Soluble HLA-G molecules are increased in lymphoproliferative disorders.

Y. Sebti,G. Le Friec,C. Pangault,F. Gros,B. Drénou,V. Guilloux,M. Bernard,T. Lamy,R. Fauchet,L. Amiot

DOI: https://doi.org/10.1016/J.HUMIMM.2003.08.345

IF: 2.211

2003-11-01

Human Immunology

Abstract:

What problem does this paper attempt to address?

The SCOOP Concurrency Model in Java-like Languages

F. Torshizi,J. Ostroff,R. Paige,M. Chechik

DOI: https://doi.org/10.3233/978-1-60750-065-0-7

Abstract:SCOOP is a minimal extension to the sequential object-oriented programming model for concurrency. The extension consists of one keyword (separate) that avoids explicit thread declarations, synchronized blocks, explicit waits, and eliminates data races and atomicity violations by construction, through a set of compiler rules. SCOOP was originally described for the Eiffel programming language. This paper makes two contributions. Firstly, it presents a design pattern for SCOOP, which makes it feasible to transfer SCOOP’s concepts to different object-oriented programming languages. Secondly, it demonstrates the generality of the SCOOP model by presenting an implementation of the SCOOP design pattern for Java. Additionally, we describe tools that support the SCOOP design pattern, and give a concrete example of its use in Java.
3D-agaric like core-shell architecture UiO-66-NH2@ZIF-8 with robust stability for highly efficient REEs recovery

Mengmeng Zhang,Kun Yang,Junshuo Cui,Haibiao Yu,Yuejiao Wang,Weijun Shan,Zhenning Lou,Ying Xiong

DOI: https://doi.org/10.1016/j.cej.2020.124023

IF: 15.1

2020-04-01

Chemical Engineering Journal

Abstract:With the ever-increasing of Rare Earth Elements (REEs) in various high technology applications, efficient recovery of REEs from liquid sources is becoming significantly important. In this work, ZIF-8 and UiO-66-NH2 (U6N) are combined to form a 3D-agaric like core-shell structure hybrid material (), which exhibits good performance in REEs extraction. Due to the abundant adsorption sites of ZIF-8 and the excellent water stability of UiO-66-NH2, 3D-agaric like showed quick adsorption rate (only 10 min to reach equilibrium), high adsorption capacity and selectivity for REEs from water compared to other reported adsorbents. Maximum adsorption capacities of for neodymium (Nd(III)), europium (Eu(III)), gadolinium (Gd(III)) and erbium (Er(III)) achieved to 249.90, 295.28, 316.22 and 340.95 mg g-1, respectively. has superiority in selective adsorption of REEs from Cd(II), Zn(II), Cu(II), Mn(II) and Co(II) coexistence solution. The order of adsorption capacities for REEs is in agreement with the order of their electronegativity, ionic radius and charge density. Moreover, showed better water stability and recyclability than single MOF. Overall, hybrid material has efficiency in REEs separation from solutions, and has great advantage in the application of wastewater treating.

engineering, chemical, environmental
Comparing Asynchronous and Synchronous Parallelization of the SMS-EMOA

Simon Wessing,G. Rudolph,Dino A. Menges

DOI: https://doi.org/10.1007/978-3-319-45823-6_52

2016-09-17

Abstract:
Novel phosphate functionalized sodium alginate hydrogel for efficient adsorption and separation of Nd and Dy from Co

Yilai Zhong,Shunyan Ning,Kun Wu,Zengyuan Li,Xinpeng Wang,Chunlin He,Toyohisa Fujita,Ji Wang,Lifeng Chen,Xiangbiao Yin,Mohammed F. Hamza,Yuezhou Wei

