Regulation of pyruvate metabolism in metabolic-related diseases

N. Jeoung,C. Harris,Robert A. Harris

DOI: https://doi.org/10.1007/s11154-013-9284-2

2014-03-01

Abstract:

What problem does this paper attempt to address?

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Xingyu WU,Yaoqi Lei,Yanzong Zhang,Zhenxing Zeng,lulu Long,Xiaojing Wang,Yan He,Gang Yang,Fei Shen,Yan Liu

DOI: https://doi.org/10.2139/ssrn.4255786

2022-01-01

Abstract:It is of great significance and value to develop new phosphorus adsorbents to reduce water pollution and recycle phosphorus. In this work, Y 3+ was embedded in chitosan/polyvinyl alcohol hydrogel beads by adsorption of amino functional groups and heavy metal ions, and a new type of yttrium chitosan-based hydrogel adsorbent (PC-Y-OH) was synthesized in situ on the hydrogel spheres by alkali treatment. The experimental results showed that the equilibrium pH affected the adsorption process of phosphate, and the adsorption capacity reached the highest value at pH 3. In addition, PC-Y-OH preferentially adsorbs phosphate when other substances (Cl - , NO 3 - , NO 2 - , HCO 3 - , SO 4 2- , NH 4 + , Ca 2+ , Mg 2+ , and humic acid) coexist. The adsorption mechanism of phosphate was mainly electrostatic interaction and ligand exchange under acidic conditions. However, ligand exchange and Lewis acid-base interaction were the main mechanisms in alkaline conditions. The adsorption kinetics and thermodynamics showed that the adsorption of phosphate was a multi-layer covering and chemisorption process and was non-spontaneous exothermic.
Fabrication of sodium alginate-doped carbon dot composite hydrogel and its application for La (III) adsorption and enhanced the removal of phosphorus

Xiao Zhang,Shiwen Luo,Jiaxin Duan,Tao Lan,Yun Wei

DOI: https://doi.org/10.1007/s11356-023-29958-9

IF: 5.8

2023-09-25

Environmental Science and Pollution Research

Abstract:Adsorption is an effective method for the removal of hazardous substances from wastewater. In this work, a low-cost and environmental-friendly composite hydrogel material of sodium alginate doped with nitrogen doped carbon dots (SA@NCDs) was fabricated by impregnation for lanthanide and enhanced phosphorus adsorption in wastewater. The effects of NCDs doping amount, dosage, pH, initial solution concentration, adsorption time and temperature on the process of La (III) adsorption by SA@NCDs were investigated. The adsorption isotherms fitted to Langmuir isotherm model (R2 = 0.9970–0.9989) and the adsorption kinetics followed pseudo-second-order kinetic model (R2 = 0.9992). The maximum adsorption capacity of the adsorbent for La (III) was 217.39 mg/g according to the Langmuir model at 298.15 K. After five cycles, the removal efficiency of La (III) adsorbed by SA@NCDs was still 85.1%. Moreover, the loaded La (III) enhanced the adsorption of phosphorus. The La (III)-SA@NCDs-5 hydrogel adsorbent greatly improved the adsorption capacity for phosphorus compared with the La (III)-free adsorbent, and the adsorption amount can reach 9.64 mg-P/g. The SA@NCDs complex hydrogels for rare earth adsorption were prepared by introducing NCDs rich in amino group into SA hydrogels. The introduction of NCDs increases the adsorption sites of hydrogels, and also overcomes the problem that NCDs itself is difficult to recover in wastewater treatment applications. The lanthanide adsorbed material has a stable structure and can be used to remove phosphorus to deal with waste using the waste. It indicates the SA@NCDs hydrogel composite adsorbent have good potential for wastewater treatment.Graphical Abstract

environmental sciences
Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Mingyun Dai,Yadong Zhang,Leping Zhang,Ye Tian,Gang Liu,Jian Zhao,Ying Liu,Songming Zhu,Zhangying Ye

