Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Stable Inverted Low-Bandgap Polymer Solar Cells with Aqueous Solution Processed Low-Temperature ZnO Buffer Layers

Toward High Performance Inverted Polymer Solar Cells

Stability of Inverted Organic Solar Cells with Low‐temperature ZnO Buffer Layer Processed from Aqueous Solution

Aqueous Solution Processed, Ultrathin ZnO Film with Low Conversion Temperature As the Electron Transport Layer in the Inverted Polymer Solar Cells

Inverted Polymer Solar Cells Integrated with A Low-Temperature-Annealed Sol-Gel-Derived Zno Film As an Electron Transport Layer

Efficiency and Air-Stability Improvement of Flexible Inverted Polymer Solar Cells Using ZnO/poly(ethylene Glycol) Hybrids As Cathode Buffer Layers.

High-Performance Inverted Polymer Solar Cells with Zirconium Acetylacetonate Buffer Layers.

Inverted polymer solar cells integrated with a low‐temperature‐annealed sol‐gel‐derived ZnO film as an electron transport layer

Low Temperature Aqueous Solution-Processed Zno and Polyethylenimine Ethoxylated Cathode Buffer Bilayer for High Performance Flexible Inverted Organic Solar Cells

Mechanism of Inverted Polymer Solar Cells Based on Poly(dopamine)/zno As Composite Cathode Buffer Layer

Inverted Organic Solar Cells Based on Aqueous Processed ZnO Interlayers at Low Temperature

Bandgap Tunable Zn1‐xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High‐Performance Inverted Polymer Solar Cells

Efficient "light-soaking"-free inverted organic solar cells with aqueous solution processed low-temperature ZnO electron extraction layers

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

Low Temperature Aqueous Solution-Processed Li Doped Zno Buffer Layers for High Performance Inverted Organic Solar Cells

Nanostructured Cathode Buffer Layers for Inverted Polymer Solar Cells

Efficient Inverted Polymer Solar Cells with ITO Cathode Modified by Zinc Oxide and Polyethylene Oxide Bilayers

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Solvothermal Synthesis of Zno Nanoparticles at Low Temperatures As Cathode Buffer Layers for Polymer Solar Cells with an Inverted Device Structure

Low-temperature In-Situ Preparation of ZnO Electron Extraction Layer for Efficient Inverted Polymer Solar Cells

Efficient inverted polymer solar cells using low-temperature zinc oxide interlayer processed from aqueous solution