Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of Conductive Copper Patterns Using Reactive Inkjet Printing Followed by Two-Step Electroless Plating

Fabrication of copper patterns on flexible substrate by patterning-adsorption-plating process.

The Pseudoenzyme PDX1.2 Boosts Vitamin B6 Biosynthesis under Heat and Oxidative Stress in Arabidopsis*

Preparation of Selective Conductive Copper Patterns by Pen-on-paper Writing Combined with Electroless Plating

Fabrication of Conductive Copper Patterns Using Photocatalyst-activated Electroless Deposition

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

Epoxy Resin-Assisted Cu Catalytic Printing for Flexible Cu Conductors on Smooth and Rough Substrates

Fabrication of User-Defined Copper Conductive Patterns Onto Paper Substrate for Flexible Electronics by Combining Wax Patterning with Electroless Plating

Self-reducible copper inks composed of copper–amino complexes and preset submicron copper seeds for thick conductive patterns on a flexible substrate

Laser Direct Activation of Polyimide for Selective Electroless Plating of Flexible Conductive Patterns

Fabrication of dual-side metal patterns onto textile substrates for wearable electronics by combining wax-dot printing with electroless plating

Preparation of Conductive Cu Patterns by Directly Writing Using Nano-Cu Ink

Unraveling the Mechanism of Plasma‐Induced Curing of Particle‐Free Complex Inks for Manufacturing of High‐Performance Flexible Copper Films and Patterns

Fabrication of Shape‐Controlled Copper Line Arrays by Meniscus‐Confined 3D Microprinting on Insulating Substrates

Low-temperature sintering of silver patterns on polyimide substrate printed with particle-free ink

Reactive Sintering of Cu Nanoparticles at Ambient Conditions for Printed Electronics

3D Porous Polysiloxane Ion-Adsorption Films for Additive Fabrication of Conductive Patterns with High Adhesion

PET Surface Modification with Inkjet-Printing Pd 2+ /Epoxy Resin Solution for Selective Electroless Copper Plating

A facile and universally applicable additive strategy for fabrication of high-quality copper patterns based on a homogeneous Ag catalyst ink

High-reproducibility, Flexible Conductive Patterns Fabricated with Silver Nanowire by Drop or Fit-to-flow Method

Formulation of Screen-Printable Cu Molecular Ink for Conductive/Flexible/Solderable Cu Traces