Abstract:The development of light-emitting diode (LED) technology has resulted in widespread solid state lighting (SSL) use in consumer and industrial applications. Previous researchers have shown that LEDs from the same manufacturer and operating under same use-condition may have significantly different degradation behavior. Applications of LEDs to safety critical and harsh environment applications necessitate the characterization of failure mechanisms and modes. This paper focuses on a prognostic health management (PHM) method based on the measurement of forward voltage and forward current of bare LED under harsh environment. In this paper, experiments have been done on single LEDs subjected to combined temperature–humidity environment of 85 °C, 85% relative humidity. Pulse width modulation (PWM) control method has been employed to drive the bare LED in order to reduce the heat effect caused by forward current and high frequency (300 Hz). A data acquisition system has been used to measure the peak forward voltage and forward current. Test to failure (luminous flux drops to 70%) data has been measured to study the effects of high temperature and humid environment loadings on the bare LEDs. A solid state cooling method with a Peltier cooler has been used to control the temperature of the LED in the integrating sphere when taking the measurement of luminous flux. The shift of forward voltage forward current curve and lumen degradation has been recorded to help build the failure model and predict the remaining useful life (RUL). Particle filter has been employed to assess the RUL of the bare LED. Model predictions of RUL have been correlated with experimental data. Results show that prediction of RUL of LEDs, made by the particle filter model, works with acceptable error-bounds. The presented method can be employed to predict the failure of LED caused by thermal and humid stresses.

Uncertainty Analysis in Lifetime Measurement for White Light Emitting Diodes

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Stray light errors in spectral colour measurement and two rejection methods

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Novel Measurement System and Analytical Method for White LED Phosphors

Uncertainty Analysis in Measurement for Led Junction Temperature and Thermal Resistance

Measurement of Led Spatial Intensity Distribution Using Imaging

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

Analysis of the Degradation of High Power Light Emitting Diode

Extrapolated lifetime prediction of light-emitting diode lights based on equivalent average luminance and accelerated degradation tests

Luminance degradation test and life prediction of LED light at conventional stress using TPWRAM

Reliability Evaluation of LED Lamp Beads Considering Multi-Stage Wiener Degradation Process Under Generalized Coupled Accelerated Stress

Assessment of the uncertainty for the measurement of photobiological safety of LED lighting products

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Life Test and Failure Mechanism Analyses for High-power LED

Prediction of Operational Lifetime of Perovskite Light Emitting Diodes by Machine Learning

A Weibull–lognormal-based life prediction model for LED light with four groups of ADTs

A Research on the Reliability of Light-Emitting Diode Based on Analyzing of Chip Image

An Analytical And Machine Learning Model For Spd Estimation And Its Prediction For Lumen And Chromaticity Shift Based Led Lifetime Performance Analysis

COLOR AND SPECTRAL CHARACTERISTICS OF WHITE LIGHT EMITTING DIODES AND THEIR VARIATION DURING AGING