Abstract:Double perovskite solar cells have attracted much attention for their low cost, high performance, environmental friendliness, and strong stability. In this study, the effect of thickness of perovskite layer, band offset, metal electrode work function, the thickness and doping concentration of the transport layer on the efficiency of Cs 2 AgBi 0.75 Sb 0.25 Br 6 solar cells were analyzed using Silvaco TCAD to improve device performance. This initial study of device based on Spiro-OMeTAD as hole transport layer (HTL) and ZnO as electron transport layer (ETL), which shows a photovoltaic conversion efficiency (PCE) of 12.66%. The results show that the efficiency gradually saturates when the thickness of the perovskite layer is greater than 500 nm. The optimal conduction band offset (CBO) is from 0 eV to +0.5 eV, and the optimal valence band offset (VBO) is from -0.1 eV to +0.2 eV. After varying the device's ETL as ZnOS and HTLs as MoO 3 , Cu 2 O and CuSCN, respectively, and optimizing their thicknesses and doping concentrations. The final theoretical photovoltaic conversion efficiency of the double perovskite solar cell with a HTL of Cu 2 O reaches 22.85%, which is a relative improvement of 25.6% over the currently reported theoretical efficiency value. Moreover, the optimal efficiency is achieved when the metal electrode work function is less than -4.9 eV. This work will help find suitable materials for the transport layer and provide guidance for the development of high-performance and lead-free perovskite solar cells.

Enhanced Performance of Planar Perovskite Solar Cells Via Incorporation of Bphen/Cs2co3-Moo3 Double Interlayers

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Enhancement of the Efficiency and Stability of Planar P-I-n Perovskite Solar Cells Via Incorporation of an Amine-Modified Fullerene Derivative As a Cathode Buffer Layer

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

ZnO/SnO2 Double Electron Transport Layer Guides Improved Open Circuit Voltage for Highly Efficient CH3NH3PbI3-Based Planar Perovskite Solar Cells

High-performance Planar Heterojunction Perovskite Solar Cells: Preserving Long Charge Carrier Diffusion Lengths and Interfacial Engineering

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC 71 BM

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr3 Perovskite Solar Cells

Simultaneously Enhanced J(Sc) And Ff By Employing Two Solution-Processed Interfacial Layers For Inverted Planar Perovskite Solar Cells

Deciphering the Morphology Change and Performance Enhancement for Perovskite Solar Cells Induced by Surface Modification

Elucidating the Roles of TiCl4 and PCBM Fullerene Treatment on TiO2 Electron Transporting Layer for Highly Efficient Planar Perovskite Solar Cells

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr 3 Perovskite Solar Cells

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells

Ordered Growth of Cs2AgBiBr6 Double Perovskites on PEIE-decorated SnO2 for Efficient Planar Solar Cells

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

Enhanced Performance and Light Soaking Stability of Planar Perovskite Solar Cells Using an Amine-Based Fullerene Interfacial Modifier

Double-layer synergistic optimization by functional black phosphorus quantum dots for high-efficiency and stable planar perovskite solar cells

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Optimized design of Cs 2 AgBi 0.75 Sb 0.25 Br 6 perovskite solar cell