Abstract:Ti(C0.7,N0.3)-Mo2C–Ni cermets are fabricated by powder metallurgy methods. We systematically investigate the microstructure, fracture morphology, crack propagation mechanism, and interface characteristics of Ti(C, N)-based cermets with different Ni binder contents.The increased dissolution of carbides and carbonitrides leads to a large amount of (Mo,Ti)(C,N) solid solution precipitates, which then spontaneously nucleate, resulting in a significant increase in the content of white core-gray rim grains in the cermets with a high binder content. The increased Ni binder largely improves the flexural strength and fracture toughness of the Ti(C,N)-based cermets because of the ductile dispersion toughening. The rim-core interfaces have a superior atomic coherent relationship in all Ti(C,N)-based cermets owing to the small lattice mismatch. The lattice mismatch of the interface between the rim phase and metal binder is remarkably decreased with the increase in the binder content to construct an atomic coherent relationship. Thus, the increased Ni binder promotes atomic ordering at the interface between the ceramic grains and binder and strengthens the grain boundary. The characteristic (111) peak of nickel shifts to a larger angle due to the reduction in the Ni-based solid solution lattice distortion. Therefore, the effect of solid solution strengthening is diminished with the increase in binder content, which results in a decreased binder strength. In the Ti(C,N)-based cermets with low metal binder contents, the fracture of the grain boundary between the ceramic grains and binder is the predominant failure mechanism. The intergranular crack accompanied by crack branching is the main characteristic of crack propagation. A hybrid fracture mode of intergranular and transgranular cracks is observed in the Ti(C,N)-based cermets with a moderate binder content. As the binder content further increases, the plastic yield deformation and subsequent tearing of the metal binder are the main fracture characteristics because of grain boundary strengthening and decreased strength of the binder.

Erosion-corrosion Behavior of Ti(C,N)-based Cermets Containing Different Secondary Carbides

Correlation between microstructure and mechanical properties of Ti(C,N)-xWC-Ni cermets prepared by mechanical activation and subsequent in situ carbothermal reduction

Carburization And Wear Behavior Of Self-Lubricating Ti(C,N)-Based Cermets With Various Secondary Carbides

Research On Wear Behavior Of Atc Cermet Material

Effect of pre-solid solution treatment of secondary carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets

Fracture Behaviors of Ti(C, N)-based Cermets with Different Contents of Metal Binder

Effect of impact angle on wear behavior of Mo2NiB2–Ni cermets with different Ni content

Influence of Mo addition on microstructure and mechanical properties of Ti(C,N)-based cermets fabricated by in-situ carbothermal reduction of TiO2

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Strengthening and toughening of Ti(C,N)-based cermets: (Ti,W)C additive design and the mechanism

Effect of tungsten carbide content on the tribological behavior of TiB2–TiC-based cermets

Wear Resistance of Tic Ceramic Particulate-Reinforced Metal Matrix Cermets

Effect of Ni Content on the Microstructure, Mechanical Properties and Erosive Wear of Mo2NiB2–Ni Cermets

Microstructure and Properties of Ti(C,N)-Based Cermets with AlxCoCrFeNiTi Binder

Diffusion Behavior of Secondary Carbides and Subsequent Influence on Microstructure of NbC-Ni-Based Cermets

Effect of Tic/Tin Powder Size on Microstructure and Properties of Ti(C, N)-Based Cermets

Effect of WC-Co Granules on Mechanical Properties and Microstructure of Ti(C,N)-based Cermets

Microstructure and Mechanical Properties of TiC Reinforced NbC-Ni4VC4Mo2C Cermets

Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction

Achieving hardness‐strength‐toughness synergy in (Ti, W, Mo, Cr)(C, N)‐based cermets

Erosion Resistance of Cermet Coatings Deposited by Supersonic Atmospheric Plasma Spraying