Abstract:The potential application of bulk high temperature superconductor (HTS) magnets has attracted much attention because of the potential high trapped flux in HTS magnets. This paper focuses on the magnetization method design of bulk multi-seeded HTS magnets for obtaining their better flux-trapping performance. Firstly, three different magnetization methods were carried out based on the current experimental setup to find a better way of magnetizing a bulk melt-texture three-seeded YBaCuO superconductor. The experimental results indicated that when the three domains of this three-seeded YBaCuO bulk were magnetized in order, the maximum trapped flux was higher than that when only one domain was magnetized. However, this method costs about three times of the magnetization time than the other two methods and the increasing ratio was only about 11.11%. It has been found that another method of magnetizing only the middle domain could also get a good result such as the uniformity of trapped flux is good. In order to improve the current experimental magnetization conditions for further improvement, two sheets of iron were designed to attach two poles of the electromagnet (Lakeshore, Model EM4-CV) for increasing the magnetizing area, and that all domains of a bulk multi-seeded HTS can be magnetized in one time. Firstly, the appropriate size and thickness of the iron sheets was simulated and optimized by Comsol Multiphysics. It has been found that the magnetic field between two poles was highest when the thickness of iron was 2 mm and the length was 68 mm. Then, the simulating and optimization results had been verified by the following experiments. According to the comparison experiments, it is proved that to choose the magnetization method that only magnetizing the middle domain with the improved setup is helpful to obtain larger and more homogeneous magnetic flux for the bulk multi-seeded HTS magnet due to the added iron sheets.

Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Study of the Pulsed Field Magnetization Strategy for the Superconducting Rotor

HTS Motor Performance Evaluation by Different Pulsed Field Magnetization Strategies

Comparative calculations of trapped field and trapped magnetic flux with different multi-pulse magnetization methods for a bulk high-temperature superconductor

Electromagnetic and Thermal Properties of HTS Bulk Combined With Different Ferromagnetic Structures Under Pulsed Field Magnetization

Simulation of High Temperature Superconducting Bulks Magnetized by Pulsed Field Magnetization with an Electromagnetic-Thermal Coupled Model

Practical technique of pulsed field magnetization for bulk HTS application

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique

Crossed fields magnetization of YBCO single-grain bulk superconductors

Simulation of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization Using Controlled Magnetic Density Distribution Coils

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Generating Uniform Magnetic Fields Using Pulse Field Magnetisation

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Magnetization Method Design of Bulk Multi-Seeded High Temperature Superconductors

A Novel Hybrid Magnet Made of HTS Tape Stacks and Permanent Magnets for Motor Applications

Control and Operation of A High Temperature Superconducting Synchronous Motor

Numerical Study on Solidification Characteristics under Pulsed Magnetic Field