Abstract:The resistive switching memory effects in metal-insulator-metal devices with aluminium (Al) as top electrode (TE) and bottom electrode (BE). A solution processed active layer consisting of zinc oxide (ZnO) nanoparticles embedded in an insulating polyvinyl alcohol (PVA) matrix and polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has been studied by using flexible polyethylene terephthalate (PET) substrates. The current-voltage (I-V) measurements of hybrid Al/ZnO-PVA/PEDOT:PSS/Al/flexible PET substrate device exhibited a non-volatile bistable resistive switching behaviour, which is attributed to the trapping, storage and transport of charges in the electronic states of the ZnO nanoparticles. The performance of hybrid device is significantly enhanced over control Al/PEDOT:PSS/Al and Al/ZnO-PVA/Al devices due the presence of PEDOT:PSS polymer. This PEDOT:PSS improves the performance of oxygen ions (holes) migration toward BE and protect back oxygen vacancies (electrons) migrate toward BE from ZnO-PVA composites which may reduces the leakage current, as a result, increased the 'ON state/OFF state' current ratio of 7.9 × 103 times. The fabricated hybrid device showed high ON/OFF switching current ratio larger than five orders of magnitude with low operating voltages. It is observed that, the existence of two conducting states, namely, low conductivity state (OFF state) and high conductivity state (ON state), exhibiting bistable behaviour. The state of the device was maintained even after removal of the applied bias, indicating the non-volatile memory. The observed current-time response showed good memory retention behaviour of the fabricated devices. The excellent stability and retention performances of hybrid device verify the reliability of this device and demonstrate their potential for application in non-volatile bistable memory device. The carrier transport mechanism of the bistable behaviour for the fabricated non-volatile organic bistable devices structures is described on the basis of the I-V experimental results by analyzing the effect of space charge and electronic structure. Interestingly, the device performance was not degraded and remains identical even after bending the device from 60-120° angles, which indicates high potential for flexible non-volatile bistable memory device applications. This demonstration provides a class of memory devices with the potential for future flexible electronics applications.

A Donor-Acceptor Structured Conjugated Copolymer for Flexible Memory Device

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Flexible Metal‐Free Memory Electronic Made of Π‐conjugation‐interrupted Hyperbranched Polymer Switch and Reduced Graphene Oxide Electrodes

Bistable Electrical Switching And Write-Once Read-Many-Times Memory Effect In A Donor-Acceptor Containing Polyfluorene Derivative And Its Carbon Nanotube Composites

Solution-processed flexible nonvolatile organic field-effect transistor memory using polymer electret

Improved Resistive Switching Performance through Donor-Acceptor Structure Construction in Memristors Based on Covalent Organic Framework Films

An Electrogenerated Chemical-Oxidation-Driving Nonvolatile Plastic Memory Device with the Conjugated Polymer/Carbon Nanotube Blend

Conjugated Polymer Nanoparticles as Nano Floating Gate Electrets for High Performance Nonvolatile Organic Transistor Memory Devices

Bodipy-Based Conjugated Polymer Covalently Grafted Reduced Graphene Oxide for Flexible Nonvolatile Memory Devices

Non‐Volatile Polymer Memory Device Based on a Novel Copolymer of N‐Vinylcarbazole and Eu‐Complexed Vinylbenzoate

High-performance flexible pentacene transistor memory with PTCDI-C<sub>13</sub> as N-type buffer layer

Flexible Single-Component-Polymer Resistive Memory for Ultrafast and Highly Compatible Nonvolatile Memory Applications

High‐Performance Pentacene‐Based Field‐Effect Transistor Memory Using the Electrets of Polymer Blends

N, S-codoped Cross-Linked Polymers for Low Switch Voltage and High Thermal Stable Nonvolatile Memory

Fluorene Based Donor-Acceptor Polymer Electrets For Nonvolatile Organic Transistor Memory Device Applications

Low-voltage operating flexible ferroelectric organic field-effect transistor nonvolatile memory with a vertical phase separation P(VDF-TrFE-CTFE)/PS dielectric

Electrical Bistability and WORM Memory Effects in Donor–Acceptor Polymers Based on Poly(N‐vinylcarbazole)

Flexible Robust and High-Density FeRAM from Array of Organic Ferroelectric Nano-Lamellae by Self-Assembly.

Flexible Polymer Device Based on Parylene-C with Memory and Temperature Sensing Functionalities

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Flexible resistive switching bistable memory devices using ZnO nanoparticles embedded in polyvinyl alcohol (PVA) matrix and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)