Abstract:The low catalytic activity of activated carbon (AC) toward oxygen reduction reaction (ORR) in air cathode severely limits the electricity production of microbial fuel cells (MFCs). In this work, a novel cobalt-nitrogen-carbon nanotube co-implanted activated carbon catalysts (CoNC@AC) were prepared by growth of Co/Zn-based metal organic frameworks on AC followed by thermal pyrolysis. The CoNC@AC catalyzed ORR via an efficient four-electron pathway in pH-neutral medium, and exhibited superb ORR catalytic activity comparable to commercial Pt/C. As compared with pristine AC, implantation of Co, N and carbon nanotubes into CoNC@AC improved the ORR current density and exchange current density of air cathodes by 120% and 73% respectively. The maximumpower density of MFCs achieved 2045 +/- 43 mW m(-2) by using the optimized CoNC@AC pyrolyzed at 850 degrees C, which was 65% higher than that of pristine AC. The superb ORR performance of CoNC@AC originated from the synergistic effect of abundant Co-Nx, Pyridinic-N and Graphitic-N active sites, high graphitization degree, well dispersed Co nanoparticles and improved micro-mesoporous coexistence structure, which enabled high ORR catalytic activity and rapid mass transfer at the three-phase boundary. This work provides a new routine for large-scale synthesis of highly-efficient ORR electrocatalysts based on AC and metal organic frameworks, which has promising potential for the application in practical MFCs.

Temperature-Depended Cu0.92co2.08o4 Modified Activated Carbon Air Cathode Improves Power Output in Microbial Fuel Cell

N-Type Cu2o Doped Activated Carbon As Catalyst for Improving Power Generation of Air Cathode Microbial Fuel Cells

Nanorod CoFe2O4 Modified Activated Carbon As an Efficient Electrocatalyst to Improve the Performance of Air Cathode Microbial Fuel Cell

Nitrogenous mesoporous carbon coated with Co/Cu nanoparticles modified activated carbon as air cathode catalyst for microbial fuel cell

The excellent performance of nest-like oxygen-deficient Cu1.5Mn1.5O4 applied in activated carbon air-cathode microbial fuel cell.

The excellent performance and mechanism of activated carbon air cathode doped with different type of cobalt for microbial fuel cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Activated carbon supported Fe-Cu -NC as efficient cathode catalyst for the microbial fuel cell

Carnation-like MnO2 Modified Activated Carbon Air Cathode Improve Power Generation in Microbial Fuel Cells

Long‐Term Performance of Chemically and Physically Modified Activated Carbons in Air Cathodes of Microbial Fuel Cells

The performance and mechanism of modified activated carbon air cathode by non-stoichiometric nano Fe3O4 in the microbial fuel cell

Use of Pyrolyzed Iron Ethylenediaminetetraacetic Acid Modified Activated Carbon As Air-Cathode Catalyst in Microbial Fuel Cells.

A co-doped oxygen reduction catalyst with FeCu promotes the stability of microbial fuel cells

Metal Organic Framework-Derived Co3O4/NiCo2O4 Double-Shelled Nanocage Modified Activated Carbon Air-Cathode for Improving Power Generation in Microbial Fuel Cell

Carbon-Supported Binary Transition Metal Chalcogenide Used As Cathode Catalyst for Oxygen Reduction in Microbial Fuel Cell

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Porous Metal-Organic Framework Cu3(BTC)2 As Catalyst Used in Air-Cathode for High Performance of Microbial Fuel Cell

Cu-doped CaFeO3 perovskite oxide as oxygen reduction catalyst in air cathode microbial fuel cells

Cobalt‐based Catalysts Modified Cathode for Enhancing Bioelectricity Generation and Wastewater Treatment in Air‐breathing Cathode Microbial Fuel Cells

Hierarchically Porous N-doped Carbon Encapsulating CoO/MgO As Superior Cathode Catalyst for Microbial Fuel Cell

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells