Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Inverted Photovoltaic Device Based on ZnO and Organic Small Molecule Heterojunction

Hybrid inverted organic photovoltaic cells based on nanoporous TiO2 films and organic small molecules

The Photocurrent Improvement of Inverted Polymer Solar Cells Using ZnPc to Extend Light Absorption Range

Exquisite modulation of ZnO nanoparticle electron transporting layer for high-performance fullerene-free organic solar cell with inverted structure

Inverted Small Molecule Organic Photovoltaic Cells on Reflective Substrates

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

Inverted &Amp;ldquo;p-I-n&rdquo; Structure Perovskite Solar Cells

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

A Combination of Al-doped ZnO and a Conjugated Polyelectrolyte Interlayer for Small Molecule Solution-Processed Solar Cells with an Inverted Structure

A hybrid ZnO nanoparticle electron transporting layer for inverted structure organic solar cells with efficiency over 19%

Organic/inorganic Hybrid Solar Cells with Vertically Oriented ZnO Nanowires

Nanostructured hybrid ZnO@CdS nanowalls grown in situ for inverted polymer solar cells

Multiple Electron Transporting Layers and Their Excellent Properties Based on Organic Solar Cell

Inverted Organic Photovoltaic Cells with Solution-Processed Zinc Oxide As Electron Collecting Layer

The Inverted Solar Cells with the Polymer:Fullerene Blend Film Possessing a Stratified Composition Profile

High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer.

Optimization of inverted tandem organic solar cells

The Efficient N-Doping of [6,6]-Phenyl C61-butyric Acid Methyl Ester by Leuco-Crystal Violet to Enhance the Performance of Inverted Organic Solar Cells

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Polydopamine/ZnO electron transport layers enhance charge extraction in inverted non-fullerene organic solar cells

Inverted polymer solar cells integrated with a low‐temperature‐annealed sol‐gel‐derived ZnO film as an electron transport layer