DOI: https://doi.org/10.1016/j.jenvman.2024.120283

IF: 8.7

2024-02-09

Journal of Environmental Management

Abstract:The recovery of rare earth elements (REEs) including neodymium (Nd) and dysprosium (Dy) from NdFeB permanent magnets has become one of the main ways to solve the increased demand for rare earth. Herein, n-dodecyl phosphate (DPPA) was used for the first time as the adsorption functional group donor, sodium alginate as the substrate, and calcium chloride solution as the reactive solvent, a hybrid hydrogel adsorbent DPPA/CaALG was synthesized by sol-gel method for application in the adsorption and separation of Nd and Dy from the Co-Nd-Dy ternary system. SEM-EDS, and N 2 adsorption-desorption analysis showed the successful preparation of DDPA/CaALG with mesoporous structure. Batch experiments showed the superiority of the hybrid hydrogel for the good selective adsorption of Nd and Dy, such as large adsorption capacity (Nd: 162.5 mg/g, Dy: 183.5 mg/g), and no adsorption for Co. FT-IR, XPS showed that PO and P–O groups are involved in the adsorption process of Nd and Dy as electron acceptors, where the ion exchange of P–OH is dominant. Furthermore, the chemical properties of ligands and complexes were analyzed by Density Functional Theory (DFT) calculations and revealed their adsorption behaviors as well as the competition between different metal ions.

environmental sciences
Improved recovery selectivity of rare earth elements from mining wastewater utilizing phytosynthesized iron nanoparticles

Yalin Yang,Qiuting Yan,Xiulan Weng,Gary Owens,Zuliang Chen

DOI: https://doi.org/10.1016/j.watres.2023.120486

2023-10-01

Abstract:While rare earth elements (REEs) play key roles in many modern technologies, the selectivity of recovering of REEs from mining wastewater remains a critical problem. In this study, iron nanoparticles (FeNPs) synthesized from euphorbia cochinchinensis extracts were successfully used for selective recovery of REEs from real mining wastewater with removal efficiencies of 89.4% for Y(III), 79.8% for Ce(III) and only 6.15% for Zn(Ⅱ). FTIR and XPS analysis suggested that the high selective removal efficiency of Y(III) and Ce(III) relative to Zn(Ⅱ) on FeNPs was due to a combination of selective REEs adsorption via complexing with O or N, ion exchange with H+ present in functional groups contained within the capping layer and electrostatic interactions. Adsorptions of Y(III) and Ce(III) on FeNPs conformed to pseudo second-order kinetics and the Langmuir isotherm model with maximum adsorption capacities of 5.10 and 0.695 mg∙g-1, respectively. The desorption efficiencies of Y(III) and Ce(III) were, respectively, 95.0 and 97.9% in 0.05 M acetic acid, where desorption involved competitive ion exchange between Y(III), Ce(III) and Zn(Ⅱ) with H+ contained in acetic acid and intraparticle diffusion. After four consecutive adsorption-desorption cycles, adsorption efficiencies for Y(III) and Ce(III) remained relatively high at 52.7% and 50.1%, respectively, while desorption efficiencies of Y(III) and Ce(III) were > 80.0% and 95.0%, respectively. Overall, excellent reusability suggests that FeNPs can practically serve as a potential high-quality selectivity material for recovering REEs from mining wastewaters.
Mechanistic insights into the adsorption and extraction of rare earth ions using oxygen- and phosphorus-doped porous graphitic carbon nitride

Yiping Feng,Pingping Chen,Xingye Lian,Chenyi He,Chaoyu Zheng,Haijian Lu,Longyong Lin,Guoguang Liu,Yirong Deng

DOI: https://doi.org/10.1016/j.jece.2024.112055

IF: 7.7

2024-02-09

Journal of Environmental Chemical Engineering

Abstract:Addressing the challenge of removing rare earth elements (REEs) from wastewater generated during mineral processing, this study successfully synthesized oxygen- and phosphorus-doped graphitic carbon nitride (OP-CN) and evaluated its capability to adsorb REEs from synthetic solutions containing La(III), Ce(III), Gd(III), and Yb(III). Characterization results indicated that OP-CN, being more porous than CN, has a larger specific surface area and greater pore volume, along with oxygen and phosphorus functional groups, which are advantageous for REEs adsorption. The maximum adsorption capacities of OP-CN for the target REEs achieved ranging from 76.2 to 111.7 mg g − 1 at 25 °C and a pH of 5.0. Thermodynamic analysis showed that the adsorption processes between OP-CN and REEs are favorable, spontaneous, and exothermic. Through characterization and computational chemistry analysis, identified pore filling, ion exchange, surface complexation, and potent electrostatic attraction as crucial for the efficient adsorption of REEs. The adsorption was found to be optimal within a pH range of 3.0 to 7.0 and was minimally influenced by common anions and cations in the solution. Notably, OP-CN maintained high adsorption efficiencies across various natural water matrices and proved to be effective over five usage cycles. The integration of N, O, and P active sites, along with the negative charges on OP-CN, offers a promising approach for the efficient separation and recovery of REEs from waste streams.

