Abstract:This study explores the phenomenon of slip transmission across grain boundaries in coarse-grained copper. The associated effects on the deformation gradient are also investigated, using both experiment and simulation. An in-situ tensile test of a fully annealed copper specimen was conducted first using a scanning electron microscope (SEM). The deformation gradient and geometrically necessary dislocation (GND) maps at selected tensile strain values were obtained and characterized by electron backscatter diffraction (EBSD). In addition, a physically based strain gradient crystal plasticity finite element method model has been developed to simulate the early stage of tensile deformation behaviour of copper. In this model, slip transmission across the grain boundary is either allowed or blocked, depending on the alignment of adjacent grains. Slip transmission is allowed at grain boundaries between suitably aligned grains according to the Luster-Morris factor, residual Burgers vector is applied to consider the slip misalignment at GB region, and dislocation accumulation at grain boundaries is included following the Kocks-Mecking law. It was found that dislocation pile-up, lattice rotation and stress concentration were much higher near the impenetrable grain boundaries than at the penetrable ones. Due to the slip transmissions across grain boundaries, the stress and strain concentrations can be partially relaxed, and the slip transmission induced relaxation is associated with the number of active slip systems and shear strain on the best aligned slip systems. This study provides an effective strategy to investigate the early stage of plastic deformation, and a good agreement between experimental observations and simulation results has been achieved.

Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Microscopic Analysis by EBSD Method on Fatigue Crack Propagation Behaviour in Ultrafine-Grained Copper

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

In-situ observation of crack propagation through the nucleation of nanoscale voids in ultra-thin, freestanding Ag films

Fracture in A Thin Film of Nanotwinned Copper

Deformation Behavior and Microstructural Evolution of T-Shape Upsetting Test in Ultrafine-Grained Pure Copper

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Fracture Toughness Anisotropy of Ultrafine-Grained Pure Copper Processed by Equal Channel Angular Pressing

In-situ study of mineral liberation at the onset of fragmentation of a copper ore using X-ray micro-computed tomography

An investigation of slip transmission during uniaxial tensile deformation of a coarse-grained copper via EBSD characterization and crystal plasticity modelling

Combined coherent x-ray micro-diffraction and local mechanical loading on copper nanocrystals

On the fracture process of intermediate temperature embrittlement of pure copper in electrical-assisted tension

Investigation of ductile damage in dual phase steel during tensile deformation by in situ X-ray computed tomography

On Intrinsic Brittleness and Ductility of Intergranular Fracture along Symmetrical Tilt Grain Boundaries in Copper

A comprehensive study on the damage tolerance of ultrafine-grained copper

In Situ Observations of Crack Arrest and Bridging by Nanoscale Twins in Copper Thin Films

Investigation on void growth and coalescence in single crystal copper under high-strain-rate tensile loading by atomistic simulation