Abstract:Sapphire has shown broad application prospects in military and medical fields, due to its high hardness, excellent corrosion resistance and high transmission in the infrared band. However, these characteristics have also brought about lots of difficulties in machining or chemical etching the material. Femtosecond laser processing with excellent characteristics including small heat-affected zones and high processing resolution ratio, has become an emerging field. Therefore, it has important application prospects and has found increasingly wide applications in the fields of material modification and high-quality fabrication of three-dimensional micro-nano structures and devices. In this paper, we propose a method in which femtosecond laser processing based on multi-photon absorption is used to process sapphire beyond the optical diffraction limit. In this work, femtosecond laser with a central wavelength of 343 nm is focused on the sapphire and the surface of sapphire is scanned with the high-precision piezoelectric positioning stages. Nano structures each with a width of about 61 nm are obtained, and the minimum space between the nano structures could be as short as about 142 nm. Further, the influences on the processing resolution from laser power and scanning speed are investigated and the generation mechanism for the nano-ripple structure is discussed. Finally, femtosecond laser processing on the sapphire with a resolution beyond the optical diffraction limit is achieved. This work provides a reference for processing the hard and brittle materials by femtosecond laser.

Sapphire-Based Dammann Gratings for Uv Beam Splitting

DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Dammann gratings as integratable micro-optical elements created by laser micronanofabrication via two-photon photopolymerization.

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Wavefront preserving and high efficiency diamond grating beam splitter for x-ray free electron laser

Focused Ion Beam Lithography of Multiperiod Gratings for A Wavelength-Division-Multiplexed Transmitter Laser Array

Low-threshold stimulated emission at 249 nm and 256 nm from AlGaN-based multiple-quantum-well lasers grown on sapphire substrates

Femtosecond Laser Inscribed Helical Sapphire Fiber Bragg Gratings.

Sapphire Concave Microlens Arrays for High-Fluence Pulsed Laser Homogenization

Wear-Resistant Blazed Gratings Fabricated by Etching-Assisted Femtosecond Laser Lithography

Fabrication of an Anti-Reflective Microstructure on Sapphire by Femtosecond Laser Direct Writing.

Ultrafast Laser-Inscribed Nanogratings in Sapphire for Geometric Phase Elements.

Sapphire-Based Fresnel Zone Plate Fabricated by Femtosecond Laser Direct Writing and Wet Etching

Sub-diffraction-limit fabrication of sapphire by femtosecond laser direct writing

Designing and Optimizing Highly Efficient Grating for High-Brightness Laser Based on Spectral Beam Combining

Multilevel Phase-Type Diffractive Lens Embedded in Sapphire.

Femtosecond laser plane-by-plane inscription of Bragg gratings in sapphire fiber

Single-mode sapphire fiber Bragg grating

The fabrication of a 25x25 multiple beam splitter

Fabrication of Optical Elements with Femtosecond Doubled-Frequency Ti:sapphire Laser