Abstract:The microstructures and corrosion behaviors of as-cast, T4-treated, and T6-treated Mg-6Gd-3Y-0.5Zr alloys were systematically investigated by SEM, TEM, immersion test, and electrochemical corrosion test. The results show that the microstructure of the as-cast alloy is composed of α-Mg and Mg 24 (Gd, Y) 5 eutectic phase, and in T4-treated alloy, Mg 24 (Gd, Y) 5 phase dissolves into the α-Mg matrix, leading to an increase in the (Y, Gd)H 2 phase. After T6 treatment, nanoscale Mg 24 (Gd, Y) 5 phase dispersedly precipitates from the α-Mg matrix, and exhibits a specific orientation relationship with the . The corrosion resistance of the Mg-6Gd-3Y-0.5Zr alloys can be ranked in the following order: T6-treated alloy exhibits the highest corrosion resistance, followed by the T4-treated alloy, and finally, the as-cast alloy. The corrosion products of the alloys are all composed of MgO, Mg(OH) 2 , Gd 2 O 3 , Y 2 O 3 , and MgCl 2 . The corrosion behavior of Mg-6Gd-3Y-0.5Zr alloy is closely related to the precipitated phase. By establishing the relationship between corrosion rate, hydrogen evolution rate, and corrosion potential, it is further demonstrated that during the micro galvanic corrosion process, the coarse Mg 24 (Gd, Y) 5 phase in the as-cast alloy undergoes extensive dissolution, and (Y, Gd)H 2 phase promotes the dissolution of the α-Mg matrix in the T4-treated alloy, intensifying the hydrogen evolution reaction. The T6-treated alloy, with dispersive precipitation of nanoscale Mg 24 (Gd, Y) 5 phase, exhibits better corrosion resistance performance.

Corrosion Behavior and Mechanism of Mg-Y-Zn-Zr Alloys with Various Y/Zn Mole Ratios

Corrosion Behavior of Mg-Zn-Y-Zr Alloys in Nacl Solution

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Effect of Zn Content and Homogenization Treatment on Mechanical Properties and Corrosion Behavior of Mg-9Y-xZn Alloys

Study on the Microstructure and Corrosion Behavior of Mg–(4 − X)gd–xy–2zn (x = 0, 2, 4 Wt%) Alloy

Microstructure and corrosion behavior of as-homogenized and as-extruded Mg−xLi−3Al−2Zn−0.5Y alloys (x=4, 8, 12)

Microstructure and Corrosion of Cast Magnesium Alloy ZK60 in NaCl Solution

Effect of the Zn/Mg Ratio on Microstructures, Mechanical Properties and Corrosion Performances of Al-Zn-Mg Alloys

Comparison of the Corrosion Behaviors of Mg–Gd–Y–Zn–Zr Alloys Fabricated by Different Preparation Methods

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effect of Y Contents on the Microstructure, Mechanical Properties, and Corrosion Behavior of Biomedical Mg‐0.5Zn Alloy

Effect of Heat Treatment on Corrosion and Mechanical Properties of Mg-10Y-1.5Zn-0.5Zr Alloy

Effect of volume fraction of 18R-LPSO phase on corrosion resistance of Mg−Zn−Y alloys

Microstructure characterization and corrosion behavior of Mg–Y–Zn alloys with different long period stacking ordered structures

Effect of Volume Fraction of LPSO Phases on Corrosion and Mechanical Properties of Mg-Zn-Y Alloys

Effect of heat treatment on corrosion behaviors of Mg-6Gd-3Y-0.5Zr alloy

Investigating the corrosion behavior of as‐cast Mg‐Zn‐Ca alloys with the same Zn/Ca atomic ratio by in situ observation

Effect of Microstructure on the Corrosion Behavior of as-cast and Extruded Mg–Sn–Y Alloys

Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn-Zr Alloys with Different Compositions

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions