Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Inverted polymer solar cells integrated with a low‐temperature‐annealed sol‐gel‐derived ZnO film as an electron transport layer

Toward High Performance Inverted Polymer Solar Cells

Inverted Polymer Solar Cells Integrated with A Low-Temperature-Annealed Sol-Gel-Derived Zno Film As an Electron Transport Layer

Inverted Polymer Solar Cells with a Solution-Processed Zinc Oxide Thin Film As an Electron Collection Layer

Nanostructured Cathode Buffer Layers for Inverted Polymer Solar Cells

Electron and Hole Transport Layers: Their Use in Inverted Bulk Heterojunction Polymer Solar Cells

Aqueous Solution Processed, Ultrathin ZnO Film with Low Conversion Temperature As the Electron Transport Layer in the Inverted Polymer Solar Cells

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Efficient Polymer Solar Cells by Lithium Sulfonated Polystyrene As a Charge Transport Interfacial Layer

Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

Highly efficient, inverted polymer solar cells with indium tin oxide modified with solution-processed zwitterions as the transparent cathode.

Stable Inverted Low-Bandgap Polymer Solar Cells with Aqueous Solution Processed Low-Temperature ZnO Buffer Layers

Inverted Polymer Solar Cells with 8.4% Efficiency by Conjugated Polyelectrolyte

Inverted polymer solar cells integrated with small molecular electron collection layer

High Efficiency and High V-Oc Inverted Polymer Solar Cells Based on A Low-Lying Homo Polycarbazole Donor and A Hydrophilic Polycarbazole Inter Layer on Ito Cathode

Inverted Polymer Solar Cells with Zn 2 SnO 4 Nanoparticles As the Electron Extraction Layer

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

Efficient and Stable Inverted Polymer Solar Cells Using TiO2 Nanoparticles and Analysized by Mott-Schottky Capacitance

Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells.

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

Efficient solution‐processed small‐molecule solar cells with inverted structure