Abstract:The Portevin-Le Chatelier (PLC) effect refers to one type of plastic instability, which Often manifests itself as discontinuous yielding and localized deformation in some metallic alloys deformed under certain conditions. A phenomenological model based on a multiscale analysis is developed to investigate the PLC effect. In this model, a new component of stress is introduced, which takes account of the collective interactions between mobile dislocations and solute atoms, to describe the influence of dynamic strain aging (DSA) on the flow stress. The effects of microscopic pinning and unpinning of dislocations on the macroscopic deformation behavior are considered in an integrative and competitive manner. Due to the competition of these two effects during deformation, the alloys may exhibit the negative strain rate sensitivity of flow stress, which is a necessary condition for the occurrence of the PLC effect. A nonuniform. spatial distribution of some material parameters was used in the model to reflect the heterogeneous nature of the deformed material, including a linear change of the initial cross-sectional area and a random perturbation of the initial internal stress. Numerical simulations based on this heterogeneous model were carried out for tensile testing of aluminum alloy 2017, by which the serrated yielding and localized deformation behavior were successfully reproduced. The results also indicate the relation between the macroscopic jerky flow and the pinning/unpinning of dislocations at the micro level.

Statistical analysis of serrated flows in CoNiV medium-entropy alloy

A flow model in CoCrFeMnNi high-entropy alloys during high-temperature tension

Intrinsic Versus Extrinsic Effects on Serrated Flow of Bulk Metallic Glasses

Temporal Statistical Analysis of Serrated Yielding in Al-Cu Polycrystals

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect

Portevin-Le Chatelier Mechanism in Face-Centered-cubic Metallic Alloys from Low to High Entropy

Preliminary Time Series Analysis of Serrated Yielding in Al-4%Cu Alloy

Influence of Γ′ Precipitates on the Critical Strain and Localized Deformation of Serrated Flow in Ni-based Superalloys

Experimental investigations on kinetics of Portevin–Le Chatelier effect in Al–4wt.%Cu alloys

The Influence of Temperature on the PLC Effect in Al-Mg Alloy

In Situ Analysis of the Portevin-Le Chatelier Effect from Low to High-Entropy Alloy in Equal HfNbTaTiZr System

On temperature and strain-rate dependence of flow serration in HfNbTaTiZr high-entropy alloy

Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems

Experimental Study and Mechanism Analysis of the Serrated Plastic Instability of Alloy Materials

A Macroscopic Model for the Portevin-Le Chatelier Effect

Hidden order in serrated flow of metallic glasses

Experimental investigation of a Portevin-Le Chatelier band in Ni-Co-based superalloys in relation to ' precipitates at 500 C

Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy and High-Entropy Alloys

Effect of Solute Concentration on Portevin-Le Chatelier Effect in Al-Cu Alloys

Hot deformation behavior and flow stress modeling of a novel CoNi-based wrought superalloy

Investigation on Portevin-Le Chatelier Effect in a Ni-Co Based Superalloy Base on Digital Speckle Correlation