DOI: https://doi.org/10.1016/j.compositesa.2022.106916

2022-01-01

Abstract:Adsorption is an effective approach for elimination of phosphorus from wastewater. Nevertheless, the environmental impact of adsorbent materials, the difficulty of recycling, and unsatisfactory utilization efficiency for disused adsorbents are still the limitations of adsorbent development and utilization. Herein, a novel polysaccharide-based composite hydrogel (HBPEC/SA/lignin hydrogel) containing 2-hydroxy-3-butoxypropyl hydroxyethyl cellulose (HBPEC), sodium alginate (SA) and lignin, designed for phosphorus and enhanced Cu2+ removal. The adsorption was pH dependent and was not affected significantly by co-existing anions (Cl- NO3 - and SO42-) except HCO3 (-). Interestingly, the captured phosphorus facilitated the adsorption of Cu2+, the Cu2+ adsorption capability increased from 10.49 to 14.51 mg Cu/g by P-loaded adsorbent compared with adsorbent without P loaded. Particularly, the adsorbent achieved quick desorption due to its thermoresponsive. The shrunken hydrogel could be desorbed with only small amount of eluent and showed relatively high desorption efficiency. Altogether, HBPEC/SA/lignin hydrogel exhibited appealing application prospects in wastewater treatment.
Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Xiaochang Lin,Yinglong Xie,Huijie Lu,Yicong Xin,Rubina Altaf,Songming Zhu,Dezhao Liu

DOI: https://doi.org/10.1016/j.cej.2020.127530

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Phosphate (P) is an irreplaceable resource for the growth of all living organisms, and the impending exhaustion of minable P rock arouses the demand of P recovery, which further promotes the novel technologies development. To reclaim the P from wastewater or sludge conveniently and efficiently, a novel magnetic adsorbent with La-Zr bimetallic modification (La-Zr@Fe3O4) possessing a high affinity to phosphate and rapid separation was proposed in this study. Adsorption tests showed that the adsorption capacity of P on La-Zr@Fe3O4 increased with La content, reaching the maximum value of 49.3 mg/g at pH 3 by L1Z2. Whereas, the addition of La resulted in the decline of desorption efficiency from -85% to -60% in the pH range from 3 to 6, except pH 2. The kinetics of P adsorption on the La-Zr@Fe3O4 was described well by the pseudo-second-order model, while the isotherm of P adsorption was fitted well by the Freundlich model. Besides, the adsorbent exhibited high selectivity towards P over other coexisting ions (Cl- , NO3? , SO4 2?, Mg2+, and Ca2+). The feasibility of P recovery from the solid phase was investigated and confirmed by P recovery from fish farm sludge. The 90% removal efficiency of P and 88% desorption efficiency in cyclic adsorption/desorption experiments evidenced the stability and reusability of La-Zr magnetic adsorbent. The analysis of X-ray diffraction, Fourier transform infrared spectrum, and X-ray photoelectron spectroscopy revealed the replacement of OH? with phosphate via the ligand exchange was the adsorption mechanism. This work demonstrated that the highly efficient, rapidly separable, and repeatable LaZr@Fe3O4 has the potential for phosphate sequestration and recovery.
Lanthanum-doped chitosan-based polyacrylamide double network hydrogels for adsorption of phosphorus from wastewater

Jiaxin Duan,Xiao Zhang,Yun Wei

DOI: https://doi.org/10.1007/s11356-024-34350-2

IF: 5.8

2024-07-14

Environmental Science and Pollution Research

Abstract:Excessive phosphorus in aqueous solutions can cause eutrophication, which can harm aquatic organisms and pose a risk to the safety of drinking water for humans. The Chitosan/Polyacrylamide/Lanthanum (CS/PAM/La) hydrogel was designed to get rid of phosphate from aqueous solutions. La (III) was used to enhance the capacity of adsorption of CS. Polyacrylamide was used to enhance the mechanical properties of CS. The results showed that the adsorption capacity of CS/PAM/La hydrogel for phosphate was increased compared with that of CS. When pH of 5.0, the adsorption capacity was 80.07 mg-P/g. In addition, after five adsorption and desorption cycles, the adsorption efficiency remained above 90%. The mechanism of phosphate adsorption on CS/PAM/La material was analyzed using a mass transfer factor model (MTF) and the possible structure of CS/PAM/La hydrogel was calculated by density functional theory calculation (DFT). The application of CS/PAM/La composite hydrogel for removal of phosphate from actual wastewater was investigated, and the results met the requirement of national standard.

environmental sciences
Emulsion synthesis of cellulose/lanthanum alginate /La (III) composite microspheres for efficient and selective adsorption of phosphate

Jiale Wu,Yun Zhong,Chen Hao,Junjie Chen,Hongqiang Gao,Shiqi Han,Yutang Shen,Xiaohong Wang

