Abstract:<p>Solution‐processed zinc oxide (ZnO) is one of the widely used electron transporting layers (ETLs) for organic solar cells (OSCs). However, low optical transparency along with thickness‐sensitivity of ZnO ETL constrains the improvement of photovoltaic performance and large‐scale fabrication compatibility. To resolve these issues, zirconium (Zr) doping is applied to tailor the optoelectronic and morphological properties of ZnO layer. This approach not only improves light transmittance with the suppressed parasitic absorption, but also provides an optimized surface morphology for enhancing charge extraction property and reducing potential of charge trap‐assisted recombination. By using ZnO:Zr as ETL in inverted device configuration, the maximum power conversion efficiency (PCE) of PM6:Y6:PC<sub>71</sub>BM solar cell devices is up to 17.2%, which makes an enhancement of 9.55% compared to ZnO‐based devices (15.7%). As the thickness of ZnO:Zr ETL increases to ≈60 nm, the presence of the lower parasitic absorption together with uniform surface morphology can help photovoltaic performance maintain above 15%, which is beyond the performance of the pristine ZnO‐based device achieving only 11.9%. Such superiority of ZnO:Zr ETL is also validated by a series of well‐known BHJ systems, where in comparison with the devices based on pristine ZnO ETL, a better photovoltaic performance from ZnO:Zr device can be achieved.</p>

Inverted Organic Solar Cells Based on Aqueous Processed ZnO Interlayers at Low Temperature

Efficient "light-soaking"-free inverted organic solar cells with aqueous solution processed low-temperature ZnO electron extraction layers

Aqueous Solution Processed, Ultrathin ZnO Film with Low Conversion Temperature As the Electron Transport Layer in the Inverted Polymer Solar Cells

Inverted Organic Solar Cells With Low-Temperature Al-Doped-Zno Electron Transport Layer Processed From Aqueous Solution

Highly Efficient And Stable Planar Heterojunction Perovskite Solar Cells Via A Low Temperature Solution Process

Stability of Inverted Organic Solar Cells with Low‐temperature ZnO Buffer Layer Processed from Aqueous Solution

Inverted Organic Photovoltaic Cells with Solution-Processed Zinc Oxide As Electron Collecting Layer

Solution processed Al-doped ZnO nanoparticles/TiOx composite for highly efficient inverted organic solar cells

Efficient inverted polymer solar cells using low-temperature zinc oxide interlayer processed from aqueous solution

Stable Inverted Low-Bandgap Polymer Solar Cells with Aqueous Solution Processed Low-Temperature ZnO Buffer Layers

Precursor Engineering to Reduce Processing Temperature of ZnO Films for Flexible Organic Solar Cells.

Enhanced Performance of Inverted Non-Fullerene Organic Solar Cells by Using Metal Oxide Electron- and Hole-Selective Layers with Process Temperature ≤150 °C.

Efficient Inverted Ito-Free Organic Solar Cells Based On Transparent Silver Electrode With Aqueous Solution-Processed Zno Interlayer

Increased Electron Transport and Hole Blocking in an Aqueous Solution Processed Dye-Doped ZnO Cathode Interlayer for High Performance Organic Solar Cells

Low-Temperature Solution-Processed Zinc Tin Oxide Film As a Cathode Interlayer for Organic Solar Cells.

Low Temperature Aqueous Solution-Processed Li Doped Zno Buffer Layers for High Performance Inverted Organic Solar Cells

Efficient Indium-Tin-Oxide Free Inverted Organic Solar Cells Based On Aluminum-Doped Zinc Oxide Cathode And Low-Temperature Aqueous Solution Processed Zinc Oxide Electron Extraction Layer

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells

Enhanced Electron Transportation by Dye Doping in Very Low-Temperature (< 130 Degrees C)-Processed Sol-Gel ZnO Toward Flexible Organic Solar Cells