Abstract:Rare-earth elements (which include all lanthanides, scandium, and yttrium) play a key role in many fields including oil refining, metallurgy, electronics manufacturing, and other high-technology applications. Although the available lanthanide resources are enough for current levels of manufacturing, increased future demand for lanthanides will require new, efficient recovery methods to provide a sustainable supply. Membrane adsorbers are promising separation materials to recover lanthanides from high volumes of wastewater due to their tailorable surface chemistry, high binding capacity and high throughput. In this work, membrane adsorbers were synthesized by first using ultraviolet-initiated free radical polymerization to graft a poly(glycidyl methacrylate) (p-GMA) layer to the surface of polyethersulfone membranes. Then, the reactive epoxy groups of the grafted p-GMA were used for the covalent attachment of lysine molecules via a zinc perchlorate-catalyzed, epoxide ring-opening reaction at 35°C. Changes in membrane surface chemistry throughout the functionalization process were monitored with Fourier Transform Infrared Spectroscopy. The degree of grafting for the p-GMA film was quantified gravimetrically and increased with increasing polymerization time. Equilibrium adsorption experiments were performed for single specie solutions of La3+, Ce3+, Nd3+, Na+, Ca2+, and Mg2+ at pH 5.25 ± 0.25. Lysine-modified membranes showed negligible uptake of Na+, Ca2+, and Mg2+. The maximum capacities modeled by the Langmuir isotherm for La3+ and Ce3+ were 6.11 ± 0.58 and 6.45 ± 1.29 mg/g adsorbent, respectively. Nd3+ adsorbed to the membrane; however, the fit of the Langmuir model was not significant and it adsorbed to a lower extent than La3+ and Ce3+. Lower adsorption of the higher charge density species indicates that the primary binding mode is through the amine moieties of lysine and not the carboxylic acid. Dynamic adsorption experiments were conducted with 1 ppm La3+ feed solutions at different flow rates using either a single membrane or three membranes in series. The dynamic binding capacity at 50% breakthrough was independent of flowrate within the tested range. The low-temperature membrane functionalization methodology presented in this work can be used to immobilize biomolecules with even higher specificity, like engineered peptides or proteins, on membrane surfaces.

Selective Adsorption of La3+ Using a Tough Alginate-Clay-Poly(n-isopropylacrylamide) Hydrogel with Hierarchical Pores and Reversible Re-Deswelling/Swelling Cycles

Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Selective adsorption and high recovery of La<SUP>3+</SUP> using graphene oxide/poly (<i>N</i>-isopropyl acrylamide-maleic acid) cryogel

Rare Earth Metal Ions Adsorption Using 2-[2-Oxo-2-(1-pyrrolidinyl)ethoxy]acetic acid/Sodium Alginate Gel

Preparation of micron-sized alginate-based particles for rare earth adsorption

Regulation of pyruvate metabolism in metabolic-related diseases

Selective Adsorption and High Recovery of La3+ using Graphene Oxide/Poly (N-Isopropyl Acrylamide-Maleic Acid) Cryogel

Soluble HLA-G molecules are increased in lymphoproliferative disorders.

Emulsion synthesis of cellulose/lanthanum alginate /La (III) composite microspheres for efficient and selective adsorption of phosphate

Antioxidant activity of synthetic diarylamines: a mitochondrial and cellular approach.

Fabrication of sodium alginate-doped carbon dot composite hydrogel and its application for La (III) adsorption and enhanced the removal of phosphorus

Sustainable lanthanum-attapulgite/alginate hydrogels with enhanced mechanical strength for selective phosphate scavenging

Selective removal and recovery of La(III) using a phosphonic-based ion imprinted polymer: Adsorption performance, regeneration, and mechanism

A Chitosan-Based Y3+-Imprinted Hydrogel with Reversible Thermo-Responsibility for the Recovery of Rare Earth Metal

A Lysine-Modified Polyethersulfone (PES) Membrane for the Recovery of Lanthanides

Stability Analysis and Control of Nonlinear Phenomena in Boost Converters Using Model-Based Takagi–Sugeno Fuzzy Approach

Selective removal of aluminum ions from rare earth solutions by using ion-imprinted polymers

Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

Novel phosphate functionalized sodium alginate hydrogel for efficient adsorption and separation of Nd and Dy from Co

Fabrication of phosphate functionalized chiral nematic mesoporous silica films for the efficient and selective adsorption of lanthanum ions

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal