Abstract:Pulse field magnetization (PFM) method for high-temperature superconducting (HTS) bulks is attractive for promoting the use of HTS technology in various applications. Waveform control pulse field magnetization (WCPM) method is new techniques which has shown promising results so far in trapping strong magnetic fields by a single pulsed magnetic field. The cause of most of the magnetic field penetrating in the bulk by the application of a pulsed magnetic field not to be trapped is thought to be the local heat generated by the steep flux motion caused by the increase and decrease of that pulsed magnetic field. In this presentation, we show the results of magnetization under controlled conditions so that the magnetic flux that once entered the HTS bulk does not abruptly decrease. The penetration flux density measured on the surface of the GdBCO bulk was used as input to control the negative feedback as in previous studies. The bulk was placed between two vortex-type coils that replicated the internal structure of our previously developed axial-gap superconducting rotating2. At 40 K, by generating a pulsed magnetic field by negative-feedback-WCPM (NFB-WCPM) with a slight decrease in flux density, we applied almost constant magnitude magnetic flux density to the bulk sample for more than 1 s, and obtained a flux density nearly three times higher than the maximum flux density obtained with conventional PFM. NFB-WCPM worked effectively to obtain high trapped flux density even at 40 K. The bulk sample successfully trapped a flux density of nearly 4 T for less than two seconds by a single NFB-WCPM by adjusting the control conditions.

Practical technique of pulsed field magnetization for bulk HTS application

A Novel Analytical Frozen Permeability Method for Saturated Surface-Mounted Permanent Magnet Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Pulse Field Magnetization of GdBCO without Rapid Decrease in Magnetic Flux Density

Comparative calculations of trapped field and trapped magnetic flux with different multi-pulse magnetization methods for a bulk high-temperature superconductor

Simulation of High Temperature Superconducting Bulks Magnetized by Pulsed Field Magnetization with an Electromagnetic-Thermal Coupled Model

Electromagnetic and Thermal Properties of HTS Bulk Combined With Different Ferromagnetic Structures Under Pulsed Field Magnetization

Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Fast Current Regulation and Persistent Current Maintenance of High-Temperature Superconducting Magnets with Contact Power Supply and Flux Pump

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Generating Uniform Magnetic Fields Using Pulse Field Magnetisation

A Practical Superconducting DC Dynamo for Charging Conduction-Cooled HTS Magnet

A Pulsed Current Charging Mechanism for High Temperature Superconducting Magnets

Reliable 4.8 T trapped magnetic fields in Gd–Ba–Cu–O bulk superconductors using pulsed field magnetization

Simulation of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization Using Controlled Magnetic Density Distribution Coils

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

A Design Study on 20 kW Class Axial Flux Motor with HTS Field Winding for 100 MPa Liquid Hydrogen Pump