DOI: https://doi.org/10.1016/j.cej.2024.150949

IF: 15.1

2024-04-07

Chemical Engineering Journal

Abstract:Phosphorus exceeding the standard will destroy the ecological environment of the freshwater resources and endanger the survival of aquatic animals. Due to the intrinsic complexation between La(III) and alginate, in this study, lanthanum hydroxide was first prepared from lanthanum nitrate, the chemical crosslinking agent was replaced by La(III), and cellulose/lanthanum alginate/La(OH) 3 composite microspheres (CSPGs-La) were synthesized using polyethyleneimine (PEI) as a crosslinking agent through the emulsification process in one pot. In comparison, the adsorption capacity of 80 mg L −1 PO 4 3− treated with CSPGs-La, CSPGs-Ech (Samples where the chemical crosslinking agent was not replaced by La(III)) and La(OH) 3 was 159.5 mg g −1 , 57.51 mg g −1 and 137.4 mg g −1 , respectively. CSPGs-La has good swelling performance, unique three-dimensional structure and mass transfer efficiency, which are the important reasons for its strong ability to capture phosphate. In the presence of coexisting anions, CSPGs-La can still accurately adsorb PO 4 3− , showing good adsorption selectivity. Intra-surface spherical complexation and electrostatic adsorption play an important role. When the dose of CSPGs-La is 1.35 g L −1 , the phosphorus pollutants in the actual domestic sewage can be reduced to 10 μg L −1 below. After five adsorption cycles, the retention rate of phosphorus removal performance is 87.7 %. This study provides a green, easy to implement, and promising solution for the preparation of efficient and selective phosphorus removal adsorbent.

engineering, chemical, environmental
Selective removal and recovery of La(III) using a phosphonic-based ion imprinted polymer: Adsorption performance, regeneration, and mechanism

Chenquan Ni,Qiming Liu,Zhong Ren,Huiqin Hu,Baihe Sun,Chang Liu,Penghui Shao,Liming Yang,Spyros G. Pavlostathis,Xubiao Luo

DOI: https://doi.org/10.1016/j.jece.2021.106701

IF: 7.7

2021-12-01

Journal of Environmental Chemical Engineering

Abstract:It is significant and difficult to selective removal and recovery rare earth elements in wastewater. A novel La(III) imprinted polymer (La-IIP) was synthesized by taking advantage of the strong interaction between Lanthanum and phosphorus combined the adsorption selectively of ion imprinted technology. The adsorption capacity of La-IIP is 62.8 mg g–1 and the selectivity coefficient kLa/Cu is 54.57. La-IIP can reach adsorption equilibrium within 0.5 h, the adsorption process was well revealed by the Intra-particle diffusion model. The regeneration properties (desorption rate, extent, and recycle times) of La-IIP were investigated. About 88% of the adsorbed La(III) was desorbed in the first 10 min. The high desorption rate was further confirmed in a fixed-bed column experiment. More significantly, the removal efficiency of the La-IIP remained about 100% after five regeneration cycles. Results of FT-IR, XPS, and DFT calculation indicated that the La(III) adsorption by La-IIP involves the reaction between La and O in the phosphonic group. This study not only demonstrated a high adsorption capacity, acid-stable, quick-desorption, and reusable adsorbent for La(III) recovery, but also developed a more comprehensive strategy for the design and testing of adsorbents with practical application prospects.

engineering, chemical, environmental
Antioxidant activity of synthetic diarylamines: a mitochondrial and cellular approach.

Diana Pinto-Basto,J. Silva,M. R. P. Queiroz,A. Moreno,O. Coutinho

DOI: https://doi.org/10.1016/j.mito.2008.10.001

2009-02-01

Abstract:
Lanthanum-based adsorbents for phosphate reutilization: Interference factors, adsorbent regeneration, and research gaps

Jing Li,Bing Li,Wei Yu,Haiming Huang,Jing-Cheng Han,Yuefei Huang,Xiaofeng Wu,Brent Young,Guangqian Wang

