Abstract:The strategy for disposal of high-level radioactive waste in china is to enclose the spent nuclear fuel in sealed metal canisters which are embedded in bentonite clay hundreds meters deep in the bed-rock.The choice of container material depends largely on the redox conditions and the aqueous environment of the repository.One of the choices for the fabrication of waste canisters is copper, for it is thermodynamically stable under the saline,anoxic conditions over the large majority of the container lifetime.For this advantage,some other countries(Canada,Sweden) have selected copper as the material of nuclear waste container.However,in the early aerobic phase of the geological disposal the corrosion of copper could take place,and the corrosion behavior of copper would be influenced by the complex chemical conditions of groundwater markedly.Regularly,in atmosphere environment the semiconductor passive film which is constructed by Cu_2O would generate on the surface of copper.On the one hand,the Cu_2O film could protect copper from corrosion.On the other hand,the formation of Cu_2O film is necessary to maintain the propagation of crack during the stress corrosion cracking. Therefore,the study of the effect of water chemistry conditions on the stability of Cu_2O passive film makes great sense for the general corrosion and stress corrosion cracking of copper.For copper and copper alloy,Cl~- is a highly aggressive ion.Lots of cases of failure and corrosion behavior of copper and copper alloy in Cl~- environment have been studied.The immersion of Cl~- would affect the semiconductor properties of Cu_2O,therefore,we focused on the effect of pH and Cl~- concentration on the corrosion behavior and semiconductor properties of Cu_2O in this paper.The polarization behavior of Cu electrodes and the stability of passive film Cu_2O in boric acid buffer solution have been investigated respectively by potentiodynamic polarization,electrochemical impedance spectroscopy (EIS) and semiconductor capacitance method(Mott-Schottky method).The results showed that the destruction and dissolution of the passive film Cu_2O happened in the conditions of low pH and high Cl~- concentration.The semiconductor character of passive film changed from p-type into n-type in the solution with high Cl~- concentration,so that Cl~- is more likely to enter the passive film and take complex reaction with Cu~+,which could destroy the passive film and accelerate corrosion.The passive film Cu_2O is more steady in the condition of high pH and low Cl~- concentration.

Effect of Sulfide Concentration on Copper Corrosion in Anoxic Chloride-Containing Solutions

Effect of Sulfate Ions on Anodic Polarization Behavior of Nanocrystalline Copper Bulk

Kinetic Analysis on Anodic Polarization Behavior of Nanocrystalline Copper in Na2SO4 Solution

Preparation and electrochemical corrosion behaviour of 3D large-sized nanocrystalline copper bulk in solutions with chloride ions

The Influences of Traces of Oxygen and Sulfide on the Corrosion of Copper in Concentrated Chloride Solutions

Influence of sulfide concentration on the corrosion behavior of pure copper in synthetic seawater

Influence of sulfide on the passivation behavior and surface chemistry of 2507 super duplex stainless steel in acidified artificial seawater

Accelerated microbiologically influenced corrosion of copper by sulfate‐reducing bacterium Desulfovibrio desulfovibrio

Corrosion Electrochemical Kinetic Study of Copper in Acidic Solution Using Scanning Electrochemical Microscopy

Influence of SO4 2- and Cl- the corrosion behavior of copper tube in air-conditioning system

EFFCTS OF pH AND Cl− CONCENTRATION ON THE CORROSION BEHAVIOR OF COPPER IN BORIC ACID BUFFER SOLUTION

Effect of Supporting Anion for Copper Corrosion in Gas Diffusion Microenvironments

Effect of sulphide in water on corrosion of copper alloys

The Effect of Chloride Ion on Corrosion Behavior of Ni-P Alloy Coating Using SECM Experiment and COMSOL Simulation

Study of the effect of chalcopyrite and pyrite minerals on the oxidation of copper sulfide concentrate

Systematic Insight into Chloride Concentration, Applied Potential and Time Effect on the Passive Film of Cu-Zn-Ni Ternary Alloy in Alkaline Solution

Effects of Fe(III) and Cu(I) on Electrodeposition and Microstructure Characterization for Acid Plating Bath

Electrochemical characteristic analysis for surface passivation layer of galena and chalcopyrite in acid corrosion

New Insights into the Oxidation Mechanism of Pyrite in Copper-Containing Sulfuric Acid: An Electrochemical, AFM, Raman Spectroscopy and XPS Investigation

Insights into Sulfur and Hydrogen Sulfide Induced Corrosion of Sintered Nanocopper Paste: A Combined Experimental and Ab Initio Study

Synthesis of Copper Sulfides by Anion Substitution and their Resistive Switching Properties in the Presence of Cuprou's