Abstract:In this work, heavy metals in municipal solid waste incineration (MSWI) fly ash from circulating fluidized bed (CFB) and grate furnaces were solidified by microwave-assisted hydrothermal treatment. Three process additives of NaOH, Na2HPO4, and H2O were investigated to identify the optimal additive for most fly ash samples. The standard solid waste extraction procedure for measuring leaching toxicity, namely, the acetic acid buffer solution method (HJ/T 300-2007), was used to determine the heavy metal toxicity of all samples and experimental products. X-ray fluorescence, X-ray diffraction, and inductively coupled plasma atomic emission spectroscopy were used to determine the characteristics of fly ash, including chemical compositions, mineral structures, and leaching concentrations of heavy metals. The experimental results revealed that Na2HPO4 was an efficient additive in the microwave-assisted hydrothermal process for solidifying heavy metals in fly ash. Under certain conditions, heavy metals were cured completely with only 20 min of microwave heating. Several types of zeolites were formed during the disposal process, which contributed to the solidification of heavy metals. Moreover, PO43-ions also played an important role in curing heavy metals. Microwave-assisted hydrothermal treatment with the Na2HPO4 additive is demonstrated as an effective method for disposal of MSWI fly ash before transfer to landfills. Compared with previous studies, microwave assisted hydrothermal treatment offers a promising technology for management of MSWI fly ash with high efficiency and energy savings.

Microwave Hydrothermal Sulfidation Process for Zinc-Containing Plating Sludge

The sulfidation behavior of zinc during microwave hydrothermal sulfidation of heavy metal-containing sludge

High-efficiency and low-carbon remediation of zinc contaminated sludge by magnesium oxysulfate cement

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Hydrothermal treatment coupled with pyrolysis and calcination for stabilization of electroplating sludge: Speciation transformation and environmental risk of heavy metals

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

The removal of copper and zinc from swine wastewater by anaerobic biological-chemical process: Performance and mechanism

Harnessing Microwave Technology for Enhanced Recovery of Zinc from Industrial Clinker

Study on the Removal of Chloride Ions in an Acidic Solution of Zinc Smelting by Green Method

The recovery of sulfur as ZnS particles from sulfide-contained wastewater using fluidized bed homogeneous crystallization technology

Recent developments on the removal of zinc from electric arc furnace dust by using microwave heating

Zinc recovery from metallurgical slag and dust by coordination leaching in NH3–CH3COONH4–H2O system

Improving Zinc Recovery from Steelmaking Dust by Switching from Conventional Heating to Microwave Heating

Mechanochemical Thioglycolate Modification of Microscale Zero‐Valent Iron for Superior Heavy Metal Removal

Enhanced Treatment of Antimony Mine Wastewater by Sulfidated Micro Zerovalent Iron (S-mZVI)

Preparation of Modified Manganese Slag Slurry for Removal of Hydrogen Sulphide and Phosphine

Performance and mechanisms of microwave-assisted zerovalent iron/pyrite for advance remediation of strongly alkaline high Cr(VI) contaminated soil

Efficient removal of As, Cu and Cd and synthesis of photo-catalyst from Cu-smelting waste acid through sulfide precipitation by biogenic gaseous H2S produced by anaerobic membrane bioreactor

Experimental and simulation assessment to mitigate the emission of sulfide toxic gases and removing main impurities from Zn + Pb + Cu recovery plants

Oxidative Dissolution Process of Sphalerite in Fe2(SO4)3-O3 System: Implications for Heavy Metals Removal and Recovery

Sulfidation of Smithsonite via Microwave Roasting under Low-Temperature Conditions