DOI: https://doi.org/10.1016/j.horiz.2022.100011

2022-01-01

Sustainable Horizons

Abstract:Because of its Lewis acid property that can bind phosphate even at trace levels, Lanthanum (La) shows great potential for phosphorus (P) removal and recovery. Although many studies have reported the synthesis of novel La-based adsorbents with strong adsorption capacities, there is insufficient knowledge of reaction mechanisms, interfering factors, and application obstacles for different La-based adsorbents under varying water/wastewater compositions. To evaluate the potential and barriers for using La-based adsorbents for P recovery, this paper presents an analysis of various La-based adsorbents and factors that may affect their effectiveness during practical application. The conclusions show that the performance of a La-based adsorbent is closely related to its structure and effective La content. The toxicity of free La3+ after adsorption and the adsorbent's regeneration performance are key factors dominating its applicability. Extra suggestions to adsorbent design for enhanced P adsorption capacity, regeneration performance, and selectivity are recommended for future research.
Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal

Yalin He,Xingyue Qi,Jialong Li,Wendi Wang,Jingyu Zhang,Lanhao Yang,Mei Xue,Kun Lan

DOI: https://doi.org/10.1021/acsomega.4c03501

IF: 4.1

2024-07-02

ACS Omega

Abstract:In pursuit of accessing clean water, the phosphate removal is of great importance for preventing eutrophication toward sustainable ecology. However, effective adsorbents with high capacity, selectivity, and long-term stability for treating phosphate in water still remain desired, which requires further development. Herein, a type of porous La-based adsorbents, which are composed of highly dispersed La(OH)3 on amino-functionalized Caragana korshinskii (CK) nanowires, are designed and fabricated through simple amination and decoration of lemon bars. Specifically, the adsorption to phosphate can be quickly completed within 50 min, and an ultrahigh adsorption capacity of 173.3 mg of P g-1 is realized. Moreover, these composite adsorbents display excellent selectivity and anti-interference ability to phosphate in the presence of common anions (CO3 2-, NO3-, Cl-, and SO4 2-). After four regenerations, there is still a removal rate of 85%. This study underscores an integrated material model for designing advanced structures toward efficient wastewater treatment.
Nanoscale Lanthanum Carbonate Hybridized with Polyacrylic Resin for Enhanced Phosphate Removal from Secondary Effluent

Yue Sun,Xinlei Feng,Weisheng Zheng

DOI: https://doi.org/10.1021/acs.jced.0c00352

2020-08-21

Abstract:The removal of phosphate from water has attracted increasing attention because of the dominant role of phosphate in eutrophication. In this study, a novel nanoscale hybridized adsorbent, , was fabricated by immobilizing nanosized lanthanum carbonate (NLC) into the pores of the macro-porous polyacrylic anion exchanger D213 through an in-situ precipitation method for phosphate adsorption from wastewater. exhibited excellent pH tolerance and possessed a high selectivity for phosphate in the presence of competing anions (Cl–, NO3–, SO42–, SiO32–, and HCO32–) and organic acids (humic, tannic, and gallic acids). The maximum phosphate adsorption capacity reached 53.64 mg P/g at 30 °C. Moreover, fixed-bed column adsorption experiments demonstrated that could effectively treat 2400 bed volumes of real secondary effluent (phosphate concentration decreased from 2.0 to <0.5 mg P/L). The exhausted could be regenerated easily using a binary solution of NaCl (1.5 mol/L)–Na2CO3 (3 mol/L), and no significant capacity loss was observed during the recycling for column adsorption–desorption. The underlying mechanism of phosphate adsorption was investigated by a combination of Fourier-transform infrared, transmission electron microscopy, and X-ray photoelectron spectroscopy, and the formation of LaPO4·xH2O was suggested to be the main pathway in the separation process of phosphate from real secondary effluent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jced.0c00352?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jced.0c00352</a>.Effect of lanthanum chloride concentration on phosphate adsorption; chemical structure of D213 and D201; SEM images of D213 and ; XPS analysis of ; FTIR spectra of D213, , and after P adsorption; phosphate species distribution versus pH; adsorption isotherm of phosphate by ; La dissolution from ; XRD diffractograms; TEM image of after P saturation; Langmuir and Freundlich model isotherm parameters of phosphate adsorption onto ; comparison of phosphate adsorption capacity for different La-based materials; and thermodynamic parameters of sorption for phosphate (<a class="ext-link" href="/doi/suppl/10.1021/acs.jced.0c00352/suppl_file/je0c00352_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

engineering, chemical,thermodynamics,chemistry, multidisciplinary
Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Xiuling Li,Hanyu Liang,Yanling Mo,Yansong Wei

DOI: https://doi.org/10.3390/pr10091761

IF: 3.5

2022-09-03

Processes

Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

engineering, chemical
Sustainable lanthanum-attapulgite/alginate hydrogels with enhanced mechanical strength for selective phosphate scavenging