engineering, chemical, environmental
Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

Chunlin He,Khalid A.M. Salih,Yuezhou Wei,Hamed Mira,Adel A.-H. Abdel-Rahman,Khalid Z. Elwakeel,Mohammed F. Hamza,Eric Guibal

DOI: https://doi.org/10.3390/met11020294

IF: 2.695

2021-02-08

Metals

Abstract:With the target of recovering rare earth elements (REEs) from acidic leachates, a new functionalized hydrogel was designed, based on the phosphorylation of algal/polyethyleneimine beads. The functionalization strongly increased the sorption efficiency of the raw material for Pr(III) and Tm(III). Diverse techniques were used for characterizing this new material and correlating the sorption performances and mechanisms to the physicochemical structure of the sorbent. First, the work characterized the sorption properties from synthetic solutions with the usual procedures (study of pH effect, uptake kinetics, sorption isotherms, metal desorption and sorbent recycling, and selectivity from multi-element solutions). Optimum pH was found close to 5; sorption isotherms were fitted by the Langmuir equation (maximum sorption capacities close to 2.14 mmol Pr g−1 and 1.57 mmol Tm g−1). Fast uptake kinetics were modeled by the pseudo-second order rate equation. The sorbent was highly selective for REEs against alkali-earth and base metals. The sorbent was remarkably stable for sorption and desorption operation (using 0.2 M HCl/0.5 M CaCl2 solutions). The sorbent was successfully applied to the leachates of Egyptian ore (pug leaching) after a series of pre-treatments (precipitation steps), sorption, and elution. The selective precipitation of REEs using oxalic acid allows for the recovery of a pure REE precipitate.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

Guangyu Duan,Chunjie Zhou,Xiaoya Li,Zhanfang Cao,Feipeng Jiao,Hong Zhong,Xin Ma,Shuai Wang

DOI: https://doi.org/10.1007/s10924-024-03463-7

IF: 4.705

2024-12-06

Journal of Polymers and the Environment

Abstract:Typically, traditional rare earth element (REE) extraction processes generate industrial effluents rich in REEs, resulting in significant resource waste and environmental pollution. Hence, there are important practical applications for the preparation of adsorbents with high adsorption efficiency and superior stability for the recovery of REEs. In this work, a poly(6-(N-acetyl-acryloylamino) hexyl hydroxamic acid) (PAAHA) chelating resin was successfully prepared by grafting 6-acetyl amino hexyl hydroxamic acid onto polyacrylic resin (D113). The PAAHA chelating resin was utilized for the removal of La3+, Ce3+, and Y3+, and the maximum uptake capacities determined from the batch adsorption experiments were 2.10, 2.38, and 3.98 mmol/g, respectively, which were 3.09, 3.05, and 9.05 times greater than those of the D113 resin. The results demonstrated that the adsorption process was consistent with the pseudo-second-order kinetic and Langmuir isotherm models, suggesting that monolayer chemisorption was the dominant process. Concurrently, five successive adsorption‒desorption cycles revealed that the PAAHA chelating resin displayed remarkable reproducibility and stability. Notably, the –CONHOH group exhibited a marked affinity for REEs, resulting in the formation of stable five-membered rings via mechanism characterization. In summary, this resin represents a novel strategy for designing adsorbents and shows considerable promise for the remediation of mining tailings containing REEs.

engineering, environmental,polymer science
Adsorption of rare earth ions from highly saline media by a pyridine-modified activated carbon sorbent

Tianci Zhang,Peihai Ju,Wenjing Yuan,Chenliang Zhou,Zhi Zheng,Jiaxuan Sun,Shaoyuan Shi

DOI: https://doi.org/10.1016/j.jece.2024.114438

IF: 7.7

2024-10-21

Journal of Environmental Chemical Engineering

Abstract:During the rare earth smelting and separation process, a substantial volume of high-salt wastewater is generated, within which residual low-concentration rare earth ions not only result in waste but also contribute to environmental pollution. In this work, a selective adsorbent used for the recovery of rare earth ions contained in high-salt solutions from the rare earth industry was designed and prepared by grafting pyridine (PY) onto activated carbon (AC) via the use of 3-aminopropyltriethoxysilane (KH550). The results showed that the prepared adsorbent, AC-NH 2 -PY, exhibited exceptional efficacy in extracting and segregating rare earth ions within high-salt solutions. The speciation of rare earth elements in a high-salt solution was simulated through Visual MINTEQ under different conditions. Adsorption performance assessments revealed that AC-NH 2 -PY achieved saturated adsorption capacities of 2.978 mg/g for La 3+ , 7.847 mg/g for Dy 3+ , and 9.527 mg/g for Yb 3+ . AC-NH 2 -PY could maintain a remarkable adsorption capacity for rare earth ions in salt solutions containing 5 % NaCl and in actual industrial wastewater; moreover, the adsorption capacity of the adsorbent remained greater than 80 % after five adsorption cycles.

