Abstract:We have thoroughly clarified the mesoscopic nature of serration behavior in a high-Mn austenitic steel in connection with its characteristic localized deformation. A typical high-Mn steel, Fe-22Mn-0.6C (wt. %), with a face centered cubic (FCC) single-phase structure was used in the present study. After 4 cycles of repeated cold-rolling and annealing process, a specimen with a fully recrystallized microstructure having a mean grain size of 2.0 μm was obtained. The specimen was tensile tested at room temperature at an initial strain rate of 8.3 ✗ 10−4 s−1, during which the digital image correlation (DIC) technique was applied for analyzing local strain and strain-rate distributions in the specimen. Obtained results indicated that a unique strain localization behavior characterized by the formation, propagation and annihilation of deformation localized bands, so-called Portevin–Le Chatelier (PLC) bands, determined the global mechanical response appearing as serration on the stress-strain curve. In addition, the in-situ synchrotron XRD diffraction during the tensile test was utilized to understand what was happening in the material with respect to the PLC banding. Lattice strain of (200) plane nearly perpendicular to the tensile direction dropped when every PLC band passed through the beam position, which indicated a stress relaxation occurred inside the PLC band. At the same time, the dislocation density increased drastically when the PLC band passed the beam position, which described that the material was plastically deformed and work-hardened mostly within the PLC band. All the results obtained consistently explained the serration behavior in a mesoscopic scale. The serration behavior on the stress-strain curve totally corresponded to the formation, propagation and annihilation of the PLC band in the 22Mn-0.6C steel, and the localized deformation, i.e., the PLC banding, governed the characteristic strain hardening of the material.

The Mechanism of Critical Strain of Serrated Yielding in Strain Rate Domain

Intrinsic Versus Extrinsic Effects on Serrated Flow of Bulk Metallic Glasses

A study of local mechanical properties of 304L SS welded joints subjected to cyclic straining using depth-sensing instrumented indentation

Two Mechanisms for the Normal and Inverse Behaviors of the Critical Strain for the Portevin–Le Chatelier Effect

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Temporal Statistical Analysis of Serrated Yielding in Al-Cu Polycrystals

An Innovative Yield Criterion Considering Strain Rates Based on Von Mises Stress

Experimental Study and Mechanism Analysis of the Serrated Plastic Instability of Alloy Materials

Strain Rate Effect on Dislocation Climb Mechanism Via Self-Interstitials

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Mesomechanical Aspects of the Strain-Rate Sensitivity of Armco-Iron Pulled in Tension

A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Thermal Analysis of Serrated Yielding in an Al-Mg Alloy

Influence of strain rate on the compressive behavior of heterogeneous Cu/Ta multilayer: A molecular dynamics simulation study

Mesoscopic nature of serration behavior in high-Mn austenitic steel

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect

Strain rate dependency of dislocation plasticity

MACRO-AND MESO-MECHANISM STUDY OF STRAIN LOCALIZATION IN GRANULAR MATERIAL

Statistical analysis of serrated flows in CoNiV medium-entropy alloy