Shuai Liu,Fuqiang Fan,Zhaokui Ni,Jun Liu,Shengrui Wang

DOI: https://doi.org/10.1016/j.jclepro.2022.135649

IF: 11.1

2022-12-25

Journal of Cleaner Production

Abstract:Attapulgite has rarely been used in lanthanum-based alginate hydrogel development for phosphate elimination. The associated research gaps regarding green fabrication, eco-friendly application, and mechanical strength improvement are worthy of systematic investigation. Herein, a newly designed lanthanum-crosslinked attapulgite/sodium alginate (La-ATP/SA) hydrogel adsorbent was prepared by an eco-friendly facile cross-linking method. The results showed that the introduction of attapulgite into sodium alginate enhanced the mechanical strength of La-ATP/SA beads. SEM images, TG tests, and stability assessment tests further verified the reinforced structure. Batch experiments demonstrated that the adsorption information was better described by the Freundlich isotherm equation and the pseudo-second-order kinetic model, harvesting more than 50% phosphate removal of the total amount within 120 min, proving that chemical adsorption dominated the sorption process. The maximum phosphate sorption capacity was 24.57 mg/g and stable phosphate removal was obtained in the presence of the commonly existing anions. The adsorption behavior was pH-dependent and efficient phosphate uptake was maintained over a wide pH range (3–9). The dominant mechanism for phosphate removal of La-ATP/SA was the inner-sphere complex mechanism. Small spherical macromolecular hydrogels can be easily recollected and display good reusability after five cycles. The results of this study demonstrate that the La-ATP/SA hydrogel is a promising sustainable candidate for phosphate control.

environmental sciences,green & sustainable science & technology,engineering, environmental
Soluble HLA-G molecules are increased in lymphoproliferative disorders.

Y. Sebti,G. Le Friec,C. Pangault,F. Gros,B. Drénou,V. Guilloux,M. Bernard,T. Lamy,R. Fauchet,L. Amiot

DOI: https://doi.org/10.1016/J.HUMIMM.2003.08.345

IF: 2.211

2003-11-01

Human Immunology

Abstract:
Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater

Xiao Zhang,Zhiyue Li,Taoyi Zhang,Jing Chen,Wenxi Ji,Yun Wei

DOI: https://doi.org/10.1007/s11356-022-23072-y

IF: 5.8

2022-10-11

Environmental Science and Pollution Research

Abstract:A low-cost and environmental-friendly sodium alginate-melamine@zeolitic imidazolate framework-67 (SA-ME@ZIF-67) adsorbent was fabricated by chemical grafting and in situ growth for the removal of lead ions in wastewater. Firstly, melamine (ME) was grafted onto sodium alginate (SA) by amide reaction, and then SA-ME was dropped into a solution of calcium chloride to form hydrogel bead, and ZIF-67 was grown on the SA-ME hydrogel bead by the in situ growth method. The SA-ME@ZIF-67 adsorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The SA-ME@ZIF-67 adsorbent was used to effectively adsorb Pb(II) from aqueous solutions. The initial concentrations of lead ions, adsorbent dose, initial pH of lead ion solution, temperature, and adsorption time for the material were optimized. The adsorption isotherms and kinetics fitted to Langmuir isotherm model ( R 2 = 0.9281, 0.9420, and 0.9623 at the temperatures of 288.15 K, 298.15 K, and 308.15 K, respectively) and pseudo-second-order kinetic model ( R 2 = 0.9901) respectively. According to the Langmuir model at 308.15 K, the maximum adsorption capacity of the adsorbent for Pb(II) was 634.99 mg/g. The recycling application of the adsorbent was possible as it was easily collected and reused after five adsorption-regeneration cycles. In addition, the Pb(II) in real wastewater samples has been efficiently removed using the fabricated hydrogel. The results showed that the SA-ME@ZIF-67 adsorbent had high adsorption capacity, removal efficiency, and easy recyclability for Pb(II).

environmental sciences
Enhanced phosphate removal from aqueous environments using three-dimensional La-doped carboxylic carbon nanotubes/alginate: Performance and mechanisms

Shenghao Zhang,Mingyang Li,Hao Zhang,Fuqiang Fan,Chunyang Zhou,Kangwen Lao,Xiangpeng Gao

