Abstract:Purpose The purpose of this study is to numerically and experimentally investigate the natural convection heat transfer in flat plates and plates with square, trapezoidal and triangular corrugations. Design/methodology/approach This work is an extension of the previous studies by Verderio et al. (2021a, 2021b, 2021c, 2021d, 2022a). An experimental apparatus was built to measure the plates' temperatures during the natural convection cooling process. Several physical parameters were evaluated through the experimental methodology. Free and open-source computational tools were used to simulate the experimental conditions and to quantitatively and qualitatively evaluate the thermal plume characteristics over the plates. Findings The numerical results were experimentally validated with reasonable accuracy in the range of studied RaLP for the different plates. Empirical correlations of Nu ̄LPexp=f(RaLP) , h ̄conv=f(RaLP) and Nu ̄LPexp⋅(A/AP)=f(RaLP) , with good accuracy and statistical representativeness, were obtained for the studied geometries. The convective thermal efficiency of corrugated plates (Δη), as a function of RaLP , was also experimentally studied quantitatively. In agreement with the findings of Oosthuizen and Garrett (2001), the experimental and numerical results proved that the increase in the heat exchange area of the corrugations has a greater influence on the convective exchange and the thermal efficiency than the disturbances caused in the flow (which reduce h ̄conv ). The plate with trapezoidal corrugations presented the highest convective thermal efficiency, followed by the plates with square and triangular corrugations. It was also proved that the thermal efficiency of corrugated plates increases with RaLP . Practical implications The results demonstrate that corrugated surfaces have greater thermal efficiency than flat plates in heating and/or cooling systems by natural convection. This way, corrugated plates can reduce the dependence on auxiliary forced convection systems, with application in technological areas and Industry 4.0. Originality/value The empirical correlations obtained for the corrected Nusselt number and thermal efficiency for the corrugated plate geometries studied are original and unpublished, as well as the experimental validation of the developed three-dimensional numerical code.

Numerical Analysis of Air Flow Resistance and Heat Transfer Between Corrugated Plates with Channels of Varied Heights

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Research on Heat and Mass Transfer Performance of Corrugated Coils in Closed Cooling Towers

Numerical investigation on falling film flow and heat transfer characteristics over corrugated plates

Cfd Analysis on Flow Resistance Characteristics of Six-Start Spirally Corrugated Tube

Numerical and experimental study of natural convection heat transfer on flat and corrugated plates

Thermal Performance of a Corrugated Wall With Artificial Roughness

Numerical study of heat transfer of laminar air flow in perforated trapezoidal corrugated plate-fin ducts

Impact of non-uniform heat flux conditions on convective heat transfer and energy efficiency in a corrugated tube

A Computational Study of Enhanced Heat Transfer in Laminar Flows of Non-Newtonian Fluids in Corrugated-Plate Channels

Influence of corrugated jet plates on internal heat transfer and flow dynamics of double-wall cooling: experimental-numerical approach

Analysis of Fluid Flow and Heat Transfer in Corrugated Perforated Plate Fin Heat Sinks

Numerical Simulation Of Heat And Mass Transfer In Air-Water Direct Contact Using Computational Fluid Dynamics

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

CFD Simulation of Fluid Flow and Heat Transfer in Channels of Plate-Fin Heat Exchangers

Numerical Investigation on Flow and Heat Transfer Mechanism of Corrugated Cooling Channel in Turbine Blades