engineering, chemical, environmental
Iron nanoparticles synthesized using Euphorbia cochinchinensis leaf extracts exhibited highly selective recovery of rare earth elements from mining wastewater: Exploring the origin of high selectivity

Xinmiao Xu,Xiulan Weng,Gary Owens,Zuliang Chen

DOI: https://doi.org/10.1016/j.jhazmat.2024.136320

IF: 13.6

2024-10-31

Journal of Hazardous Materials

Abstract:Iron nanoparticles synthesized using Euphorbia cochinchinensis leaf extracts (Ec-FeNPs) showed high selectivity for rare earth elements (REEs) recovery from mining wastewater. REEs recovery efficiencies were > 90 %, with distribution coefficients ranging from 2483.9 to 37500 mL/g, which were consistently much higher than non-REEs (15.0 - 234.8 mL/g). Moreover, even after 5 consecutive reuse cycles, Ec-FeNPs effectively adsorbed > 60 % of REEs. Application of advanced characterization techniques found that the high selectivity of Ec-FeNPs for REEs was mainly due to the biomolecules present in the Ec extract. During the synthesis of FeNPs, these biomolecules are modified on the surface of Ec-FeNPs, giving Ec-FeNPs an enhanced ability to separate REEs from non-REEs. The biomolecule capping layer, which is modified on the surface of Ec-FeNPs, constitutes a primary source of high selectivity. LC-MS identified amino acids, carbohydrates, and organic acids as the major biomolecule categories in the capping layer. Density functional theory (DFT) confirmed that the biomolecule capping layer of Ec-FeNPs had the strongest interaction with REEs; an association confirmed by Spearman's correlation analysis. The adsorption mechanism of REEs by Ec-FeNPs mainly involved a combination of ion exchange, electrostatic adsorption, and surface complexation. Overall, the novel findings reported here provide new perspectives for the design of absorbents with highly selective recovery of REEs from mining wastewater.

environmental sciences,engineering, environmental
Selective Separation of Rare Earth Ions from Mine Wastewater Using Synthetic Hematite Nanoparticles from Natural Pyrite

Chunxiao Zhao,Jun Wang,Baojun Yang,Yang Liu,Guanzhou Qiu

DOI: https://doi.org/10.3390/min14050464

IF: 2.5

2024-04-29

Minerals

Abstract:The separation of rare earth ions (RE3+) from aqueous solutions poses a significant challenge due to their similar chemical and physical characteristics. This study presents a method for synthesizing hematite nanoparticles (Fe2O3 NPs) through the high-temperature phase transition of natural pyrite for adsorbing RE3+ from mine wastewater. The characteristics of Fe2O3 NPs were studied using XRD, SEM, BET, XPS, FTIR, and Zeta potential. The optimal condition for RE3+ adsorption by Fe2O3 NPs was determined to be at pH 6.0 with an adsorption time of 60 min. The maximum adsorption capacities of Fe2O3 NPs for La3+, Ce3+, Pr3+, Nd3+, Sm3+, Gd3+, Dy3+, and Y3+ were 12.80, 14.02, 14.67, 15.52, 17.66, 19.16, 19.94, and 11.82 mg·g−1, respectively. The experimental data fitted well with the Langmuir isotherm and pseudo-second-order models, suggesting that the adsorption process was dominated by monolayer chemisorption. Thermodynamic analysis revealed the endothermic nature of the adsorption process. At room temperature, the adsorption of RE3+ in most cases (La3+, Ce3+, Pr3+, Nd3+, Sm3+, and Y3+) onto Fe2O3 NPs was non-spontaneous, except for the adsorption of Gd3+ and Dy3+, which was spontaneous. The higher separation selectivity of Fe2O3 NPs for Gd3+ and Dy3+ was confirmed by the separation factor. Moreover, Fe2O3 NPs exhibited excellent stability, with an RE3+ removal efficiency exceeding 94.70% after five adsorption–desorption cycles, demonstrating its potential for the recovery of RE3+ from mine wastewater.

geochemistry & geophysics,mineralogy,mining & mineral processing
What are the different biomolecules involved in the selective recovery of REEs from mining wastewater using FeNPs synthesized from two plant extracts?

