated with Microwave

Processing of Waste from Enrichment with the Production of Cement Clinker and the Extraction of Zinc

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Drying Kinetics of Microwave-Assisted Drying of Leaching Residues from Hydrometallurgy of Zinc

Microwave irradiation coupled with zero-valent iron that enhances the composite geopolymerization of chromite ore processing residue and its mechanisms

Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder

Mineral Evolution Mechanism of Zinc-slag during High-temperature Reactive Process

The sulfidation behavior of zinc during microwave hydrothermal sulfidation of heavy metal-containing sludge

Electromagnetic Technology to Utilize Zinc-Containing Slags of Copper-Smelting Production and Dusts of Blast Furnace and Steelmaking Production

New Approach to the Utilization of Microwave Thermal Energy: Desulfurization and Decarburization of Spent Catalyst Via Microwave Treatment

Zinc Recovery from Hazardous Construction Wastes Via an Integrated Process of the Air Classification, Alkaline Leaching, and Water Washing

Modeling of Non-Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation

Studies on zinc recovery from technogenic waste

Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust