Abstract:By synergizing the DFT approach with SCAPS‐1D simulations, this study comprehensively elucidates the optoelectronic and photovoltaic attributes of Cs2TiBr6‐based perovskite solar cells. 40 configurations involving various ETLs and HTLs are explored, among them, a notable efficiency of 24.82% is achieved for the device architecture ITO/LBSO/Cs2TiBr6/CNTS/Au. This work aspires to positively steer sustainable PV advancement. In recent times, the remarkable advancements achieved in the field of perovskite solar cells (PSCs) have sparked significant research efforts aimed at enhancing their overall performance because of their exceptional optoelectronic properties. Due to the toxicity of lead (Pb), the emergence of Ti‐based (Cs2TiBr6) double‐halide PSCs is regarded as a good alternative to Pb‐based PSCs. Here, density functional theory (DFT) calculations are performed to examine the prospect of Cs2TiBr6 perovskite as a layer of absorber for photovoltaic cells (SCs). These computations looked at the material's structural, optical, and electrical characteristics. The density of states (DOS) results demonstrate strong conductivity, principally provided by the 4p states of Br, whilst Ti‐3d and Cs‐5p orbital electrons offer insignificant contributions. The electronic band structure discloses a direct band gap of 1.534 eV. The covalent connections that exist between Ti and Br atoms and the robust electronic charge density around the Ti atom both demonstrate a significant buildup of electronic charge along the 100 planes. The dielectric function and the coefficient of absorption have significance irrespective of lower energies because it is extremely valuable for solar energy applications. The UV absorption peaks of Cs2TiBr6 have a maximum of ≈15.51 eV and are magnified with photon energy up to 2.46 eV, indicating that it may have potential for solar applications. This work also investigated a good combination of the hole transport layer (HTL) and electron transport layer (ETL) with the Cs2TiBr6 absorber layer. AZnO, Nb2O5, LBSO, and Zn2SnO4 are executed as the ETLs, and MoO3, CuAlO2, MEH‐PPV, ZnTe, CNTS, GaAs, MoS2, PTAA, Cu2Te, Zn3P2 are considered as the HTLs to identify the best HTL/Cs2TiBr6/ETL combinations using the SCAPS‐1D numerical simulation. Among all configurations, ITO/LBSO/Cs2TiBr6/CNTS/Au is examined as the best‐optimized structure of Ti‐based PSC, with JSC of 26.63 mA cm−2, a VOC of 1.123 V, FF of 82.94%, and a power conversion efficiency of 24.82%. To validate the findings, PV parameters like the effect of generation rate, recombination rate, J−V, and Q‐E characteristics are evaluated. The effect of series and shunt resistance and structure working temperature are explored to observe the effect of these on PSC devices. The accomplished outcomes suggest that Cs2TiBr6 can be viewed as an optimistic material for PSCs for its higher stability and environment‐friendly characteristics.

Optimized design of Cs 2 AgBi 0.75 Sb 0.25 Br 6 perovskite solar cell

Optimal design of Cs 2 AgBi 0.75 Sb 0.25 Br 6 perovskite solar cells

Designing and Optimizing the Lead-Free Double Perovskite Cs2AgBiI6/Cs2AgBiBr6 Bilayer Perovskite Solar Cell

Design and Device Numerical Analysis of Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cell

Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers

Study on the Key Parameters Affecting the Power Conversion Efficiency of Cs2AgBiBr6-Based Perovskite Solar Cells

Numerical investigation and design optimization for enhanced efficiency of Cs2AgBiBr6 perovskite solar cell

Double Side Interfacial Optimization for Low-Temperature Stable CsPbI 2 Br Perovskite Solar Cells with High Efficiency Beyond 16%

Band Matching Strategy for All-Inorganic Cs2AgBiBr6 Double Perovskite Solar Cells with High Photovoltage

Overcoming the Limitation of Cs 2 AgBiBr 6 Double Perovskite Solar Cells Through Using Mesoporous TiO 2 Electron Extraction Layer

SCAPS-1D Modeling of Hydrogenated Lead-Free Cs2AgBiBr6 Double Perovskite Solar Cells with a Remarkable Efficiency of 26.3%

Self-energy correction and numerical simulation for efficiency lead-free double perovskite solar cells.

Efficient Nonlead Double Perovskite Solar Cell with Multiple Hole Transport Layers

Dual Interfacial Engineering for Efficient Cs 2 AgBiBr 6 Based Solar Cells

Construction of Efficient Cs2AgBiBr6 Perovskite Solar Cells by Enhancing Hole‐Selective Contact with Deep‐Level Dopant‐Free Hole Transport Material

Design and Performance Exploration of a Lead-Free All-Inorganic Hydrogenated Cs2AgBiBr6-Based Double Perovskite Solar Cell: A Numerical Modeling Study

Study on the Performance of CuBr2 Doped Cs2AgBiBr6 Perovskite Solar Cells with Carbon Electrode and Without a Hole-Transporting Layer

Ordered Growth of Cs2AgBiBr6 Double Perovskites on PEIE-decorated SnO2 for Efficient Planar Solar Cells

Enhanced Performance of CsPbBr3 Perovskite Solar Cells by Reducing the Conduction Band Offsets Via a Sr-modified TiO2 Layer

High-Quality Cs2 AgBiBr6 Double Perovskite Film for Lead-Free Inverted Planar Heterojunction Solar Cells with 2.2 % Efficiency.

Exploring the Optoelectronic and Photovoltaic Characteristics of Lead‐Free Cs2TiBr6 Double Perovskite Solar Cells: A DFT and SCAPS‐1D Investigations