Xinmiao Xu,Zhenjun Zhang,Xiulan Weng,Zuliang Chen

DOI: https://doi.org/10.1016/j.scitotenv.2024.174571

2024-10-01

Abstract:Extracting rare earth elements (REEs) from wastewater is crucial for saving the environment, sustainable use of natural resources and economic growth. Reported here is a simple, low cost and one-step synthesis of Fe nanoparticles (FeNPs) based on two plant extracts having the ability to recover REEs. The synthesis of FeNPs using Excoecaria cochinchinensis leaves extract (Ec-FeNPs) exhibited high selectivity for heavy rare earth due to unique biomolecules, achieving separation coefficients (Kd) of 3.16 × 103–4.04 × 106 mL/g and recovery efficiencies ranging from 71.7 to 100 %. Conversely, the synthesis of FeNPs using Pinus massoniana lamb extract (PML-FeNPs) revealed poorer REE recovery efficiencies of 7.2–86.7 %. To understand the differences between Ec-FeNPs and PML-FeNPs in terms of selectivity and efficiency, LC-QTOF-MS served to analyze the biomolecules differences of two plant extracts. In addition, various types of characterization were carried out to identify the different functional groups encapsulated on the surface of FeNPs. These results reveal the source of the difference in the selectivity of Ec-FeNPs and PML-FeNPs for REEs. Furthermore, during DFT calculations, it was found that biomolecules with varying affinities for the surface of FeNPs interact with each other, leading to the formation of structures that exhibit high reactivity towards REEs. Finally, incorporating Spearman correlation analysis demonstrates that the selective removal efficiency of REEs was closely linked to surface complexation, ion exchange, and electrostatic adsorption. Consequently, this work strongly highlights the potential for the practical application of novel adsorbents in this field.

environmental sciences
Selective and fast recovery of rare earth elements from industrial wastewater by porous β-cyclodextrin and magnetic β-cyclodextrin polymers

François Nkinahamira,Alaaeddin Alsbaiee,Qiaoting Zeng,Yan Li,Yiqing Zhang,Meiling Feng,Chang-Ping Yu,Qian Sun

DOI: https://doi.org/10.1016/j.watres.2020.115857

IF: 12.8

2020-08-01

Water Research

Abstract:Recovery of rare earth elements (REEs) from industrial wastewater has drawn great attention due to their potential environmental toxicity, as well as their high demand in modern technologies. In this study, we developed a magnetic composite based on the high surface area porous β-cyclodextrin polymer (P-CDP), namely 3O4. Both P-CDP and 3O4 rapidly sequester REEs such as Nd, Gd, Eu, and Gd, reaching equilibrium in less than 10 min and fitting the Langmuir isotherm model with maximum adsorption capacities ranging from 7.76 to 9.59 mg/g at 25 °C when the highest initial concentration was 100 mg/L. Besides, the recovery of these REEs was not affected by competitive alkali, alkaline earth, and transition metal ions in model studies and industrial wastewater, as revealed by the recovery efficiencies which ranged from 62% to 100% indicating an excellent selectivity on both adsorbents. In addition, both adsorbents can be fully regenerated under mildly acidic conditions for at least five cycles. Importantly, 3O4 can be easily isolated from the system by an external magnetic field which simplifies its synthesis and usability. It also overcomes the clogging and high backpressure issues of P-CDP, which facilitates its application for REEs recovery as compared with P-CDP. These characteristics demonstrate the promise of P-CDP and 3O4 for the pollution control and recovery of REEs.

environmental sciences,engineering, environmental,water resources
Phosphorylated porous phenolic resin for efficient extraction of low-concentration rare earth elements from tailing wastewater