DOI: https://doi.org/10.1016/j.ijbiomac.2024.136117

Abstract:The excessive amounts of phosphorus (P) discharged and usage have caused eutrophication and algal blooms, which seriously jeopardize the environment even the human health. In this study, carbon nanotubes (CNTs) served as carriers to develop a lanthanum-based sodium alginate hydrogel (La-CNT-COOH/SA) aimed at efficiently removing phosphate from wastewater. Characterization results confirmed successful deposition of La(OH)3 nanoparticles onto CNT-COOH. The optimal adsorption efficiency of La-CNT-COOH/SA hydrogels occurred at pH 4, with a maximum adsorption capacity of 54.4 mg/g under an initial phosphate concentration of 60 mg/L. Batch experiments demonstrated that La-CNT-COOH/SA performed well across a favorable pH range and exhibited high tolerance to common coexisting ions during phosphate adsorption. Adsorption isotherms indicated a dominance of both physical and chemical mechanisms in phosphate removal by La-CNT-COOH/SA. At elevated phosphate concentrations, the adsorption process followed quasi-second-order kinetics, primarily driven by chemical adsorption. Multi-instrument characterization emphasized that the substantial loading of La(OH)3 on CNT-COOH significantly contributed to adsorption, alongside crosslinked lanthanum ions on sodium alginate and abundant hydroxyl groups. Mechanisms of adsorption by La-CNT-COOH/SA encompassed electrostatic interactions, surface precipitation, and in-sphere complexation (La-O-P). These findings on fabrication, properties, and adsorption mechanisms of the phosphate-removal hydrogel lay a theoretical foundation for applying biomass-based materials in large-scale remediation practices.
Preparation and adsorption study of polyvinyl alcohol-functionalized sodium alginate composite hydrogel for Pb(II) in aqueous solutions

Huiling Zhang,Ziyan Ye,Junjie Liang,Zekang Hu,Hongyu Liu

DOI: https://doi.org/10.5004/dwt.2023.30072

IF: 1.1

2023-01-01

Desalination and Water Treatment

Abstract:This paper presents the utilization of sodium alginate (SA) as a raw material to construct a double network structure through the incorporation of chitosan (CS) and the electrostatic polymerization of SA. Subsequently, by employing polyvinyl alcohol (PVA) as a functional material, a modified SA/CS/PVA composite hydrogel (SCPH) was prepared via the Ca(II) ion exchange method. The hydro-gel exhibited a flocculent form, thereby greatly enhancing the removal of Pb(II). The adsorption process of Pb(II) by the SCPH reached equilibrium within 30 min, achieving a remarkable removal rate of 97.45% and a maximum adsorption capacity of 147.93 mg/g (298 K). A series of characterization analyses have been employed to investigate the structure and adsorption mechanism of hydrogels, and the adsorption mechanism involves ion exchange, electrostatic attraction, as well as the complexation of hydroxyl and carboxyl groups. Batch adsorption experiments were conducted at different temperatures and pH levels, and the kinetics and isotherms were investigated. The Langmuir isotherm and pseudo-second-order kinetic model were found to best fit the experimental data, suggesting the feasibility of using the SCPH as an efficient adsorbent for Pb(II) removal. Moreover, the dual network structure constructed by SA and CS significantly enhances the adsorption performance of SCPH. At the same time, PVA strengthens the mechanical strength of SCPH, which is favorable for recycling. As a low-cost and efficient adsorbent, SCPH can be widely used in water treatment.

engineering, chemical,water resources
Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

Guangyu Duan,Chunjie Zhou,Xiaoya Li,Zhanfang Cao,Feipeng Jiao,Hong Zhong,Xin Ma,Shuai Wang

