Abstract:Hardness, activation volume and strain-rate sensitivity of Cu/Cr (face-centered cubic (fcc)/body-centered cubic) and Cu/Zr (fcc/hexagonal close-packed) nanostructured multilayer films have been systematically measured as a function of modulation period (L) and modulation ratio (η), respectively. Significant size effects were found for all the three plastic deformation characteristics, i.e. enhanced hardness and activation volume but reduced strain-rate sensitivity with decreasing the dimension length L. Microstructure evolution was statistically examined to rationalize these size dependences. It was crucially observed that abundant nanotwins existed in the Cu grains, though nanotwin formation was depressed with smaller L. This inverse size-dependent nanotwin formation is responsible for the reduction in strain-rate sensitivity, because the negative effect induced by the decreased nanotwins predominates over the positive effect coming from the raised interfaces/boundaries. A mechanistic model is modified to account for the interface effect as well as the nanotwin effect, which yields calculations of strain-rate sensitivity in broad agreement with the experimental results when L is larger than about 20nm. Below this critical length size, there are discrepancies between the calculations and the experimental results, due to the change in deformation mechanism from dislocation nucleation/slip in confined layers to dislocation crossing interfaces. A confined layer slip model is also modified by considering the nanotwin strengthening to quantitatively describe the L-dependent hardness. In addition, the effects of constituent phases and their relative content on the activation volume and strain-rate sensitivity of NMFs are discussed with regard to variation in η.

Intrinsic Size Effect of Cuta/Cu Nanolaminates with Unequal Modulation Ratios

Structure-Dependent Size Effects in Cuta/Cu Nanolaminates

Effects of size and amorphous layer structure on the strength and plasticity of Cu/CuZr nanolaminates

Effects of Cu Layers on the Deformation Behavior of CuTa/Cu Multilayer Thin Films

Size-Dependent Deformation Mechanisms and Strain-Rate Sensitivity in Nanostructured Cu/X (X = Cr, Zr) Multilayer Films

Size-dependent Hardness and Tensile Plasticity of Ta-Zr 61 Cu 17.5 Ni 10 Al L7.5 Si 4 Nanolaminates

Unique Mechanical Properties of Cu/(NbMoTaW) Nanolaminates

Probing The Size- And Constituent-Mediated Mechanical Properties And Deformation Behavior In Crystalline/Amorphous Nanolaminates

Length Scale Dependent Mechanical/Electrical Properties of Cu/X (x=cr, Nb) Nanostructured Metallic Multilayers

Nanoindentation Study Of A Cu/Ta/Sio2/Si Multilayer System

Intrinsic and extrinsic size effects on deformation in nanolayered Cu/Zr micropillars: From bulk-like to small-volume materials behavior

Shear Banding Deformation in Cu/Ta Nano-Multilayers

Size dependent mechanical properties of nanocrystalline Cu films

Size dependence for mechanical properties of Ti/Cu multilayered nanowire with a semi-coherent interface

Size- and constituent-dependent deformation mechanisms and strain rate sensitivity in nanolaminated crystalline Cu/amorphous Cu–Zr films

Size- and Strain-Dependent Buckle Dimensions of Nanostructured Cu/Nb Multilayers on Polyimide Substrates

Length scale dependent ductility and fracture behavior of Cu/Nb nanostructured metallic multilayers

Tensile deformation and fracture mechanisms of Cu/Nb nanolaminates studied by in situ TEM mechanical tests

Uniaxial Tension Deformation Study of Copper/nickel Laminated Composites: Effects of Lamella Number and Interlamellar Spacing

Deformation Kinetics In Cu/Ta Nanoscale Multi Layers

Tailoring Nanostructured Cu/Cr Multilayer Films with Enhanced Hardness and Tunable Modulus