Abstract:There has been a growing interest in the development of efficient flexible organic solar cells (OSCs) due to their unique capacity to provide energy sources for flexible electronics. To this end, it is required to design a compatible interlayer with low processing temperature and high electronic quality. In this work, we present that the electronic quality of the ZnO interlayer fabricated from a low-temperature (130 °C) sol–gel method can be significantly improved by doping an organic small molecule, TPT-S. The doped TPT-S, on the one hand, passivates uncoordinated Zn-related defects by forming N–Zn bonds. On the other hand, photoinduced charge transfer from TPT-S to ZnO is confirmed, which further fills up electron-deficient trap states. This renders ZnO improved electron transport capability and reduced charge recombination. By illuminating devices with square light pulses of varying intensities, we also reveal that an unfavorable charge trapping/detrapping process observed in low-temperature-processed devices is significantly inhibited after TPT-S doping. OSCs based on PBDB-T-2F:IT-4F with ZnO:TPT-S being the cathode interlayer yield efficiencies of 12.62 and 11.33% on rigid and flexible substrates, respectively. These observations convey the practicality of such hybrid ZnO in high-performance flexible devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c23087?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c23087</a>.UV–vis absorption spectrum of pure and hybrid ZnO films; Tauc plots of ZnO, TPT-S, and TPT-doped ZnO films; AFM height images, FTIR spectra, and energy-level diagram of TPT-S and ZnO; device structure and chemical structure of the active layer; optimization of the TPT-S doping weight ratio; EQE spectra of three types of devices and corresponding EQE enhancement ratio; integrated current density; transmittance (T) spectra and total absorption (1 – R – T) spectra; J–V curves of electron-only devices; Jsc versus light intensity of three types of devices plotted in the log x–log y scale; extraction photocurrent transient in photo-CELIV experiments of three types of devices; and photovoltaic performance parameters of devices based on different TPT-S doping weight ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c23087/suppl_file/am0c23087_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

This paper aims to solve the charge - trapping problem in the low - temperature - processed ZnO layer in flexible organic solar cells (OSCs). Specifically: 1. **Charge - trap suppression**: The low - temperature - processed ZnO layer is prone to form charge traps due to the existence of uncoordinated Zn - related defects, which leads to a decrease in charge - transfer efficiency and an increase in charge recombination. By introducing the small organic molecule TPT - S to dope ZnO, the paper found that TPT - S can form N - Zn bonds with ZnO, thereby passivating these defects and reducing charge traps. 2. **Charge - transfer improvement**: TPT - S doping not only reduces charge traps but also further fills the electron - defect states in ZnO through photo - induced charge transfer from TPT - S to ZnO, improving the electron - transfer ability of ZnO. 3. **Device - performance enhancement**: Through the above improvements, the flexible organic solar cell with a PBDB - T - 2F:IT - 4F active layer shows a significantly improved power - conversion efficiency (PCE) when using TPT - S - doped ZnO as the cathode - interface layer. On a rigid substrate, the highest PCE reaches 12.62%, and on a flexible substrate, the PCE also reaches 11.33%. In conclusion, this paper successfully solves the charge - trapping problem in the low - temperature - processed ZnO layer through molecular - doping methods, significantly improving the performance of flexible organic solar cells. This method provides a new approach for developing highly efficient and stable flexible organic solar cells.

Molecular Doping Inhibits Charge Trapping in Low-Temperature-Processed ZnO toward Flexible Organic Solar Cells

Enhanced Electron Transportation by Dye Doping in Very Low-Temperature (< 130 Degrees C)-Processed Sol-Gel ZnO Toward Flexible Organic Solar Cells

Doping of ZnO Electron Transport Layer with Organic Dye Molecules to Enhance Efficiency and Photo‐Stability of the Non‐Fullerene Organic Solar Cells

Low-Temperature Solution-Processed Zinc Tin Oxide Film As a Cathode Interlayer for Organic Solar Cells.

Correction to “molecular Doping Inhibits Charge Trapping in Low-Temperature Processed ZnO Towards Flexible Organic Solar Cells”

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Aqueous Solution Processed, Ultrathin ZnO Film with Low Conversion Temperature As the Electron Transport Layer in the Inverted Polymer Solar Cells

Efficient Flexible Inverted Small-Bandgap Organic Solar Cells with Low-Temperature Zinc Oxide Interlayer

In‐Doped ZnO Electron Transport Layer for High‐Efficiency Ultrathin Flexible Organic Solar Cells

Increased Electron Transport and Hole Blocking in an Aqueous Solution Processed Dye-Doped ZnO Cathode Interlayer for High Performance Organic Solar Cells

Highly Efficient Regular Polymer Solar Cells Based on Li-TFSI Doping ZnO As Electron-Transporting Interlayers

Doping ZnO with Water/Alcohol-Soluble Small Molecules As Electron Transport Layers for Inverted Polymer Solar Cells.

High Performance Organic Solar Cells Based on ZnO: POT2T As an Effective Cathode Interfacial Layer

Zinc Oxide Coated Carbon Dot Nanoparticles as Electron Transport Layer for Inverted Polymer Solar Cells

New Insight into the Lewis Basic Sites in Metal–Organic Framework-Doped Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Efficient Non-Fullerene Organic Solar Cells Based on Thickness-Insensitive Conjugated Small Molecule Cathode Interface

Simple Solvent Treatment Enabled Improved PEDOT:PSS Performance Toward Highly Efficient Binary Organic Solar Cells

Naphthalimide Molecular‐Doped Zinc Oxide Cathode Interfacial Layer Inhibits Charge Trapping in Organic Solar Cells

Morphology Optimization of Organic Solar Cells Enabled by Interface Engineering of Zinc Oxide Layer with a Conjugated Organic Material

Facilitating Electron Collection of Organic Photovoltaics by Passivating Trap States and Tailoring Work Function

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells