Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Evolution of Interfacial Structures and Creep Behavior of Cu/Ta Multilayers at Room Temperature

Anomalous Plastic Deformation in Nanoscale Cu/Ta Multilayers

Size dependence of creep behavior in nanoscale Cu/Co multilayer thin films

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Microstructure and mechanical properties of nanoscale Cu/Ni multilayers

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Influence Of Interfacial Texture On Solid-State Amorphization And Associated Asymmetric Growth In Immiscible Cu-Ta Multilayers

Structural and Dynamical Properties of Heterogeneous Solid–liquid Ta–Cu Interfaces: A Molecular Dynamics Study

Influence of grain boundary and twin boundary on the stretching deformation behaviors of Cu/Ta interface material

Size-dependent Strain Rate Sensitivity and Interface Structure Influenced Deformation Mechanisms in Ti/Ta and Ti/Zr Multilayers

Unveiling the Microstructure Evolution and the Short-Time Tensile Creep Behavior in the CuCrZr Alloy

Length Scale Effect on the Thermal Stability of Nanoscale Cu/Ag Multilayers

Atomic assembly of Cu/Ta multilayers: Surface roughness, grain structure, misfit dislocations, and amorphization

Structure-Dependent Size Effects in Cuta/Cu Nanolaminates

High-Temperature Ta Diffusion in the Grain Boundary of Thin Cu Films

Size-dependent high temperature deformation and microstructure

Nanoscratching-induced plastic deformation mechanism and tribology behavior of Cu/Ta bilayer and multilayer by a molecular dynamics study

Effects of Cu Layers on the Deformation Behavior of CuTa/Cu Multilayer Thin Films

Length-scale-dependent Deformation Mechanism of Cu/X (x=ru, W) Multilayer Thin Films

Interface Stability and Microstructure of an Ultrathin Α-Ta/graded Ta(N)/TaN Multilayer Diffusion Barrier