Zhiqian Liu,Meng Rong,Yace Mi,Hui Cai,Liangrong Yang

DOI: https://doi.org/10.1016/j.seppur.2024.127502

IF: 8.6

2024-04-24

Separation and Purification Technology

Abstract:Efficient extraction and recycling of rare earth elements (REEs) from low-concentration complex tailing wastewater is critical to meeting the growing industrial demands and optimizing resource utilization. In this work, three phosphorylated porous phenolic resins (PO-PPRs) were prepared via the phosphorylation of phenolic hydroxyl groups with POCl 3 , and employed to extract REE 3+ from both simulated and practical low-concentration REE 3+ -containing aqueous solution. The PO-PPRs, characterized by hierarchical pore structures, exhibit high adsorption capacities for both light and heavy REE 3+ ions over a broad pH working range from 3.0 to 7.0, along with fast adsorption kinetics (<30 min). And the maximum adsorption capacities of PO-PPRs for Nd 3+ , Dy 3+ and Y 3+ were found to be 104.1, 118.0 and 63.9 mg/g, respectively. Furthermore, the introduction of phosphonic groups significantly improves the REE 3+ adsorption selectivity against various interfering metal ions such as Na + , K + , Ca 2+ , Mg 2+ , and Al 3+ . For instance, the Nd 3+ /Al 3+ separation factor (S.F.) of 24 exceeded that of most commercial resins and reported materials. In a simulated mixed multi-element aqueous solution system containing Nd 3+ , Dy 3+ , Y 3+ , Al 3+ , Ca 2+ , Mg 2+ , Mn 2+ , K + and Na + , PO-PPR-1 extracted 82.5% of total REE 3+ while maintaining Al 3+ adsorption efficiency of less than 13%. Moreover, the extraction efficiency of total REE 3+ for PO-PPR-1 in pretreated practical wastewater from ion-adsorbed ores tailing reached 99.6%. Additionally, PO-PPRs demonstrated easy regeneration and excellent recycling performance after 5 consecutive adsorption–desorption cycles, confirming their promising application potential in low-concentration REEs extraction.

engineering, chemical
Recovery of rare earth by electro-sorption with sodium diphenylamine sulfonate modified activated carbon electrode

Lei Wang,Yun Gao,Yujun Chai,Xiaoqi Sun

DOI: https://doi.org/10.1016/j.seppur.2022.121005

IF: 8.6

2022-07-01

Separation and Purification Technology

Abstract:Electro-sorption has been used for water purification and desalination, but little research on the recovery of rare earth element (REE) in aqueous solution. In this work, sodium diphenylamine sulfonate (SDAS) modified the activated carbon (AC) on carbon felt (CF) is used to recovery the La(III), Nd(III) and Ce(III) ions by electro-sorption. Moreover, this electrode can be refreshed under the reversal voltage without any other chemical reagent. After 500 minutes of reaction, the adsorption capacity of La(III) ions reaches nearly 600 mg g-1, which remains stable in three cycles. Due to the synergistic effect of chemical and physical absorption, the electro-sorption of La(III) ions on SDAS/AC-CF electrode follows Langmuir isotherm, the pseudo-first-order and pseudo-second-order models. Moreover, the adsorption capacities of Nd(III) and Ce(III) ions after nearly 180 minutes of reaction are 275 mg g-1 and 365 mg g-1, respectively. Herein, white flocculent La(OH)3, purple flake-type purple Nd(OH)3 and brownish yellow spherical CeO2 are obtained after electro-sorption. This method is simple without the pollution of other chemical reagents. Therefore, it has revealed potential application value in the recovery of REE from wastewater.

engineering, chemical
Recovery of rare earth elements from NdFeB magnet by mono- and bifunctional mesoporous silica: Waste recycling strategies and perspectives

