Abstract:The electricity market from renewable energies is strongly driven by the pursuit of high energy conversion efficiency, which at present represents the most effective pathway to achieve substantial cost reductions. Silicon (Si) have been dominating the photovoltaic industry for decades, while the conversion efficiencies of Si single-junction solar cells are practically limited to around 27%, and intrinsically constrained to 29.4%. To tackle this long-term bottleneck, it is necessary to develop novel technologies and transfer them into industrial production. This paper commences with a review concentrating on two critical concepts enabling high-efficiency Si-based solar cells: passivating contacts and tandem technologies. Since the gradual evolution from full area Al back surface field cells to passivated emitter and rear contact cells, passivating contacts are considered as an essential concept to circumvent the recombination losses caused by the contacts. The theoretical background of the three prominent technologies for passivating contacts and their application prospects to solar cells are described in detail. The fundamental limit of single junction Si solar cells is attainable with the introduction of passivating contacts. To obtain conversion efficiencies greater than 30%, upgrading Si with a high-bandgap tandem partner is a promising approach to improve the utilization of the solar spectrum, having the potential to produce efficiency surpassing the single junction Shockley–Queisser limit. Si is proven to be an ideal bottom cells material in tandem architectures due to its appropriate bandgap for the lower sub-cell and the advantage of compatibility with existing production lines, the technologies for crystalline Si as bottom-cell are already quite mature with a gigawatt scale. The two widely considered ideal options for the top-cell, i.e., III/V and perovskites, are summarized, respectively. Building on these two concepts, a clear technology route is provided to maximize energy conversion efficiency by integration of passivating contacts into Si based tandem solar cells. According to this discussion, guidelines for further developments of Si photovoltaics emerge clearly, proving that Si will continue to maintain its irreplaceable position in photovoltaics in the long term.

Development of Back-Junction Back-Contact Silicon Solar Cells Based on Industrial Processes

Silicon heterojunction back contact solar cells by laser patterning

Interdigitated Back Contact Technology as Final Evolution for Industrial Crystalline Single-Junction Silicon Solar Cell

Hard mask processing of 20% efficiency back-contacted silicon solar cells with dopant-free heterojunctions

Realization and Simulation of Interdigitated Back Contact Silicon Solar Cells with Dopant-Free Asymmetric Hetero-Contacts

Design, realization and loss analysis of efficient low-cost large-area bifacial interdigitated-back-contact solar cells with front floating emitter

A Simulation Study of the Micro-Grooved Electrode Structure for Back-Contact Back-Junction Silicon Solar Cell

The Development of Carbon/Silicon Heterojunction Solar Cells through Interface Passivation

Beyond the crystalline silicon solar cell mass-production—high energy-conversion-efficiency N-type back-junction front-contact and back-junction back-contact mono-crystalline silicon solar cells

Thin Al2O3 passivated boron emitter of n-type bifacial c-Si solar cells with industrial process

Bifacial silicon heterojunction solar cells using transparent‐conductive‐oxide‐ and dopant‐free electron‐selective contacts

Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells

Passivating contacts for high-efficiency silicon-based solar cells: From single-junction to tandem architecture

Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning

Numerical and experimental exploration towards a 26% efficiency rear-junction n-type silicon solar cell with front local-area and rear full-area polysilicon passivated contacts

Industrial Applications Of A Novel Technology For Commercial Multicrystalline Silicon Solar Cells

Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers

Further Efficiency Improvements of the N-Type MWT Si Solar Cells Using Industrial Processes

Quasi‐Omnidirectional Ultrathin Silicon Solar Cells Realized by Industrially Compatible Processes

Realization of Improved Efficiency on Nanostructured Multicrystalline Silicon Solar Cells for Mass Production

n-Type polysilicon passivating contact for industrial bifacial n-type solar cells