Abstract:The use of split-type air-conditioners in new apartment buildings becomes popular in Hong Kong. One requirement for their effective use is satisfactory heat rejection at the outdoor condensing units. When a group of outdoor units is working together, the heat released by one condenser may affect the heat rejection rates at the others, and hence may deteriorate their performance. At the layout-design stage, an HVAC engineer often finds it difficult to predict such a thermal effect, say, when over a hundred of these out d or units are to be placed inside one single re-entrant of a high-rise building. This paper presents a simulation approach to tackle the problem. The computation technique is demonstrated by its application to evaluate the effect of proper spacing between adjacent condensing units. INTRODUCTION Most residents of Hong Kong live in high-rise apartment buildings. New apartment buildings in the city are typically comprised of a number of residence towers standing on a common podium garden (see Figure 1). Covered car-park, shopping mall, and other supporting facilities are often found below the podium level. The floor plan of each residence tower is based on a cruciform design with its four wings radiating out from the building core. At the building core are the communal space like lift shafts, lift lobbies, corridors, meter rooms, and public stairs etc. Typically there are eight flats on a single floor, two at each wing. A narrow but deep re-entrant exists at each wing between the neighbouring flats [1]. These re-entrants provide ventilation and natural light to the kitchens and the toilets of the apartments. In recent years, split-type air-conditioners are widely adopted as a standard provision in new apartments to serve the living/dining rooms and the bedrooms. The distinct advantages of split-type units lie in the quiet operation and the flexibility in multi-room services [2]. By placing the outdoor condensing units inside the re-entrants, the provision can retain a clean and tidy external look of the building – not being spoiled by the windowmounted air-conditioners as it was used to be in the previous design. However, it is known that for split-type units, effective cooling performance of the indoor airconditioning units requires effective heat dissipation at the outdoor condensing units. For a 30-storey apartment building, it is not surprising to have over a hundred of these out door units being placed inside a single re-entrant. Heat energy released altogether brings about a natural upward flow of air. Depending on the actual layout of the outdoor units, air temperature at the upper part of the re-entrant may reach an unacceptably high level. This could in turn downgrade the air-conditioner performance because of the unsatisfactory condenser-cooling condition, or even cause accidental trip of the air-conditioners. ENERGY PERFORMNANCE OF SPLITTYPE AIR-CONDITIONERS Performance of a split-type unit can be described by its coefficient of performance (COP). The value of COP varies with the instantaneous working conditions, for instance, the room air condition and the condenser-cooling condition. An airconditioner performs better at higher room temperature (T r), and lower condenser on-coil temperature (T o). The COP of a split-type unit can be related to T o by the following linear regression equations at different room temperature conditions:

Experimental Study on the Performance of Air-Cooled Condensing Unit in Groove

Anti-insulation Behavior for Exterior Wall External Insulation on Residential Buildings in Hot Summer and Cold Winter Zone

Performance Study of Axial Flow Fan in Out-door Units of Air Conditioner

Effect of Refrigerant Circuit Arrangement of Outdoor Heat Exchanger on Performance of Heat Pump Air Conditioner

Performance Evaluation of Fin-and-tube Heat Exchangers in an Outdoor Unit Considering Air Flow Mal-Distribution

Experimental Study on the Effect of Condensate Water on the Performance of Split Air Conditioning System

Experimental Study Of Cooling Performance Of Gravity Air-Conditioning

Performance Analysis Of Room Air Conditioners Via Questionnaire And Integrated Field Test

Experimental and Numerical Study of Electronic Module-Cooling Heat Sinks Used in a Variable Frequency Air-Conditioner Outdoor Unit

Development of gas pressurized composite air-conditioning unit and annual operation energy efficiency analysis

An Experimental Investigation on Air-Side Performances of Finned Tube Heat Exchangers for Indirect Air-Cooling Tower

Influence of Surrounding Structures Upon the Aerodynamic and Acoustic Performance of the Outdoor Unit of a Split Air-Conditioner

Effect of installation height of indoor unit on field heating performance of room air conditioner

Studying thermal performance of split-type airconditioners at building re-entrant via computer simulation

Experimental and Numerical Study of Cross-flow Fan in Air-conditioner Indoor Unit

Experimental performance analysis of hybrid air conditioner in cooling season

Improving Performance of Air Conditioning System by Using Variable-Circuit Heat Exchanger: Based on the Chinese APF Standard

Effect of building re-entrant shape on performance of air-cooled condensing units

Effect on Thermal Comfort and Energy Consumption of Different Installation Height and Supply Air Angle of Room Air Conditioner by Simulation

Modelling and Performance Evaluation of an Air Handling Unit for an Air Treatment System with Regulated Outdoor-Air Fraction

Experimental Investigation on the Performances of the Fan-Coil Unit:a case on ECR400