Abstract:A power clamp circuit, which has good immunity to false trigger under fast power-on conditions with a 20 ns rising edge, is proposed in this paper. The proposed circuit has a separate detection component and an on-time control component which enable it to distinguish between electrostatic discharge (ESD) events and fast power-on events. As opposed to other on-time control techniques, instead of large resistors or capacitors, which can cause a large occupation of the layout area, we use a capacitive voltage-biased p-channel MOSFET in the on-time control part of the proposed circuit. The capacitive voltage-biased p-channel MOSFET is in the saturation region after the ESD event is detected, which can serve as a large equivalent resistance (~106 Ω) in the structure. The proposed power clamp circuit offers several advantages compared to the traditional circuit, such as having at least 70% area savings in the trigger circuit area (30% area savings in the whole circuit area), supporting a power supply ramp time as fast as 20 ns, dissipating the ESD energy more cleanly with little residual charge, and recovering faster from false triggers. The rail clamp circuit also offers robust performance in an industry-standard PVT (process, voltage, and temperature) space and has been verified by the simulation results. Showing good performance of human body model (HBM) endurance and high immunity to false trigger, the proposed power clamp circuit has great potential for application in ESD protection.

Novel Insights into the Power-off and Power-on Transient Performance of Power-Rail ESD Clamp Circuit

Investigation on the Gate Bias Voltage of BigFET in Power-rail ESD Clamp Circuit for Enhanced Transient Noise Immunity

Design of a Novel Static-Triggered Power-Rail ESD Clamp Circuit in a 65-Nm CMOS Process

Transient Electrothermal Analysis of Interconnects in the Presence of a ESD pulse

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

New Power Clamp Circuit for Concurrent ESD and Surge Protections

Design of Power-Rail ESD Clamp Circuit with Separate Detection Component and Delay Component Against Mis-Triggering

A Prolonged Discharge Time ESD Power-Rail Clamp Circuit Structure with Strong Ability to Prevent False Triggering

A Low-Leakage Power Clamp ESD Protection Circuit with Prolonged ESD Discharge Time and Compact Detection Network.

A Novel Low-Leakage ESD Power Clamp Circuit with Adjustable Transient Response Time

Power-rail ESD Clamp Circuit with Hybrid-Detection Enhanced Triggering in a 65-Nm, 1.2-V CMOS Process.

A False Trigger-Strengthened and Area-Saving Power-Rail Clamp Circuit with High ESD Performance

Transient Electrothermal Analysis of Multilevel Interconnects in the Presence of ESD Pulses Using the Nonlinear Time-Domain Finite-Element Method

Modeling Study of Power-On and Power-Off System-Level Electrostatic Discharge Protection

Power-Rail Esd Clamp Circuit With Parasitic-Bjt And Channel Parallel Shunt Paths To Achieve Enhanced Robustness

A novel multi-RC-triggered power clamp circuit for on-chip ESD protection

Area-Efficient Power-Rail ESD Clamp Circuit with False-Trigger Immunity in 28nm CMOS Process

Study of Turn-on Characteristics of SCRs for ESD Protection with TDR-O and TDR-S TLPs

Transient and Static Hybrid-Triggered Active Clamp Design for Power-Rail ESD Protection

Double Snapback Phenomena in Transient Power-Rail Esd Clamp Circuits for Latch-Up Free Concerns

ESD Pulse Width Effect on RC-triggered NMOS with Power on or Off