Abstract:The air infiltration rate of buildings strongly influences indoor environment and energy consumption.In this study,several traditional methods for determining the air infiltration rate were compared,and their accuracy in different scenarios was examined.Additionally,a method combining computational flow dynamics(CFD)with the Swami and Chandra(S-C)model was developed to predict the influence of the surrounding environment on the air infiltration rate.Two buildings in Dalian,China,were selected:one with a simple surrounding environment and the other with a complex surrounding environment;their air infiltration rates were measured.The test results were used to validate the accuracy of the air infiltration rate solution models in different urban environments.For the building with a simple environment,the difference between the simulation and experimental results was 0.86%-22.52%.For the building with a complex environment,this difference ranged from 17.42%to 159.28%.We found that most traditional models provide accurate results for buildings with simple surrounding and that the simulation results widely vary for buildings with complex surrounding.The results of the method of combining CFD with the S-C model were more accurate,and the relative error between the simulation and test results was 10.61%.The results indicate that the environment around the building should be fully considered when calculating the air infiltration rate.The results of this study can guide the application of methods of determining air infiltration rate.

Development of an unsteady analytical model for predicting infiltration flow rate through the doorway of refrigerated rooms

An Analytical Model for Predicting Infiltration Flow Rate Through Doorways of Cold Store

Study on Infiltration Through Doorway of Cold Store based on Unsteady RANS Model

Improved Model for Contaminant Intrusion Induced by Negative Pressure Events in Water Distribution Systems

Measuring the transient airflow rates of the infiltration through the doorway of the cold store by using a local air velocity linear fitting method

Experimental Observation on Factors Affecting Intrusion Volumes During Low or Negative Pressure Events

An Experimental Investigation Of The Single Sided Infiltration Through Doorways Of The Cold Store

A Local Air Velocity Measurement Method for Estimating Infiltration Heat Load through Doorway of the Cold Store

An Approximate Model on Three-Dimensional Groundwater Infiltration in Sewer Systems.

Numerical investigation on the buoyancy-driven infiltration airflow through the opening of the cold store

An algorithm to predict the transient moisture distribution for wall condensation under a steady flow field

The Characteristics Of Infiltration Air In Large Space Buildings

Comparison of Models to Predict Air Infiltration Rate of Buildings with Different Surrounding Environments

Field Measurement and Numerical Simulation of Air Infiltration from Entrances in an Airport in Winter

Validation of Model Predictions of Pore-Scale Fluid Distributions During Two-Phase Flow

Theoretical Model of Buoyancy-Driven Air Infiltration During Heating/cooling Seasons in Large Space Buildings

Numerical simulation of air distribution in chair ventilated rooms by simplified methodology

Three-dimensional non-isothermal numerical model for predicting semi-volatile organic compound transport process in a room

Development of subcooled wall boiling model considering bubble sliding in narrow rectangular channel

A simplified system for indoor airflow simulation

A Prediction Method For Interior Temperature Of Grain Storage Via Dynamics Models: A Simulation Study