Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. An emerging advancement in the field of metallic materials casting is the in-situ microwave casting of metallic materials. To achieve this, the microwave heating process is applied within the applicator cavity, working on the principles of hybrid microwave heating (MHH). This process involves melting the charge, pouring it into an in-situ container, and subsequently solidifying the melted charge. The electromagnetic and thermal properties of the charge influence the interactions between the microwave energy and the material, as well as the melting behavior induced by the microwaves. As for the solidification process, this is also controlled by a cooling condition within the applicator. The present study aims to outline an in-situ casting process for copper-based composite castings fabricated within a multimode cavity, utilizing 900 W at 2.45 GHz. The quality of the developed in-situ cast was assessed by analyzing its characteristics. A microstructural examination revealed that the composite castings exhibited a homogeneous and dense structure. Scanning electron microscopy (SEM) and Energy-dispersive spectroscopy (EDS) analysis was conducted across the casting. The XRD pattern confirmed the presence of major peaks of copper in the composite castings, along with the presence of oxide phases such as Cu64O. Also, the micro indentation hardness of the Cu + 1.5%MWCNT casts was found to be 1.23 times higher than that of microwave-processed pure copper.

Study on Characteristics of Microwave Melting of Copper Powder

Microwave Heating of Pure Copper Powder with Varying Particle Size and Porosity

Analysis of microwave heating of copper powder compacts

Application of Microwave Melting for the Recovery of Tin Powder

Study on Microwave Heating Order and Electromagnetic Characteristics of Copper and Gold Ores

Effect of the microstructure and properties of graphite/copper composites fabricated by microwave sintering

Fabrication of Tungsten–copper Alloys by Microwave Hot Pressing Sintering

Influences of temperatures on tungsten copper alloy prepared by microwave sintering

Improving microstructural and mechanical properties of cold-sprayed copper matrix composite coatings by microwave heating treatment

Effect of Microwave-Activated Sintering on Microstructure and Properties of Graphite/Copper Composites

Enhancing microstructural properties of copper-based composite castings through microwave-assisted reinforcement with MWCNT

Effect of microwave melting on the microstructure and mechanical properties of Al-8.5Si-0.4Mg-0.7Cu alloy

Microwave absorbing mechanism of soft magnetic alloy Fe85Si2Al6Cr7

Experimental and numerical studies on the heating mechanism of millimeter multi-particle system under microwave irradiation

Molecular dynamics simulation of melting and sintering process of multi-scale copper nanoparticles

Reflow of Lead-Free Solder by Microwave Heating

Effect of heat treatment on the microwave electromagnetic properties of flaky Fe-Si-Al magnetic powders

Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation

Microwave Sintering of Metal Powder Materials (Review)

Microstructure and Properties of W Cu Composites with Low Copper Content at Different Sintering Temperatures

Microwave-Induced Polyol-Process Synthesis of Copper and Copper Oxide Nanocrystals with Controllable Morphology