Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Investigation on the Crystallographic Orientation Relationships and Interface Atomic Structures in an In-Situ Ti2AlN/TiAl Composite

Preparation and Microstructural Analysis of Ti 2 AlC/TiAl(Nb) Composite

Interface and precipitate investigation of a TiB2 particle reinforced NiAl in-situ composite

High Temperature Micromechanical Behavior of Ti2AlN Particle Reinforced TiAl Based Composites Investigated by In-Situ High-Energy X-ray Diffraction

Interface Structural Characteristics of In-Situ TiC / 7075 Al Composites

Atomic Diffusion Mechanism and Interface Nanomechanics in the Al/Ti Composite Structures

In-situ synthesis, microstructure and properties of Ti<sub>2</sub>AlN/TiB<sub>2</sub> composite

Tensile Properties and Fracture Behavior of In-Situ Synthesized Ti 2 AlN/Ti48Al2Cr2Nb Composites at Room and Elevated Temperatures

Formation and Characteristics of Nanocrystalline Composites Γ–tial + Ti2AlN by Mechanical Alloying and Subsequent Annealing Treatment

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

Formation of Laminar Ti-Al-N Solid Solution and Interfacial Atomistic Structure of TiB2-AlN-B4C Composite

Interface Structure of Al3Ti, Α-Al2o3 and TiB2/Al Composites Fabricated by Exothermic Dispersion Reaction Method

Novel Orientation Relationships and Mechanical Properties of in Situ Synthesized Ti5Si3-reinforced TiAl Composite Via Electron Beam-Directed Energy Deposition

In-Situ Synthesis, Microstructure and Properties of Ti2aln/Tib2 Composite

Crystallographic orientation relationship between Al2O3 and Al in in situ Al2O3 reinforced Al-4Mg matrix composites

Interface structure of TiAlN/Ti multi-composite compound coating

Reaction synthesis, microstructure, and mechanical properties of in-situ TiAl-based multiphase composites

Fabrication and Mechanical Properties of in Situ Synthesized Ti 2 AlN/TiAl Composite

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Microstructure and Mechanical Properties of in Situ Al2O3 Particles Reinforced Two-Phase TiAl-based Composites

In Situ Ti2AlN Reinforced TiAl-based Composite with a Novel Network Structure: Microstructure and Flexural Property at Elevated Temperatures