Oksana Dudarko,Natalia Kobylinska,Vadim Kessler,Gulaim Seisenbaeva

DOI: https://doi.org/10.1016/j.hydromet.2022.105855

IF: 4.217

2022-04-01

Hydrometallurgy

Abstract:Rare earth elements (REEs) such as Nd3+ and Dy3+ were recovered from simulated and real leaching solution of the NdFeB magnet via solid pHase extraction (SPE). Extraction of REEs from simulated solutions was investigated using silica functionalized with NH2-, EDTA and/or phosphonic groups. The effects of several experimental factors (pH, efficiency of adsorbents, selectivity, and elution of metal ions) on extraction of REEs were investigated. Exploiting specific affinities of adsorbents toward REEs in the presence of competing ions, selective separation of REEs was achieved successfully. The affinity of phosphorous/nitrogen containing adsorbents had the descending order of adsorption: Fe3+ > Dy3+ > Nd3+ > Ni2+ > Al3+ for multi-component systems. In the first approach, a procedure based on precipitation of Fe3+ ions combined with SPE was evaluated for the recovery of REEs in two steps. Most of the Fe3+ ions (85%) were efficiently separated by adding an ammonia solution (pH ~ 2.5). Chemical analysis of precipitate showed, though, a high content of REEs. Extraction of REEs from supernatant liquid via bi-functional mesoporous silica with EDTA and/or phosphonic groups recovered ~97.0% of Nd3+ with Ni2+ and Al3+ ions as impurities. Non-ordered silica functionalized with phosphonic groups, showed economical superiority over other mesoporous adsorbents studied for REEs extraction. Complete recovery (97.8%) of REEs was achieved after several stages of SPE with adsorbents functionalized by P/N-containing groups. The in-advance removal of Fe3+ ions was a prerequisite for successful implementation of this approach. Finally, separation of Nd3+ and Dy3+ was performed from nitric acid media using the gradient elution to obtain 98.4% purity Nd3+. The proposed step-by-step SPE procedure by P/N-containing functionalized silica was successfully applied for extraction of REEs (95.5%) in an industrial magnet. This study opens up possibilities for application of the developed approach for the End-of-Life materials recycling.

metallurgy & metallurgical engineering
Rare Earth Metal Ions Adsorption Using 2-[2-Oxo-2-(1-pyrrolidinyl)ethoxy]acetic acid/Sodium Alginate Gel

Yiwen Wang,Aijun Gong,Lina Qiu,You Li,Yuzhen Bai,Yang Liu,Ge Gao,Weiyu Zhao,Jiayi Yin,Xinyu Huang,Yifan Chen

DOI: https://doi.org/10.1007/s10924-023-03169-2

IF: 4.705

2024-01-30

Journal of Polymers and the Environment

Abstract:In this research, adsorbents synthesized from natural sodium alginate polymers incorporated with varying concentrations of 2-[2-oxo-2-(1-pyrrolidinyl)ethoxy]acetic acid (PYRDGA) were investigated. Analyses of adsorption properties indicated that the pristine sodium alginate gel (SAG) demonstrated adsorption capacities of 222.4, 202.6, 199.1 and 398.0 mg g −1 for La, Gd, Y, and Sc, respectively. The composite gel infused with PYRDGA at a 1:1 ratio exhibited adsorption values of 278.2, 270.6, 283.2 and 374.9 mg g −1 for the same elements. Across all synthesized gels, an optimal pH of 5 was identified for the adsorption of rare earth element (REE) 3+ ions. The introduction of the extractant PYRDGA notably reduced the gel's selectivity towards Cu, Pb, Cd, and Cr. Spectroscopic analyses highlighted the critical involvement of C=O and C–O functional groups in the adsorption mechanisms. Kinetic assessments suggested the applicability of R–P model, inferring that the rare earth ions' adsorption onto the gels could be characterized by uniform or non-uniform monolayer surface adsorption. Furthermore, thermodynamic evaluations were conducted for various gels against REE 3+ ions at 298.15 K. Among the eluents analyzed, the most efficient recovery of REE 3+ was observed with 0.1 M HCl/CaCl 2。

engineering, environmental,polymer science
Highly efficient recovery of heavy rare earth elements by using an amino-functionalized magnetic graphene oxide with acid and base resistance

Shuangyou Bao,Yingjun Wang,Zongsu Wei,Weiwei Yang,Yongsheng Yu

DOI: https://doi.org/10.1016/j.jhazmat.2021.127370

IF: 13.6

2022-02-01

Journal of Hazardous Materials

Abstract:In the application of various magnetic materials for water treatment, control of surface resistance to acid and alkali corrosion remains largely overlooked, which could greatly extend their service life. We herein prepare amino grafted magnetic graphene oxide composites using a simple one-step cross-link reaction between the graphene oxide and magnetic Fe3O4/C nanoparticles. The as-prepared magnetic graphene oxide composites have long-term stability under acid and alkali solutions and shows an excellent performance in removing Ho(III), a representative rare earth element (REE) from water. The observed adsorption capacity of 72.1 mg Ho(III)/g exceeded that of most magnetic materials previously reported. Regeneration of the magnetic composites was realized in acid and alkali solutions but their structural integrity and physicochemical properties retained even after 18 adsorption-desorption cycles. The current adsorbent also shows excellent adsorption performance for other heavy REEs, such as Er(III), Eu(III), Lu(III), Tm(III), Y(III) and Yb(III). This work can provide a new strategy for constructing an acid and base resistance magnetic graphene oxide for the high-efficient recovery of heavy REEs from aqueous solution.

