Abstract:A two‐step optimization strategy enhances both density‐of‐state effective mass and multiple defects scattering with less compromising hole mobility, resulting in a ZTmax = 1.44 and a ZTavg = 1.28 (300–500 K) in Bi0.4Sb1.6Te2.95Se0.05 + 0.05 wt.% Ag5Te3. Moreover, by coupling n‐type zone‐melted Bi2Te2.7Se0.3, the 17‐pair thermoelectric module exhibits a competitive η = 6.1% at ΔT = 200 K for low‐grade heat harvest. Power generation modules utilizing thermoelectric (TE) materials are suitable for recycling widespread low‐grade waste heat (<600 K), highlighting the immediate necessity for advanced Bi2Te3‐based alloys. Herein, the substantial enhancement in TE performance of the p‐type Bi0.4Sb1.6Te3 (BST) sintered sample is realized by subtly incorporating the non‐stoichiometric Ag5Te3 and counteractive Se. Specifically, Ag atoms diffused into the BST lattice improve the density‐of‐states effective mass (md*) and boost the hole concentration for the suppressed bipolar effect. The addition of Se further improves md* prompting the room‐temperature power factor upgrade to 46 W cm−1 K−2. Concurrently, the lattice thermal conductivity is considerably lowered by multiple scattering sources exemplified by Sb‐rich nanoprecipitates and dense dislocations. These synergistic results yield a high peak ZT of 1.44 at 375 K and an average ZT of 1.28 between 300 and 500 K in the Bi0.4Sb1.6Te2.95Se0.05 + 0.05 wt.% Ag5Te3 sample. More significantly, when coupled with n‐type zone‐melted Bi2Te2.7Se0.3, the integrated 17‐pair TE module achieves a competitive conversion efficiency of 6.1% and an output power density of 0.40 W cm−2 at a temperature difference of 200 K, demonstrating great potential for practical applications.

Quaternary Thermoelectric Materials: Synthesis, Microstructure and Thermoelectric Properties of the (bi,sb)2(te,se)3 Alloys

Improved Thermoelectric Properties of Bi2Te3−xSexalloys by Melt Spinning and Resistance Pressing Sintering

Mid-temperature Thermoelectric Performance of Zone-Melted Sb2(Te,Se)3 Alloys Near Phase Transition Boundary

Thermoelectric Properties of Quaternary Ag-Bi-Sb-Te Alloys

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

Thermoelectric Properties of Hydrothermal Synthesized Bi-Te-Se Alloys

Expand band gap and suppress bipolar excitation to optimize thermoelectric performance of Bi0.35Sb1.65Te3 sintered materials

Optimized Thermoelectric Properties of Bi0.48Sb1.52Te3 Through AgCuTe Doping for Low-Grade Heat Harvesting.

Fast synthesis and thermoelectric properties of BixCu2−3xSe0.95Te0.05 (x = 0, 0.001, 0.002, 0.003, 0.004)

Enhanced Thermoelectric Performance of Te-Doped Bi2Se3−xTex Bulks by Self-Propagating High-Temperature Synthesis

Enhanced Thermoelectric Performance of P‐Type (Bi,Sb)2Te3 by Incorporating Non‐Stoichiometric Ag5Te3 and Refining Te‐Se Ratio

Enhancing the Thermoelectric Performance of GeSb4Te7 Compounds via Alloying Se

Improved Thermoelectric Properties of BiSbTe-AgBiSe 2 Alloys by Suppressing Bipolar Excitation

Thermoelectric Performance of P-Type Zone-Melted Se-doped Bi 0.5 Sb 1.5 Te 3 Alloys

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Crystal structure and thermoelectric properties of bulk polycrystalline (SbxBi1-x)2Se3 alloys

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

Influence of Ag2te Doping on the Thermoelectric Properties of P-Type Bi0.5sb1.5te3 Bulk Alloys

Influence of Ag_2Te Doping on the Thermoelectric Properties of p-type Bi_(0.5)Sb_(1.5)Te_3 Bulk Alloys

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi 0.48 Sb 1.52 Te 3 –AgSbSe 2 Composite