Abstract:The development of automotive lighting systems with high illumination quality and high reliability is essential for driving safe and comfort. LEDs have many superiorities over the traditional light sources, such as high reliability, good color quality, long lifetime, energy and space saving, environment friendly and so on, when they are operated under an effective health management (such as thermal, electrical and optical managements). In the recent decades, LEDs have been widely applied in automotive as dashboard lightings, interior and exterior signal lightings. However, when they are introduced as a light source into automotive headlight system, LEDs must be required to have both high luminous flux (>1000 lm for low beam) and high thermal stability, because automotive headlamps are always installed near engine and their typical ambient temperature is about 80 degrees C. The luminous flux model has often been used to describe the light output behavior of a LED as function of the driven current (I-r) and junction temperature (T-j), which can be used to represent LED's state of performance. This paper introduces the luminous flux model for a high power LED automotive headlamp module. Firstly, the junction temperatures of LED modules are estimated and verified under the conditions of different driven currents and case temperatures (T-c). The characterization data with the measured luminous flux (Phi), the estimated T-j and I-f are then used to estimate the coefficients in the luminous flux models with the Goodness-of-Fit method. The result shows that the modified luminous flux model can describe the actual nonlinearity of LED's luminous flux when it is operated at the condition of high temperature and high driven current.

Theoretical Modeling of Luminous Efficacy for High-Power White Light-Emitting Diodes

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Analysis and Modeling of Optical and Thermal Properties of Phosphor Converted White Light Emitting Diode

An Approach to Calculate the Theoretical Luminous Efficacy of White LEDs at A Certain CCT

Luminous Flux Modeling For High Power Led Automotive Headlamp Module

Thermal Analysis of Light-Emitting Diodes Based on Photo-Electro-thermal Relationship

A simplified thermal resistance network model for high power LED street lamp

Study on the new models of high power LED current-voltage characteristics

Dynamic compact thermal model of high power light emitting diode

A Simplified Photo-Electro Model for LED Lighting

A Novel LED Photo-Electro-Thermal Model with Simplified Variables

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

Thermal Resistance Measurement of Light-Emitting Diodes Based on Photo-Electro-thermal Theory

Temperature Estimation of High-Power Light Emitting Diode Street Lamp by a Multi-Chip Analytical Solution

Analysis of luminous efficiency of power LED

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Modeling and Parametric Study of Light Scattering, Absorption and Emission of Phosphor in a White Light-Emitting Diode

Optimization of White Light-Emitting Diode Properties for Efficient Illumination Module Application

An Alternative Lifetime Model for White Light Emitting Diodes under Thermal–Electrical Stresses

Junction temperature and luminous flux prediction for white LED array based on electrical-photo-thermal modeling

Luminous Efficacy of White LED in the Mesopic Vision State