Abstract:Freshness and quality of fruits and vegetables as well as product saleable weight depend on heat and moisture transfer rate during air-cooling in the cool storages. The main objective of this study was to evaluate and develop a validated CFD model for predicting the temperature and velocity fields in a cold storage. In this study the air temperature, velocity, and non-uniform airflow in cold storage have been studied experimentally and numerically. Experimental and numerical models were employed to investigate cold storage's airflow field, flow pattern, and temperature field. The temperature and the velocity fields were measured in the cold storage filled with two potato pallets by using a hot wire anemometer and thermocouple with a programmable data logger computer. The experimental data was recorded at 60 points of temperature, and 27 points of velocity from three levels; high, middle, and bottom. Numerically the SB (Solid Block) technique was used to assess four turbulence models (Standard k-ε, Realizable k-ε, Standard k-ω, and SST k-ω) to compare with the experimental results for validation. The results of the validation were agreed with the experimental. The comparisons between the numerical results and experimental results revealed that the Shear Stress Transport (SST k-ω) model shows the best performance with the smallest absolute errors for temperature and velocity respectively. As well as the results revealed that the bottom and the top of the room was subjected to fresher and cooler air with relatively higher velocity. According to the study validation and finding, using the SST k-ω model is the best model for investigation in a cold storage, and for the improvement and evaluation of more complex cold storage, to achieve the balance distributions of air velocity, air temperature, and other heat transfer phenomena.

Numerical investigation on the buoyancy-driven infiltration airflow through the opening of the cold store

Study on Infiltration Through Doorway of Cold Store based on Unsteady RANS Model

An Experimental Investigation Of The Single Sided Infiltration Through Doorways Of The Cold Store

An Analytical Model for Predicting Infiltration Flow Rate Through Doorways of Cold Store

Measuring the transient airflow rates of the infiltration through the doorway of the cold store by using a local air velocity linear fitting method

Numerical simulation of internal flow in forward-curved centrifugal fan

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Development of an unsteady analytical model for predicting infiltration flow rate through the doorway of refrigerated rooms

A Local Air Velocity Measurement Method for Estimating Infiltration Heat Load through Doorway of the Cold Store

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Numerical simulation of closed wet cooling towers for chilled ceiling systems

Numerical Simulation of Influencing Factors to the Thermal Insulation Performance of Cold Chain Shipping Containers and Analysis of Internal Flow Field

Numerical simulation of cooling effect of corridor in a hydroelectric station dam

Three-dimensional numerical simulation on thermal performance in counter flow natural draft cooling tower

Field Measurement and Numerical Simulation of Air Infiltration from Entrances in an Airport in Winter

Evaluation, Monitoring, and Improving the Airflow and Heat Transfer in a Cold Storage of Foodstuffs, CFD Simulation and Experimental Investigation

An open-source and experimentally guided CFD strategy for predicting air distribution in data centers with air-cooling

Numerical Simulation Of Heat And Mass Transfer In Air-Water Direct Contact Using Computational Fluid Dynamics

Numerical study on air flow around an opening with large eddy simulation

Three-Dimensional Numerical Study on Thermal Performance in A Natural Draft Wet Cooling Tower

Numerical Study of Natural Draft Wet Cooling Tower