Abstract:This work presents a methodology combining SEM, EDS, conventional EBSD, and transmission-EBSD to analyse a recrystallised Zircaloy-4 sheet and cold-worked stress-relieved (CWSR) Zircaloy-4 cladding in unprecedented detail. Second-phase precipitates (SPPs) in Zircaloy-4 specimens were revealed after chemical polishing using a solution containing hydrofluoric acid (HF). Pitting corrosion of Zircaloy-4 specimens was revealed after electropolishing using an electrolyte containing HClO4 . A zirconium coupon without SPPs was used to confirm the chemical response of SPPs on surface morphology. Intrinsic features of cold-worked Zircaloy-4 such as relatively small grain sizes, high dislocation density, and complex microstructure make it significantly more difficult to collect excellent EBSD results compared to recrystallised Zircaloy-4. The fine hydride structure of as-hydrided CWSR Zircaloy-4 cladding further increases the level of challenge on EBSD analysis. Lay description: We present a methodology combining multiple microscopic methods to analyse a recrystallised Zircaloy-4 sheet and cold-worked stress-relieved (CWSR) Zircaloy-4 cladding, important alloys of structural materials widely used in nuclear application, and emphasis on the challenge of acquiring a satisfactory electron backscatter diffraction (EBSD) result of CWSR Zircaloy-4 cladding material in great details. EBSD is a powerful technique to characterise the crystallographic distribution and lattice type of conductive crystalline materials, especially for a highly textured material like CWSR Zircaloy-4 alloy. However, zirconium alloys are known to be one of the most difficult materials to prepare for EBSD characterisation. We point out that the configuration of the microstructure of the specimen cause the challenge in the EBSD sample preparations. Moreover, the occurrence of tiny zirconium hydride precipitates in Zircaloy-4 increases the difficulty. We believe that the information of the EBSD sample preparation related results in this paper can provide researchers and scientists in this community a useful reference to speed up the EBSD sample preparation of CWSR Zircaloy-4 cladding material and to expect the corresponding EBSD results.

Mechanical Properties of Zircaloy-4 Cladding Tube by Advanced Expansion Due to Compression (A-Edc) Test

Development of Advanced Expansion Due to Compression (A-Edc) Test Method for Safety Evaluation of Degraded Nuclear Fuel Cladding Materials

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

A comparative study of hydride-induced embrittlement of Zircaloy-4 fuel cladding tubes in the longitudinal and hoop directions

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Numerical simulation of mechanical interaction between pellet and zircaloy-4 cladding under reactivity-initiated accident conditions

Multiaxial Plastic Deformation of Zircaloy-4 Nuclear Fuel Cladding Tubes

Expansion Deformation Mechanism and Cracking Behaviours of Chromium-Coated Zirconium Alloy Cladding at Room Temperature

Post-quench ductility limits of coated ATF with various zirconium-based alloys and coating designs

Expansion deformation mechanism and cracking behaviors of chromium-coated zirconium alloy cladding at room temperature

Development of axial and ring hoop tension testing methods for nuclear fuel cladding tubes

INVESTIGATION OF THE DEFORMATION BEHAVIORS OF DIFFUSION-BONDED CR-ZIRCALOY BILAYER MATERIALS UNDER TENSILE TESTS

Deformation mechanism and cyclic stress response of Zircaloy-4 alloy cladding tube during low cycle fatigue at room temperature

Post-LOCA ductility of Cr-coated cladding and its embrittlement limit

A study on the fracture pattern change of high-burnup fuel cladding failed by pellet-cladding mechanical interaction failure under reactivity-initiated accident conditions

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

The challenge of acquiring a satisfactory EBSD result of CWSR Zircaloy-4 cladding tube

Numerical Investigation of Ballooning and Burst for Chromium Coated Zircaloy Cladding

Effect of uniaxial loading direction on mechanical responses and texture evolution in cold pilgered Zircaloy-4 tube: Experiments and modeling

Temperature-dependent axial mechanical properties of Zircaloy-4 with various hydrogen amounts and hydride orientations

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain