Abstract:The thermal-hydrodynamic characteristics of a single-phase turbulent flow in chevron-type plate heat exchangers with sinusoidal-shaped corrugations have been numerically investigated in this article. The computational domain contains a corrugation channel, and the simulations adopted the shear-stress transport - model as the turbulence model. The numerical simulation results in terms of Nusselt number and friction factor were compared with limited experimental data and existing correlations in order to verify the accuracy of the numerical model. The validation was performed using single-phase water as the working fluid. A bi-objective optimization was carried out using an approximation-assisted optimization technique, which provided considerable computational savings to ensure the feasibility of optimization. The corrugation depth, corrugation angle, corrugation pitch, and fluid inlet velocity were identified as design variables, and 200 samples were selected using the maximum entropy design method to build the metamodel for obtaining the heat transfer coefficient as well as the pressure drop per unit length. A multi-objective genetic algorithm was utilized as the optimizer. The optimization results were presented in the form of Pareto solution set, which clearly showed its dominance over the entire design space and the tradeoff between the two optimization objectives: maximizing heat transfer coefficient and minimizing drop per unit length. Also, the Pareto optimal designs were validated against the values directly obtained from numerical simulations. The approximation-assisted optimization shows that all optimal designs have largest enlargement factor values inside the design space, and the optimal corrugation angle increases with the increase of maximum heat transfer coefficient.

Multi-Objective Optimization of Geometrical Parameters of Corrugated-Undulated Heat Transfer Surfaces Using CFD, Artificial Neural Networks and Genetic Algorithms

Multi-objective optimization of geometrical parameters of corrugated-undulated heat transfer surfaces

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Multi-objective Optimization of Turbulent Heat Transfer Flow in Novel Outward Helically Corrugated Tubes

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Structural parameter design of welded plate heat exchanger based on multi-objective optimization algorithm

Enhancement of thermal and flow characteristics in helically coiled tubes with corrugated surfaces by Genetic Algorithm based optimization

Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations

Multi-objective Shape Optimization of a Heat Exchanger Tube Fitted with Compound Inserts

Single- and multi-objective optimization of a plate-fin heat exchanger with offset strip fins adopting the genetic algorithm

Application of Response Surface Method and Multi-Objective Genetic Algorithm to Configuration Optimization of Shell-and-tube Heat Exchanger with Fold Helical Baffles

Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization

Numerical Analysis of Air Flow Resistance and Heat Transfer Between Corrugated Plates with Channels of Varied Heights

The numerical simulation research for the heat transfer and flow of the large-scale helically corrugated pipe

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger

Multi-Objective Optimization of Serrated Fin in Plate-Fin Heat Exchanger by Fluid Structure Interaction

Optimization of porous insert configurations for heat transfer enhancement in tubes based on genetic algorithm and CFD

Multi-objective Optimization to Increase Nusselt Number and Reduce Friction Coefficient of Water/Carbon Nanotubes via NSGA II using Response Surface Methodology