Abstract:To further improve the thermal shock resistance and ablation resistance of SiBCN system ceramics targeted much harsh environment, both ultra-high temperature ceramic phases and carbon fibers are expected to be incorporated simultaneously as the reinforcements. However, tough problems like difficulty in densification as well as degradation of C fibers (Cf) due to interfacial reaction usually cannot be avoided. Thus, in this study, Zr as well as chopped Cf with BN coating were introduced into SiBCN ceramics by mechanical alloying and after hot-pressing sintering to prepare C/SiBCNZr composites. The structure and phase component development have been characterized in detail by XRD, SEM, TEM and XPS etc., and mechanical properties, fracture behavior and toughening mechanisms were also investigated. Zr-B and Zr-O bonds are detected besides Si-C, N-B and N-B-C bonds when pre-alloyed ZrB2 amorphous powder was incorporated into SiBCN system by further mechanical-alloying treatment. After hot-pressing, the ultra-high temperature phases of ZrB2 and ZrN were formed as expected besides the original matrix phases of BN(C) and SiC. Excellent mechanical properties can be obtained for SiBCNZr ceramic. The BN coating on carbon fibers successfully avoids the severe fiber degradation and makes it possible for moderating strong interface bonding, which ensuring the debonding, crack deflection, fiber pulling-out and bridging during the fracture. As a result, the C/SiBCNZr composites retain good mechanical properties and fractures in a pseudoplastic fracture manner, showing better potential applications in harsh environments. Optimization of the BN coating on Cf and Zr incorporation by pre-mechanical alloying can be a good route to achieve Cf/SiBCNZr composites with a better balance between thermal shock resistance, ablation resistance and mechanical properties.

Effect of Collinear Flaws on Flexural Strength and Fracture Behavior of ZrB2-SiC Ceramic

Accurate evaluation of critical flaw size in structural ceramics via femtosecond laser

Theoretical Analysis of Stress Intensity Factors and Interactions of Collinear Flaws with Unequal Lengths in Brittle Solids Under Uniaxial Tensile Conditions

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Modelling and Experimental Investigation of Pore-Like Flaw-Strength Response in Structural Ceramics

Crack coalescence mechanism of flaw pairs under biaxial loading conditions using additively printed models and photoelastic experiments

R-curve Behavior of Laminated ZrB2–SiC Ceramic with Strong Interfaces

Investigation on crack propagation of SiCf/SiC composite via PF-CZM method

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

Structure and fracture behavior of ion-beam-modified SiC-Al2O3-ZrO2 ceramic composites

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Fracture Mechanical and Ablation Behaviors of C/SiC-Cu3Si-Cu Interpenetrating Composites and Their Dependence on Metal Addition and Interface Thickness

Preoxidation and Crack-Healing Behavior of ZrB<sub>2</sub>-SiC Ceramic Composite

Residual Strength of a Low‐Strength Ceramic with a Precrack Induced by Thermal Shock

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Influence of nanosized SiC particle on the fracture toughness of ZrB2-based nanocomposite ceramic

DAMAGE RESISTANCE OF SiC/BN LAMINATED CERAMICS

Morphology and formation mechanism of cracks in Al2O3–ZrO2 eutectic ceramics fabricated via laser powder bed fusion

Effects of Zr and chopped C fiber on microstructure and mechanical properties of SiBCN ceramics

Experimental Investigation on the Surface and Subsurface Damages Characteristics and Formation Mechanisms in Ultra-Precision Grinding of SiC

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite