Abstract:The primary goal of this paper is to reveal the reaction behavior of SO2 in the sinter zone, combustion zone, drying-preheating zone, and over-wet zone during flue gas recirculation (FGR) technique. The results showed that SO2 retention in the sinter zone was associated with free-CaO in the form of CaSO3/CaSO4, and the SO2 adsorption reached a maximum under 900ºC. SO2 in the flue gas came almost from the combustion zone. One reaction behavior was the oxidation of sulfur in the sintering mix when the temperature was between 800 and 1000ºC; the other behavior was the decomposition of sulfite/sulfate when the temperature was over 1000ºC. However, the SO2 adsorption in the sintering bed mainly occurred in the drying-preheating zone, adsorbed by CaCO3, Ca(OH)2, and CaO. When the SO2 adsorption reaction in the drying-preheating zone reached equilibrium, the excess SO2 gas continued to migrate to the over-wet zone and was then absorbed by Ca(OH)2 and H2O. The emission rising point of SO2 moved forward in combustion zone, and the concentration of SO2 emissions significantly increased in the case of flue gas recirculation (FGR) technique. Implications: Aiming for the reuse of the sensible heat and a reduction in exhaust gas emission, the FGR technique is proposed in the iron ore sintering process. When using the FGR technique, SO2 emission in exhaust gas gets changed. In practice, the application of the FGR technique in a sinter plant should be cooperative with the flue gas desulfurization (FGD) technique. Thus, it is necessary to study the influence of the FGR technique on SO2 emissions because it will directly influence the demand and design of the FGD system.

Utilization of semi-dry sintering flue gas desulfurized ash for SO2 generation during sulfuric acid production using boiling furnace

Resource utilization of semi-dry flue gas desulfurization ash by thermal treatment on sintering machine

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Production of SO2 Gas: New and Efficient Utilization of Flue Gas Desulfurization Gypsum and Pyrite Resources

Advances on resource utilization of semi-dry desulfurization ash by thermal decomposition: a high-efficiency and low-temperature method for large-scale processing

An Efficient Method for Carbon Dioxide Sequestration Using Semidry Flue Gas Desulfurization Ash

Utilization of Desulfurization Gypsum to Producing SO2 and Cao in Multi-Stage Fluidized Bed

Experimental Study on SO2 Recovery Using a Sodium–zinc Sorbent Based Flue Gas Desulfurization Technology

Reaction behavior of SO2 in the sintering process with flue gas recirculation

INTERACTION BETWEEN SO2 FROM FLUE GAS AND SORBENT PARTICLES IN DRY FGD PROCESSES

Removal of SO2 from flue gas using blast furnace dust as an adsorbent

Study on a New Wet Flue Gas Desulfurization Method Based on the Bunsen Reaction of Sulfur-Iodine Thermochemical Cycle

Study on a Novel Semidry Flue Gas Desulfurization with Multifluid Alkaline Spray Generator

Simulation and Experimental Study on the Desulfurization for Smelter Off-Gas Using a Recycling Ca-based Desulfurizer

Low-temperature oxidation behavior and mechanism of semi-dry desulfurization ash from iron ore sintering flue gas

Fixing sulfur dioxide by feeding calcine oxide into the rotary volatilization kiln in zinc smelting plant

Study on thermal regeneration of saturated activated coke coupled with SO2 carbothermal reduction to produce elemental sulfur

Trash to Treasure: Use Flue Gas SO2 to Produce H2 Via a Photoelectrochemical Process

Selective sulfur removal from semi-dry flue gas desulfurization coal fly ash for concrete and carbon dioxide capture applications

Research on SO2 Generation in One-dimensional Furnaces and on Laws That Govern Desulfuration by Limestone Injection

Integrated carbon dioxide/sludge gasification using waste heat from hot slags: syngas production and sulfur dioxide fixation.