Abstract:The no-insulation (NI) high-temperature superconductor (HTS) winding technique enables the fabrication of highly compact magnets with self-quench protection. NI pancake coils are implemented to develop a 28-T HTS magnet for the operation of a 792-GHz gyrotron, which is a microwave source for dynamic nuclear polarization nuclear magnetic resonance. To this end, three NI all-GdBCO double pancake (DP) magnets were fabricated using different winding diameters and procedures. The objective was to explore different mechanical coil protection mechanisms at high magnetic fields, including clamping, overband, and solder impregnation. Experiments in liquid helium using magnets with winding diameters of 18, 25, and 66 mm yielded a center field of 14.4, 11.2, and 8.1 T, respectively. The maximum currents applied to the DP magnets ranged from 780 to 1000 A. Both the 18 and 66 mm DP coils contained 400 m (2 × 200 m) HTS tape, while the 25 mm seamless DP coil consisted of only one continuous 200 m HTS tape. The 25 mm magnet with solder impregnation showed the best repeatability, although the current density was reduced owing to the solder thickness between the coil windings. Critical to the implementation of such coils in liquid helium is to effectively transfer high currents to the magnet, while not compromising the helium boil-off. Furthermore, the design of hybrid copper-HTS current leads capable of carrying current larger than 1000 A from room temperature to the HTS magnet at 4.2 K is presented. The implementation of liquid nitrogen-cooled hybrid copper-HTS current leads reduced the helium boil-off and permitted independent temperature control of the current leads.

Generating Uniform Magnetic Fields Using Pulse Field Magnetisation

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Simulation of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization Using Controlled Magnetic Density Distribution Coils

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique

Comparative calculations of trapped field and trapped magnetic flux with different multi-pulse magnetization methods for a bulk high-temperature superconductor

Simulation of High Temperature Superconducting Bulks Magnetized by Pulsed Field Magnetization with an Electromagnetic-Thermal Coupled Model

Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

Study of the Pulsed Field Magnetization Strategy for the Superconducting Rotor

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

Electromagnetic Design Of Hts Insert For Ultrahigh Field Nmr Magnet

Electromagnetic and Thermal Properties of HTS Bulk Combined With Different Ferromagnetic Structures Under Pulsed Field Magnetization

Simplified magnet design and manufacture based on patterning of wide conductors

Practical technique of pulsed field magnetization for bulk HTS application

A Large-Bore HTS Magnet for Generating AC Magnetic Field

Insert Magnet and Shim Coils Design for a 27 T Nuclear Magnetic Resonance Spectrometer with Hybrid High and Low Temperature Superconductors

A design of novel type superconducting magnet for super-high field functional magnetic resonance imaging by using the harmonic analysis method of magnetic vector potentials

A Practical Superconducting DC Dynamo for Charging Conduction-Cooled HTS Magnet

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

Design of Superconducting Magnet for Background Magnetic Field