environmental sciences,engineering, environmental
Regulation of pyruvate metabolism in metabolic-related diseases

N. Jeoung,C. Harris,Robert A. Harris

DOI: https://doi.org/10.1007/s11154-013-9284-2

2014-03-01

Abstract:
Selective adsorption and high recovery of La3+ using graphene oxide/poly (N-isopropyl acrylamide-maleic acid) cryogel

Xinwei Yang,Dereje Kebebew Debeli,Guorong Shan,Pengju Pan

DOI: https://doi.org/10.1016/j.cej.2019.122335

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:The increasing use of rare earth elements (REEs) in a wide range of high-tech applications, leading to global ever-increasing demands, has stimulated the development of new technologies for REEs separation and recovery. Herein, an efficient porous graphene oxide/poly (N-isopropyl acrylamide-maleic acid) [GO/P(NIPAM-MA)] cryogel was synthesized by cryopolymerization and was employed as the REEs recovery adsorbent. The cryogel exhibits stable, microporous interpenetrating structure and thermosensitive characteristics. The adsorption follows the pseudo-second-kinetic model indicating that the adsorption process was controlled by the adsorption sites with the equilibrium adsorption capacity of La3+ was 33.1 mg/g. The Langmuir isotherm model fits the data better, revealing the homogenous adsorption for REEs on the surface of the adsorbent. Besides, the adsorbent displayed preferential adsorption of La3+ compared to Cu2+, Co2+, Ni2+, Nd3+, Yb3+ in a binary solution suggested the high level of La3+ separation efficiency that exceeded 95%. In general, the eco-friendly, sustainability and higher efficiency characteristics of GO/P(NIPAM-MA) cryogel provide a promising route for recycling rare earth elements from wastewater.

Soluble HLA-G molecules are increased in lymphoproliferative disorders.

The SCOOP Concurrency Model in Java-like Languages

3D-agaric like core-shell architecture UiO-66-NH2@ZIF-8 with robust stability for highly efficient REEs recovery

Comparing Asynchronous and Synchronous Parallelization of the SMS-EMOA

Novel phosphate functionalized sodium alginate hydrogel for efficient adsorption and separation of Nd and Dy from Co

Improved recovery selectivity of rare earth elements from mining wastewater utilizing phytosynthesized iron nanoparticles

Mechanistic insights into the adsorption and extraction of rare earth ions using oxygen- and phosphorus-doped porous graphitic carbon nitride

Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

Structural Modification of Polyacrylic Resin by Hydroxamic acid to Increase the Adsorption Performance for rare Earth ions

Adsorption of rare earth ions from highly saline media by a pyridine-modified activated carbon sorbent

Iron nanoparticles synthesized using Euphorbia cochinchinensis leaf extracts exhibited highly selective recovery of rare earth elements from mining wastewater: Exploring the origin of high selectivity

Selective Separation of Rare Earth Ions from Mine Wastewater Using Synthetic Hematite Nanoparticles from Natural Pyrite

What are the different biomolecules involved in the selective recovery of REEs from mining wastewater using FeNPs synthesized from two plant extracts?

Selective and fast recovery of rare earth elements from industrial wastewater by porous β-cyclodextrin and magnetic β-cyclodextrin polymers

Phosphorylated porous phenolic resin for efficient extraction of low-concentration rare earth elements from tailing wastewater

Recovery of rare earth by electro-sorption with sodium diphenylamine sulfonate modified activated carbon electrode

Recovery of rare earth elements from NdFeB magnet by mono- and bifunctional mesoporous silica: Waste recycling strategies and perspectives

Rare Earth Metal Ions Adsorption Using 2-[2-Oxo-2-(1-pyrrolidinyl)ethoxy]acetic acid/Sodium Alginate Gel

Highly efficient recovery of heavy rare earth elements by using an amino-functionalized magnetic graphene oxide with acid and base resistance

Regulation of pyruvate metabolism in metabolic-related diseases

Selective adsorption and high recovery of La<SUP>3+</SUP> using graphene oxide/poly (<i>N</i>-isopropyl acrylamide-maleic acid) cryogel