Abstract:Molecular dynamics simulations are performed to study the mechanical properties and deformation mechanisms of a heterogeneous face-centered cubic/ body-centered cubic Cu/Ta nanolayered composite under uniaxial tension and compression. The results show that the stress-strain curves exhibit two main yield points in tension while only one yield point during compression, and the deformation primarily experiences three stages. The first stage is linearly elastic at small strains, followed by the nucleation and propagation of dislocations and stacking faults in the Cu layers, and eventually the Ta layers yield to plastic deformation. The yield of the specimen is mainly determined by the dislocation evolution in the hard phase (i.e. Ta layers), which leads to a sharp drop in the stress-strain curve. We show that the heterogeneous nanolayered composite exhibits a good deformation compatibility during compression but an obvious deformation incompatibility between Cu and Ta layers in tension. The temperature effect is also systematically investigated. It is revealed that the yield of the specimen at higher temperature depends only on the dislocation evolution in the thick Ta layers, and the yield strengths in tension and compression both decrease with the increasing temperature. In particular, our computations show that high temperature can significantly suppress the dislocation activities in the Cu layers during deformation, which results in a lower dislocation density of the Cu layers compared with that of the Ta layers and thus causing an incompatible fashion among the constituent layers.

Anomalous Plastic Deformation in Nanoscale Cu/Ta Multilayers

Two softening stages in nanotwinned Cu

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Size-Dependent Dislocation-Twin Interactions

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Nanoscratching-induced plastic deformation mechanism and tribology behavior of Cu/Ta bilayer and multilayer by a molecular dynamics study

Exploring nanoscale metallic multilayer ta/cu films: Structure and some insights on deformation and strengthening mechanisms

Evolution of Interfacial Structures and Creep Behavior of Cu/Ta Multilayers at Room Temperature

Influence of grain boundary and twin boundary on the stretching deformation behaviors of Cu/Ta interface material

Tuning Length Scale Effect of Hardness in Ag/Nb/Cu/Nb Multilayers by Nb Amorphous Interlayer

Amorphous-CuTa/amorphous-CoZrNb Multilayers: Structure, Mechanical Properties and Thermal Stability

Cyclic Deformation Induced Strengthening and Unusual Rate Sensitivity in Cu/Ru Nanolayered Films

Atomistic simulations of mechanical response of a heterogeneous fcc/bcc nanolayered composite

Shock-induced twinning/detwinning and spall failure in Cu-Ta nanolaminates at atomic scales

Atomic assembly of Cu/Ta multilayers: Surface roughness, grain structure, misfit dislocations, and amorphization

Anomalous softening behavior in Ti/Ni multilayers with ultra-high hardness

Influence of interface on deformation compatibility of a heterogeneous Cu/Al nanoscale multilayer

Alloy strengthening toward improving mechanical and tribological performances of Cu x Ni 100−x /Ta nano multilayer materials

Intersectant Coherent Twin Boundaries Governed Strong Strain Hardening Behavior in Nanocrystalline Cu

Ultra-high strength and plasticity mediated by partial dislocations and defect networks: Part II: Layer thickness effect