DOI: https://doi.org/10.1007/s10924-024-03463-7

IF: 4.705

2024-12-06

Journal of Polymers and the Environment

Abstract:Typically, traditional rare earth element (REE) extraction processes generate industrial effluents rich in REEs, resulting in significant resource waste and environmental pollution. Hence, there are important practical applications for the preparation of adsorbents with high adsorption efficiency and superior stability for the recovery of REEs. In this work, a poly(6-(N-acetyl-acryloylamino) hexyl hydroxamic acid) (PAAHA) chelating resin was successfully prepared by grafting 6-acetyl amino hexyl hydroxamic acid onto polyacrylic resin (D113). The PAAHA chelating resin was utilized for the removal of La3+, Ce3+, and Y3+, and the maximum uptake capacities determined from the batch adsorption experiments were 2.10, 2.38, and 3.98 mmol/g, respectively, which were 3.09, 3.05, and 9.05 times greater than those of the D113 resin. The results demonstrated that the adsorption process was consistent with the pseudo-second-order kinetic and Langmuir isotherm models, suggesting that monolayer chemisorption was the dominant process. Concurrently, five successive adsorption‒desorption cycles revealed that the PAAHA chelating resin displayed remarkable reproducibility and stability. Notably, the –CONHOH group exhibited a marked affinity for REEs, resulting in the formation of stable five-membered rings via mechanism characterization. In summary, this resin represents a novel strategy for designing adsorbents and shows considerable promise for the remediation of mining tailings containing REEs.

engineering, environmental,polymer science
Optimization of the adsorption performance of herbal residues as lanthanide ion-modified carriers for phosphate by fly ash and its application

Caigao Zhou,Zihan Chen,Guochun Lv,Changlian Xu,Guiyin Wang,Shirong Zhang,Zhanbiao Yang,Zhang Cheng,Junzhuo Cai,Ting Li,Yulin Pu,Zhien Pu,Xin Qi,Guangli Xiao,Xiaoxun Xu

DOI: https://doi.org/10.1016/j.chemosphere.2023.140704

IF: 8.8

2023-11-28

Chemosphere

Abstract:In order to mitigate the harmful effects of eutrophication in water bodies, the applications of lanthanum-modified materials for phosphate removal from wastewater have attracted much attention. Unlike conventional adsorbents, plant wastes usually have poor adsorption abilities and are difficult to be reused for desorption of phosphate due to their small pore sizes and ununiform loading of modified ions. In this paper, a composite adsorbent (LC-MM) was synthesized by hydrothermal treatment of waste traditional Chinese medical materials (MMs) with load of lanthanum carbonate and co-heating treatment with coal fly ash (CFA), which was applied to remove phosphate from water. The results showed that maximum adsorption capacity of LC-MM was 52 mg g −1 , and the LC-MM showed appreciable adsorption capacity of phosphate for agricultural wastewater in the presence of complex interfering ions and for urban surface waters with low phosphate concentrations. Five adsorption-desorption cycles showed good reusability. The mechanism study showed that the La 3+ ions were more uniformly distributed on the surface of the absorbents with the introduction of Fe 3+ , Al 3+ , Mg 2+ and Ca 2+ ions in CFA. The ligand exchange between phosphate and carbonate, the internal spherical complexation formed by lanthanum ion and phosphate, and surface chemical precipitation attachment are the main reasons why the adsorption capacity of LC-MM approached or even surpassed that of conventional lanthanum-modified adsorbents. In conclusions, this work proposed an effective method for the modification of plant materials.

environmental sciences

Regulation of pyruvate metabolism in metabolic-related diseases

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Fabrication of sodium alginate-doped carbon dot composite hydrogel and its application for La (III) adsorption and enhanced the removal of phosphorus

Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Facile preparation of dual La-Zr modified magnetite adsorbents for efficient and selective phosphorus recovery

Lanthanum-doped chitosan-based polyacrylamide double network hydrogels for adsorption of phosphorus from wastewater

Emulsion synthesis of cellulose/lanthanum alginate /La (III) composite microspheres for efficient and selective adsorption of phosphate

Selective removal and recovery of La(III) using a phosphonic-based ion imprinted polymer: Adsorption performance, regeneration, and mechanism

Antioxidant activity of synthetic diarylamines: a mitochondrial and cellular approach.

Lanthanum-based adsorbents for phosphate reutilization: Interference factors, adsorbent regeneration, and research gaps

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal

Nanoscale Lanthanum Carbonate Hybridized with Polyacrylic Resin for Enhanced Phosphate Removal from Secondary Effluent

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Sustainable lanthanum-attapulgite/alginate hydrogels with enhanced mechanical strength for selective phosphate scavenging

Soluble HLA-G molecules are increased in lymphoproliferative disorders.

Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater

Enhanced phosphate removal from aqueous environments using three-dimensional La-doped carboxylic carbon nanotubes/alginate: Performance and mechanisms

Preparation and adsorption study of polyvinyl alcohol-functionalized sodium alginate composite hydrogel for Pb(II) in aqueous solutions

Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

Optimization of the adsorption performance of herbal residues as lanthanide ion-modified carriers for phosphate by fly ash and its application